Condition: excellent (used), Year of construction: 2011, Wittmann Battenfeld EcoPower 110/130 injection molding machine Electric machine, energy efficient Control :UNILOG B6 Year of production : 2011 Closing force 110 tons Auger diameter 25 mm Injection weight max. 55.8 gPS Column spacing 470x470 mm Min. tool height 200 mm Max. tool height 450 mm Hydraulic working pressure 210 bar Dsbvblaorn I Nrerjcg Machine weight 4600 kg L. 420 x width 140 x height 270 cm, Battenfeld has about 60000 hours (in the machine the computer was changed and the hours were not recorded there, now it has less hours 4944)

Year of construction: 2005, Condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Dcebjv Extzsvblareg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 97,307 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 94 g, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Injection unit - plasticizing cylinder: B Screw diameter: 30 mm L/D ratio: 20 Specific injection pressure: 1,995 bar Displacement volume: 106.0 cm³ Injected part weight (PS): 94 g Max. dosing path: 150 mm Max. nozzle path: 200 mm Nozzle immersion depth (SVO): 40 mm Nozzle contact force: 60 kN Installed cylinder heating: 8.3 kW Filling hopper capacity: 35 L Debvblev Exblsarjcg Total machine Oil tank capacity: 180 l Pump unit: 22.0 kW Installed total power: 30.3 kW Dry cycle rate according to EUROMAP 6a: 1.92 s - 259 mm Noise level (unpressurized circulation): 57.0 dB (AS) Noise level (power): 71.0 dB (AS) Switch-on time: 97,307 h Cylinder heating: 55,786 h Machine cycles: 3,160,294 Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: excellent (used), Year of construction: 2008, operating hours: 24,896 h, Functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, ejector stroke: 150 mm, plate length: 750 mm, plate width: 750 mm, total length: 5,800 mm, total width: 1,700 mm, total height: 2,300 mm, overall weight: 9,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine ENGEL VICTORY 1050-130 Tech warehouse no.: 503505 manufacturer: ENGEL type: VICTORY 1050-130 Tech controller: CC200 year of construction: 2008 operation hours: 24896 h technical data clamping unit clamping force: 1300 kN size of mould plates h x v: 750 x 750 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 61 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm weight of mould: 540 kg technical data injection unit screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1650 bar screw length: 20 l/d screw stroke: 215 mm screw speed: 230 min injection rate into the open: 230 g/s PS number of heating zones: 5 nozzle stroke: 350 mm measures & weight measures of machine l x w x h: 5.8m x 1.7m x 2.3m total weight: 9500KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. water flow regulator machine without material hopper Dcsbvbsugvxrslareg machine without safety fencing Anti vibration mounts interface EUROMAP 67 interface for ejector plates safety Schuko-socket 10A mould heating 8x

Condition: good (used), Year of construction: 1992, Closing force 500 KN Screw diameter 30 mm Weight 3,200 KG Dsbvevygh Nsblarocg

Condition: excellent (used), Here we offer a SmartPower 210/1330 thermoset machine. Wittmann Battenfeld injection molding machine with control UNILOG B8 Machine was serviced / checked by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021. checked and updated to the latest possible status Within the scope of the complete inspection, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already existing pressure switches, the plant offers the possibility to the possibility to install additional cavity pressure switches (2 pieces Kistler module for cavity pressure changeover, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the cavity pressure switch upgrade are included in the scope of delivery. Injection moulding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main machine dimensions Noise level (DIN EN ISO 3744-46) 65 dB(A) Ambient temperature +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours of 1437 hrs. Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max (HLP 32) min 30°C (86°F) / max 40°C (104°F) Oil temperature min / max (HLP 46) min 40°C (104°F) / max 50°C (122°F) Switch-on temperature for oil cooling (HLP 32) 35°C (95°F) Switch-on temperature for oil cooling (HLP 46) 45°C (113°F) Electrical system: Drive power, Hydra. Pump 37kW Motor voltage Frequency Screw barrel temperature 350°C (662°F) max. Dobvblefphtvearecg Water system: Oil cooler: Cooling water connection [...]

