Condition: excellent (used), Year of construction: 2014, Engel Duo 11050/800 Baujahr: 2014 Screw dia: 135mm Injection volume: 8158cm3 Tie bar distance: 1170x 1000mm (HxV) Ceb Hb Eowc Edyepujgt Viper 40 robot

Condition: used, Year of construction: 2019, clamping force: 700 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, injection pressure: 1,780 bar, overall weight: 34,000 kg, Freight basis: ex-site Delivery time: by arrangement Cgsb Hbjwc D T Hs Epuet Payment terms: 100% before taking delivery of the machine, net

Year of construction: 2004, Condition: excellent (used), Capacity - 400 performs/min. Year - 2004/2008 Factory Consists : 1. Injection Moulding machine -Manufacturer - KRAUSS MAFFEI - Year - 2004 - Tip - 175-3500 CV - Power - 110 Kw - Clamping force - 1750 KN 2. Robot with Catcher for 48 performs - Year - 2004 - Tip - CB-PET 40 Fach 3. Preform Cooling Unit - Manufacturer - MHC Luksemburg - Year - 2004 - Tip - PL3 4. Injection Moulding Tool - Manufacturer - MHT Luksemburg Cob Hjgbpnmsb Epusgt - Year - 2004 - Preform Weight - 40,56 gr - Ejection Stroke - 114 mm - Weight of tool - 1150 Kg 5. Granulate Dryer - Manufacturer - PIOVAN - Italy - Tip - DP 625 - Year - 2004 - Power - 110 Kw 6. Granulate Silo - Manufacturer - PIOVAN - Year - 2004 - Tip - 4000 7. Cooling sistem - Manufacturer - PIOVAN -YEAR - 2004 - Tip - RPA 1200 - Power - 10,5 Kw 8. Crane - Year - 2008 - Tip - KVATP 2515E3 - Capacity - 5 tons - Dimensions - 7,5 x 2,0 mC -

Year of construction: 2001, Condition: excellent (used), Hydraulick engine DMT 250 Danhrss Year of manufacture 2001 Cgobowfg Sde Hb Epujt

Condition: good (used), Year of construction: 1998, operating hours: 65,000 h, clamping force: 3,300 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,039 cm³, injection pressure: 1,400 bar, injection weight: 940 g, DEMAG ERGOTECH 330 T injection molding machine in good condition Reference: Ergotech E330-1450-NC4S Year: 1998 65,000 operating hours Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1039 cm3 Injectable weight in PS: 940 g Injection pressure: 1400 bar Maximum dosing stroke: 270 mm Csb Hb Epswcq A Uoujgt Heating power: 27 kW Plate dimensions: 1040 x 950 mm Distance between columns: 710 x 630 mm Mold thickness: 330 - 710 mm Maximum opening stroke: 675 mm + SEPRO robot type 3031 YN MPA II X axis: 2500 mm Y axis: 800 mm Z axis: 1400 mm Machine dimensions: 6.50 x 2.00 x 2.30 m Machine weight: 14,300 kg

Condition: like new (used), Year of construction: 2008, operating hours: 56,000 h, Functionality: fully functional, machine/vehicle number: 170722, screw diameter: 25 mm, Technical data Manufacturer Engel Type e-max 310/100 Serial number 170722 Year of construction 2008 Operating hours approx. 56034 and approx. 58,000 Dimensions L/W/H 4.7 x 1.2 x 1.9 mtr. Weight 4400 kg Fully functional Condition very well maintained Cob Hbot U Agmj Epuegt Special Control unit cc 200 Auger ⌀ 25 mm Injection weight 55 gr. Injection pressure 2400 Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Mold mounting height 150 - 450 mm Opening stroke 350 mm Ejector stroke/force 100 mm /24 kN Hydraulic clamping unit Motor power 16 kW Heating capacity 9.2 KW /4 zones Total output 25.2 KW The machine is available from September in our warehouse in Hanover/Germany and has been tested. Extras core pull full-electric drive Tool heating 12 ejector plate safety device German and English screen language incl. complete documentation guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover/Germany

