Thread tapping center

CMA FTC 3015

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. Nwjdoyuu Scepfx Ag Ion We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Nwjdsvxlq Hopfx Ag Ijn Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Nwsdecx Smbopfx Ag Isn Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. Pressure : 6 bar incl . electronic control incl . booster pump

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm Njdsx U U Ekspfx Ag Iown - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: used, Year of construction: 1988, Technical details: Nwjdpfxsw D Aq Te Ag Ijn pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Nsdpfx Aev S Uz Ieg Iswn Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: used, functionality: limited functionality, 1.Equalizer. - shaft width 260 mm - length of tabletops 1560 mm 2.Thicknessing machine Nodpoqwg Efofx Ag Ijwn - thickness of the workpiece 180mm 3.Drilling machine - max tool diameter 18 mm - drilling depth 80 mm - drilling width 140 mm - table top adjustable up/down front/back and sideways 4.Circular saw - NO SAW BLADE 5.Milling machine - Spindles 30 mm - Adjustable spindle CONDITION AND COMPLETENESS AS IN PICTURES

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; Nsdpfxsiidm Nj Ag Iown - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm Nwjdpfx Ajz H Dyjg Ion electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed Nodpsyy A Iqjfx Ag Iown - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...