Condition: like new (used), Year of construction: 2000, Injection molding machine Arburg 520C 2000-675 Year of manufacture: 2000 Closing unit Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Dsbvbljq Tbdkjarocg Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electric-hydraulic equipment Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Year of construction: 2013, Condition: ready for operation (used), A Boy injection molding machine is available. Clamping force: 100kN, tie bar distance (diagonal): 205mm, max. platen distance: 250mm, ejector stroke: 50mm, screw diameter: 14mm, stroke volume range: 1cm³/15.3cm³, machine dimensions X/Y/Z: approx. 1500mm/550mm/1400mm, weight: approx. 500kg, control: Procan ALPHA. Documentation available. On-site inspection is possible. Dcobvbsv Ext Ijlarjg

Condition: excellent (used), Year of construction: 2021, operating hours: 4,488 h, clamping force: 4,780 kN, screw diameter: 70 mm, clearance between the columns: 850 mm, injection pressure: 1,890 bar, ejector force: 1,340 N, ejector stroke: 180 mm, opening stroke: 710 mm, plate length: 1,270 mm, plate width: 1,220 mm, TEDERIC electric injection molding machine 478 T Year: March 2021 Reference DE478-E2300C Screw diameter : 70 mm L/D ratio : 20 Injectable volume : 1251 cm3 Injection weight in PS : 1138 gr Injection pressure : 1890 bars Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power : 33 KW Distance between tie-bars: 850 x 800 mm Mould thickness: 320-800 mm Closing stroke: 710 mm Dcobvjvff Uxoblarog Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blowers EUROMAP 67

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, Functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Dcobvev D Nxlsblareg Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: good (used), Year of construction: 2016, clamping force: 800 kN, Very good condition - CC300 control - Maintained exellent from big danish manufacturer. Dcsbvovib N Toblarsg

Condition: good (used), 1x used Engel Victory 330H80V/80 Combi incl. belt and robot Ma-No. 168769 Year of manufacture: 2008 Screws: 40 mm and 22 mm Core pulls: 2x Operating hours: approx. 62,000 hours Dcjbev D Hcbsvblarjg

Year of construction: 2006, Condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Dcobok Rnvmjvblarsg Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Year of construction: 1995, Condition: good (used), MOVING conveyor (1995) Conveyor moving 1995 šírka - 130cm dĺžka - 200 cm Dobeu H Uw Aovblarocg výška - 120 cm NASTAVITEĽNÁ

Condition: good (used), Year of construction: 2022, clamping force: 3,880 kN, screw diameter: 65 mm, displacement volume: 929 cm³, injection pressure: 1,890 bar, injection weight: 846 g, total length: 6,000 mm, total width: 700 mm, TEDERIC electric injection molding machine 388 T Year: December 2020 Reference DE388-E1700C Screw diameter : 65 mm L/D ratio: 20 Injectable volume : 929 cm3 Injectable weight in PS : 846 gr Injection pressure : 1890 bars Screw rotation speed: 250 rpm Injection speed: 160 mm/s Total power: 89 KW Distance between tie-bars: 750 x 750 mm Mould thickness: 280-750 mm Closing stroke: 650 mm Platen dimensions: 1100 x 1060 mm Machine weight: 18 T 4 hydraulic cores Debvblaovc Hmqerscg 3 blowers EUROMAP 67

Condition: good (used), Year of construction: 2003, Functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 770 mm, plate width: 745 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,120 mm, overall weight: 6,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 745 x 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 4.4m x 1.5m x 2.12m total weight: 6000KG equipment included screen text german CEE-socket 16A CEE-socket 32A core pulling hydraulically 2x air valve moveable WAP machine without material hopper machine without water flow regulator Dsbevxgqnsvblarecg Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A

Condition: excellent (used), Year of construction: 2006, clamping force: 800 kN, column diameter: 30 mm, 3 pcs of Very well maintained 2K machines from big Danish Manufacturer. Dcobvbjv Du U Sslarog Always maintained 100%

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production * Dsbvstuncceblarjcg

Year of construction: 2004, Condition: excellent (used), Injection molding machine Arburg 470C 1500-350 Year of manufacture: 2004 Control - Selogica Geiger robot TECHNICAL DATA Screw diameter [mm]: 35 Injection weight [g]: 127 Injection pressure [bar]: 2500 Closing force [kN]: 1500 Distance between columns [mm]: 470x470 Plate size [mm]: 650x650 Mold height min. [mm]: 250 Dobemfr A Hevblarocg Power [kW]: 41,9 Dimensions [m]: 4600 x 1700 Weight [kg]: 4560 Equipment Pneumatically operated doors GK control Hydraulic cores on proportional Euromap Actionica remote control

Condition: repair required (used), Year of construction: 2006, operating hours: 6,000 h, Functionality: not functional, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, displacement volume: 679 cm³, injection pressure: 2,006 bar, injection weight: 618 g, Injection press KRAUSS MAFFEI 200 T Locking force: 200 T Reference: KM 200 CX G03 Year: 2006 Screw diameter: 60 mm Maximum material pressure: 2006 bars Injectable volume: 679 cm3 Injection capacity: 618 g Injection flow rate: 283 cm3/sec Debjvxkt Tevblarecg Passage between columns (H x V): 560 mm x 560 mm Dimension of the plates: 915 mm x 915 mm Number of hours: 6000 hours Machine for sale for parts or repairs to be done at the closing part

