Condition: good (used), Year of construction: 2004, operating hours: 66,973 h, Functionality: fully functional, machine/vehicle number: 28109, screw diameter: 22 mm, injection pressure: 2,864 bar, total length: 2,270 mm, total width: 1,118 mm, total height: 1,800 mm, overall weight: 2,000 kg, heating capacity: 3.8 kW (5.17 HP), power: 11 kW (14.96 HP), input frequency: 50 Hz, input voltage: 230 V, input current: 80 A, Equipment: documentation/manual, Battenfeld injection molding machine in good condition, disconnected in mid-2024 to make room for a new machine in the department. Fully functional, with EEC declaration of conformity. Djbvjvx Tflem Rr Nskl

Condition: good (used), Year of construction: 2000, operating hours: 38,900 h, Functionality: fully functional, clamping force: 9 kN, screw diameter: 115 mm, displacement volume: 5,349 cm³, injection pressure: 1,600 bar, injection weight: 5,062 g, STORK 900 T injection molding machine Clamping force: 900 T Reference : SXN 9000-8600 Year : 2000 Dksbvm Rsq Iyazer Nel Screw diameter : 115 mm Max. material pressure: 1600 bar Injection volume : 5349 cm3 Injection capacity : 5062 g Injection speed: 599 mm/s Plasticizing: 123 g/s Distance between columns (H x V): 1010 x 1010 Column diameter: 190 mm Number of hours: 38,900 h

Year of construction: 2003, Condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Debvm Reiiv Aqjr Nekl

Condition: good (used), Year of construction: 2001, operating hours: 51,500 h, Functionality: fully functional, clamping force: 14 kN, screw diameter: 133 mm, displacement volume: 8,336 cm³, injection pressure: 1,600 bar, injection weight: 7,919 g, STORK 1400 T injection molding machine Clamping force: 1400 T Reference : SXN 14000-12500 Year : 2001 Dsbvmeq Iyb Hs Rr Njkl Screw diameter : 133 mm Max. material pressure: 1600 bar Injection volume : 8336 cm3 Injection capacity : 7919 g Injection speed : 771 mm/s Plasticizing: 143 g/s Distance between columns (H x V): 1300 x 1300 Column diameter: 220 mm Number of hours: 51,500 h

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation. Dkobvm Remk Taajr Nsl

Condition: good (used), Year of construction: 2008, operating hours: 60,700 h, Functionality: fully functional, clamping force: 8,000 kN, clearance between the columns: 1,100 mm, BILLION bi-material injection press 800 T Locking force: 800 T Reference: H780/4200 Year: 2008 - H780 injection unit: 45 mm screw - Injectable volume of 341 cm3 - Injection pressure of 2276 bars Dkobvmjvrfdas Rr Njl - sfcw shnH4200 injection unit: 80 mm screw - Injectable volume of 2261 cm3 - Injection pressure of 1863 bars Passage between columns (H x V): 1100 x 1100 mm Plate dimensions (H x V): 2400 x 1570 mm Max. mold thickness: 1300 mm Minimum mold thickness: 350 mm Max. opening stroke: 1100 mm Hydraulic cores: 6 Rotating base G4 270mm digital Machine dimensions: 10200 x 2730 x 3533 mm

Year of construction: 2012, Condition: ready for operation (used), There are three identical machines available, screw diameter: 70mm, operational hours counter machine 1/ 2/ 3: 65,000/ 60,000/ 46,345h, year of construction machine 1/ 2/ 3: 2007/ 2008/ 2012, for each machine there is one Handling Robot Wittmann W731 available. Dksbvm Rroidyd Ss Njl

Year of construction: 1999, Condition: ready for operation (used), Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power. Dkebvmjnxk Ifs Rr Nsl

Year of construction: 2000, Condition: ready for operation (used), Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h. Dkobveq Sxhfem Rr Nsl

Year of construction: 2017, Condition: ready for operation (used), Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation. Dkjbvm Rek N Dndsr Nel

Year of construction: 2014, Condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Dksbvm Reh Nypfjr Nol

Year of construction: 1991, Condition: ready for operation (used), Clamping force: 800kN, weight: 4.3t. Dkobvm Rrjh I T D As Njl

Year of construction: 1995, Condition: ready for operation (used), Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t. Djbvm Rsh H Nrzor Nokl

Year of construction: 1986, Condition: ready for operation (used), Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed. Djbvm Rrepvkzys Njkl

Year of construction: 2008, Condition: ready for operation (used), Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t. Dksbvm Rjmrrh Uer Njl

Year of construction: 1995, Condition: ready for operation (used), Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools. Dkobvmjlc N Sae Rr Njl

Year of construction: 2003, Condition: ready for operation (used), Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. Dksbvm Rremrri Do Nsl

Year of construction: 2007, Condition: ready for operation (used), Hydraulic operating pressure: 275bar, weight: 4.1t. Dobvm Rrem Ncizo Nekl

Year of construction: 2004, Condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Dkobvm Rrep S Srho Nsl

Condition: ready for operation (used), Year of construction: 2003, max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg. Dksbvjr Dd Iasm Rr Nol

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Dksbvm Rsuiykdor Nsl

Year of construction: 1997, Condition: ready for operation (used), Operating pressure: 210bar, injection force: 693kN, clamping force: 3500kN, opening stroke: 700mm, mold installation height: 600mm-950mm, power: 118kW, operating hours: 176,533h, cycles: 1,569,030. documentation available. On-site inspection is possible. Djbvm Rouku Sger Njkl

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Debvmet E Tq Rj Rr Nekl

Year of construction: 1998, Condition: ready for operation (used), Five identical Arburg injection molding machines are available. Clamping force: 800kN, column distance: 420mm/420mm, installation height: 250mm, platen distance: 700mm, nozzle diameter: 45mm, weight: approx. 3800kg, control: Selogica 3.020. All machines include temperature control unit and conveyor belt. Documentation available. The machines are in storage. On-site inspection is possible. Dksbvm Rrsviv Dfe Njl

Year of construction: 2001, Condition: ready for operation (used), Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm. Dkebvmsr A Eiie Rr Nel