Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA Dusbsvkqfao Em Skgot mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Year of construction: 2019, Condition: used, overall weight: 140 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Duobev D N Ndj Em Skgjt

Condition: excellent (used), Year of construction: 2012, Clamping Unit • Clamping Force: 50 Ton • Opening Force (max): 40 kN/mm • Mould Height (fixed/variable min): 200 mm • Platen Daylight (fixed/variable max): 450-550 mm • Weight of Movable Mould Half (max): 230 kg • Ejector Force/Stroke (max): 30 kN / 70 mm Injection Unit (100) • Screw Diameter: 20 mm • Effective Screw Length (L/D): 25 • Injection Volume: 31 cm³ • Shot Weight: 29 g (PS) Machine Specifications • Weight of Machine: 3,049 kg Dsb Em Sksvtn Nbogjut • Transport Dimensions: 2.7 m x 1.5 m x 2.2 m • Transport Weight: 3.6 tons Safety • Barrier: Optical barrier only (no mechanical barrier). 2x hydraulic core puller

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 80-750 CX warehouse no.: 503569 Dujb Emev D H Ans Skgot manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h technical data clamping unit clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 150 mm ejector force: 23 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1000 kg technical data injection unit screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar screw length: 22 l/d screw speed: 355 min injection rate into the open: 143 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG equipment included screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, Operating hours approx. 65,000 h Screw diameter 30 mm - wear-resistant Dueb Em Skev A Szyegst Column spacing 370 x 320 mm 1 core pull, air valve, 5 x hot runner system

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: Dob Emjrp Dyrj Skgeut YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year: 2014 Type of inspection: NC5 Number of hours: 39,660 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 420 tons Opening stroke: 770 mm Between columns: 820 x 820 mm Plate dimensions: 1200 x 1200 mm Minimum/maximum mold: 350/1020 mm Maximum gap between plates: 1790 mm Screw diameter: 60 mm Screw length: 25T cm3: 763 Bars: 2106 Motor power: 135 kW Heating power: 27.9 kW Closing weight: Deb Emov I Uz Hs Skgjut Injection weight: 24 tonnes Length dimensions: 8 m Width dimensions: 2.2 m Height dimensions : 2.70 m Robot interface: YES Bi-metal: YES Other: 2 BLOW GUNS, 3 batteries on injection, 16 hot runners, pneumatic shutter nozzle, 3 programmable inputs, mixer/mixer tip screw

Condition: used, Year of construction: 2013, operating hours: 33,000 h, clamping force: 55 kN, screw diameter: 32 mm, displacement volume: 965 cm³, injection pressure: 2,127 bar, overall weight: 2,300 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Manufacturer: BOY Type: BOY 55E Condition: technisch überarbeitet Operating hours: ca. 33.000 CLAMPING UNIT: - Clamping force: 55 t Öffnungsweg: 400 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): 360 x 335 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: IU205 Screw diameter: 32 mm Injection weight in polystyrol: 92,3 g Stroke volume: 96,5 cm³ Einspritzdruck: 2.127 bar CONTROL: PROCAN ALPHA Screen language: DE / EN / IT / ES Operating manuel: DE EQUIPMENT: - Core pulls: - Deb Em Sotug Thokgjut Air valves: 1x (Steuerung) Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 7,7 kW Pump drive power: 11,0 kW Total installed power: 18,7 kW Total weight: 2.300 kg Total size L x B x H: 3,5 x 1,2 x 2,1 m

Condition: excellent (used), Year of construction: 2003, Engel VC750/150 , tiebarless machine Controll panel: CC100 Clamping force: 150 t Plate dimensions: 750x520 mm Opening Stroke: 605mm Dsb Em Skjvi Rzrogjut Screw dia: 50 mm Max. swept wolume 393 cm3 Injection rate: 283 cm3/s Injection pressure: 1439 bar Nozzle stroke 350 mm Working hours only: 38987 Weight 9100 kg L 5200 x W 1700 x H 2000 mm 2x core pull Condition: fully funtional Videos on request.

Year of construction: 2001, Condition: excellent (used), Year of manufacture 2001 Closing force 50 ton Deb Emef Tiq Ss Skgout Screw diameter 25 mm Injection pressure 2000 bar Shot weight. 54 gr Core pulls 4

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, clamping force: 450 kN, screw diameter: 22 mm, Number of operating hours approx. 45,000 Screw diameter 22 mm 1 core pull Handling interface Djbjv A Sypj Em Skgjut

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Djbov Iz Umj Em Skgsut Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Condition: used, Year of construction: 2012, operating hours: 36,000 h, Year: 2012 Type of inspection: MC5 Number of hours: 36,000 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 110 tons Dsb Ejv I Uyvsm Skgjut Opening stroke: 600 mm Between columns: 470 mm x 470 mm Plate dimensions: 745 mm x 770 mm Minimum/maximum mold: mm Maximum spacing between plates: 900 mm Screw diameter: 70 mm Screw length: 20T cm3: 393 Bars: 1898 Motor power: 22 kW Heating power: 15.62 kW Closing weight: 6.2 tons Length dimensions: 4.90 m Width dimensions: 1.60 m Height dimensions: 2.10 m Cores: 2 HYDRAULIC CORES Robot interface: YES Bi-metal: YES