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, Functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, displacement volume: 5,655 cm³, ejector force: 118,000 N, ejector stroke: 300 mm, plate length: 1,690 mm, plate width: 1,960 mm, total height: 2,500 mm, overall weight: 76,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, injection moulding machine BATTENFELD HM 10000-9200 warehouse no.: 503007 manufacturer: BATTENFELD type: HM 10000-9200 controller: UNILOG B4 year of construction: 2003 operation hours: 67092 h technical data clamping unit clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm ejector stroke: 300 mm ejector force: 118 kN centering diameter of moving platen: 250 mm centering diameter of fixed platen: 315 mm technical data injection unit screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar screw length: 22 l/d screw stroke: 500 mm screw speed: 130 min Dcobsvw R Eysvblarsg screw torque: 11370 N plasticising rate: 144 g/s PS injection rate into the open: 1144 g/s PS number of heating zones: 8 nozzle stroke: 700 mm measures & weight measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG equipment included screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x

Condition: excellent (used), Year of construction: 2005, Arburg ALLROUNDER 720 S 3200-2100 injection molding machine Year of manufacture: 2005 Closing unit Closing force: 3600 kN (increased at the factory) Clamping force: 130 kN Opening force: 100 / 800 kN Max. opening stroke: 700 mm Minimum mold height: 300 mm Max. distance between clamping plates: 1000-1400 mm Clearance between columns: 720 x 720 mm Dimensions of mold clamping plates: 1040 x 1040 mm Max. weight of the moving mold half: 3300 kg Ejector force: 100 kN Ejector stroke: 250 mm Hydraulics, drive, other Hydraulic pump drive power: 55 kW Total installed power: 88.9 kW Control cabinet Safety standard: DIN EN 60204 Socket set: 1 x 16 A Injection unit Screw diameter: 70 mm Screw working length (L/D): 20 Cylinder capacity: max. 280 cm³ Injection volume: max. 1078 cm³ Injection weight (PS): max. 984 g Injection pressure: max. 2000 bar Debvsv Etacoblarecg Screw speed: max. 51 rpm Screw torque: max. 2247 Nm Nozzle pressure force: max. 90 kN Nozzle stroke: max. 600 mm Installed power of cylinder heaters: 6 x 4500 + 3300 W Installed power of nozzle heaters: 1000 W Machine dimensions and weight Net weight: 17000 kg Electric power supply: Motor + heaters: 125 A Heaters: 50 A Additional options Servo control technology with 2 control pumps Interface for robot system (according to EUROMAP 67, 50-pin) Electric axis control Interface for mold temperature control Interface for V24 printer Interface for PC keyboard ARBURG AES energy saving system Software package "Additional monitoring functions" Software package "Additional machine movements" Software package "Production control" Machine optimization / user support package Software package "Quality assurance" Documentation package

Condition: good (used), Year of construction: 2000, clamping force: 8,200 kN, screw diameter: 120 mm, clearance between the columns: 1,060 mm, displacement volume: 5,598 cm³, injection pressure: 1,147 bar, Sandretto 820 T injection press Reference: MEGA T 6434/820 Screw diameter 120 mm Year: 11/2000 Distance between columns: 1060 x 1060 mm Debvbovxkh Rjlarocg Injectable volume: 5598 cm3 Injection pressure: 1147 bars Mold thickness min max: 350 mm / 1100 mm Mold opening stroke: 1150 mm

Condition: excellent (used), Year of construction: 2002, Krauss Maffei KM 80 -160 C2 injection molding machine Year: 2002 Control version: MC 4 Closing system: Clamping force: 800 kN Mould opening force, max.: 55 kN Moving platen feed force Opening: 31 kN Moving platen feed force Closing: 20 kN Mould platen size (h x v): 610 mm x 610 mm Distance between connecting rods (h x v): 405 mm x 405 mm Mould opening stroke: 500 mm Min. mould height: 250 mm Max. daylight: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 20/11 kN Injection system: Screw diameter: 30 mm Ls/D ratio: 26 Injection pressure: 2025 bar Sweep volume: 85 cm3 Injection weight, PS: 77 g Electrical and hydraulic equipment Nominal pump motor capacity: 11 kW Installed heating power: 9 kW Adjustable barrel heating zones: 5 Number of drying cycles: 1800 1/h Tank capacity: 270 ltr. Dimensions and weight Machine dimensions: 3.81 m x 1.40 m x 2.00 m Total machine weight: 3200 kg Djbov Dhnlevblarscg Max. mold weight: 860 kg

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, clamping force: 4,780 kN, screw diameter: 70 mm, displacement volume: 1,251 cm³, injection pressure: 1,890 bar, injection weight: 1,138 g, TEDERIC electric injection press 478 T Year: March 2021 Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 gr Djbvbljvxim Esarjcg Injection pressure: 1890 bars Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 KW Distance between columns: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Plate dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67