Year of construction: 2005, Condition: ready for operation (used), Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible. Deb Em Skev Ip Rvjgeut

Condition: like new (used), Year of construction: 2017, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Duob Eou Epy Njm Skgst Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 12.500 h

Condition: excellent (used), Year of construction: 2002, Arburg 320S 500-150 injection molding machine WITH SIDE MULTILIFT ROBOT Year of manufacture 2002 Selogica control Closing zone Closing force 500 kN Minimum mold height min 225 Column spacing 320 x 320 mm Dimension of mounting plates 472 x 472mm Opening stroke of mold 350mm Maximum opening width 575mm Injection unit Screw diameter 30mm Injection weight (ps) 71g Injection volume 78 cm3 Specific injection pressure 2210 bar Power supply and dimensions Pump motor power 15 kW Heater power 8.4 kW Installed power 26 kW Weight of the machine 2.25t Duob Emjqqkg Ao Skgot

Condition: used, Year of construction: 2011, operating hours: 39,000 h, Year: 2011 Control type: CC200 Number of hours: 39,000 Storage location: MECA PLASTIC Delivery time: AVAILABLE Closing force: 160 mm Opening stroke: 600 mm Dusb Emjv I Uxre Skgjt Between columns: 850 x 750 mm Plate dimensions: 850 x 750 mm Minimum/maximum mold: 300 mm Maximum gap between plates: 900 mm Screw diameter: 30/35 mm Screw length: 20T cm3: 113/192 Bars: 2400/2390 Motor power: 30 kW Heating power: 16 kW Closing weight: 9.5 tons Injection weight: Length dimensions: 5.8 m Width dimensions: 1.7M Height dimensions: 1.4M Cores: 5 Robot interface: Yes Bi-metal: Yes Other: 8 sequential, 12/1 24-zone hot runners, Viper robot, conveyor belt

Year of construction: 1998, operating hours: 62,144 h, Condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Duob Em Skjv Ifwxoget

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Djb Em Sjva H Amskgjut Working hours: 46.511 Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2019, Year: 2017 Control type: CC300 Number of hours: 20,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 160 T Opening stroke: 460 mm Between columns: 520 mm x 520 mm Plate dimensions: 760 mm x 760 mm Minimum/maximum mold: 250/600 mm Maximum spacing between plates: 1060 mm Screw diameter: 35 mm Screw length: 20T cm3: 154 Bars: 2000 Motor power: 21 kW Heating power: 9.2 kW Closing weight: 8.4 T Length dimensions: 5.90 m Width dimensions: 1.70 m Height dimensions: 2.20 m Cores: NO Dob Em Skov I Uw Iegout Robot interface: YES Bi-metal: YES

Condition: like new (used), Year of construction: 2017, Clamping unit: 50 ton Oppening stroke (max. kN/mm) : 30 / 250 Dsb Eou Ep Imsm Skgsut Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2.500 bar Working hours: 19.719 Equipment: 3x hot runner 1x hydraulic core puller 1x pneumatic core puller

Condition: used, Year of construction: 2017, operating hours: 19,500 h, Year: 2017 Type of inspection: SELOGICA Number of hours: 19,500 Dsb Emsv I Uvko Skgeut Storage location: FRANCE Deadline: MECA PLASTIC Closing force: 60 T Opening stroke: 300 mm Between columns: 370 x 370 mm Plate dimensions: 510 x 510 mm Minimum/maximum mold: 200/400 Maximum gap between plates: 700 mm Screw diameter: 30 mm Screw length: 20/D cm3: 85 Bars: 2000 Motor power: 19 kW Heating power: 9.4 kW Closing weight: 4 tons Injection weight: 77 grams Length dimensions: 3.5 m Width dimensions: 1.4 m Height dimensions: 1.8 m Cores: 0 Robot interface: yes Bi-metal: yes Other: 1 blower

Condition: excellent (used), Year of construction: 2010, Engel Victory 80/50 Spex Clamping force: 50 ton Opening stroke: 400 mm Mould height Min-max: 200 mm Dob Emouy Rmye Skgsut Total daylight max. 600 mm Platen size: 500x450mm Mould weight max: 450kg Screw: 18mm screw Injection capacity: 25 cm3 Serial: 176053 + robot picker Engel USP (universal picker)

Condition: good (used), Year of construction: 2001, Clamping force: 25/35 tons Opening stroke: 200 mm Dusb Em Seuwr Dhokgst Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 40.882

Condition: like new (used), Year of construction: 2013, Clamping force: 1100 t Screw diameter: 90 mm Distance between tie bars V: 1150 mm Distance between tie bars H: 1400 mm Shot volume: 3050 cm3 Type: Horizontal Drive: Hydraulic Dsb Eovnmdmom Skgout Machine has only 3500 hours used only for test production. CC200 controll Robot Linear