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm B9Wbl2Xapk Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Cgobswc A T Se Hb Epuot Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Here we offer a maintained injection molding machine. Arburg 2-color injection molding machine horizontal vertical Aggregate Masch.Nr : will be informed on request Arburg 420C 1000-150/150 year of construction: 2004 Control : Selogica Extras: 2X core pull (conc. travel, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Interface master computer Interface dyeing unit Cgsbehyumge Hb Epujt Interface conveyor belt Machine prepared for Multilift Selecting unit w. connection installation height extended to 350 mm high wear resistant screws connection blow-out unit 2-color /horiz.vert. unit incl. diskettes/CF cards - complete documents/manuals closing force: 100 tons/1000 kN tie bar distance 420 x 420 mm WKZG plates: 570 x 570 mm opening stroke 500 mm max. dist. plates 850 mm height of tooling: 350 mm 1.injection unit (150 er) screw: 30 mm (highly wear resistant) Injection weight: 65 gr. Injection volume: 78 ccm Injection pressure: 2210 bar 2.injection unit (150 er) Screw: 25 mm (highly wear resistant) Injection weight: 45 gr. Injection volume: 54 ccm Injection pressure: 2500 bar Weight/Dimension Dimension: 4,63 x 1,3 x 3,9 mtr. (LXBXH) Weight: 4.000 kg connected load: 125 A pre-fuse free delivery to buyer's yard - buyer unloads at his own risk from truck bed. the machine is offered functionally tested the machine is in our exclusive property.

Condition: like new (used), Year of construction: 2019, FANUC ROBOSHOT S100iA FANUC ROBOSHOT ALPHA S100IA Cjb Hbjwcx Rtj Epuogt Operating hours: 10,839 hours Year of manufacture: 2019 100 tons Tiebar spacing: 460 x 410 mm Installation height: 520-220 mm 40 mm 3-zone screw Injection speed: 330 mm/s Injection stroke: 144 mm Ejector stroke: 120 mm

Condition: excellent (used), Year of construction: 2013, operating hours: 42,160 h, Functionality: fully functional, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Arburg 1500T 2000-400 rotary table vertical machine Machine no. 225999 You can find the complete equipment on the downloadable documents - machine card Control: Selogica « Year of manufacture, 2013 * Total machine cycles only 1,907,296 « Operating hours automatic 42160 Clamping unit Plate spacing: 700 mm Clamping force: 200 to/ 200 kN Tool installation height: 400 mm Table diameter: 1500 mm Angle of rotation: 180° Rotation time: 2.4 s min. Weight on rotary table: 1050 kg Ejector force: 45 kN/ 175 mm ejector travel Injection unit Screw diameter: 40 mm Displacement: 201 cc Injection weight: 184 gr. Injection pressure: 2000 bar Extras « 2-station rotary table 180° forward/backward alternating with servo-electric rotary drive and hydraulic fixing pin for fine centering of the rotary plate in the end position; separating protection between the closing and insertion area, height adjustable on the rotary plate to the tool bases, with the option of attaching media lines and connections for the tool bases - Rotary table diameter mm 1500 - Closing force max. kN 2000 Injection unit according to EUROMAP 400 Screw diameter 40mm Special model rotary table ergonomic design with the following features: © - Corrosion protection treatment for rotary table (VE 574/90) © - Water connections 2 circuits © -3 hydraulic connections for needle closure system © -3 x core pull © -Per station: one core pull and 2 x temperature control © -6 x tool temperature control © -12 zone tool heating circuits © -Kistler internal pressure sensors (2x) © -Temperature query for start-up parts Weight: 11,200 kg. Energy: 22KW motor - heating power: 9.4 KW 5 zones - connection value 100 A the machine is offered functionally tested Cgjb Hb Esuuf Iaepujt fully functional with commissioning guarantee - tested before dismantling For information about the machines we offer and our company - we only sell our own machines purchased from ongoing production from our Hanover warehouse - all machines offered are checked and tested before dismantling - we do NOT sell insolvency goods - we are NOT an agent who deals with third-party property. - all machines offered come from successful companies for which maintenance and care is a matter of course - all machines offered can be viewed in our warehouse

Condition: good (used), Year of construction: 2011, VC 750H/330V/220 COMBI CC200 controll Clamping force: 220 t Screw diameter: 50 mm Screw dia 2: 35 mm Cob Hb Epev I Ul Eousgt Shot weight: 361 g Shot volume: 392 cm3 Type: Uni Drive: Hydraulic Possible to buy Wittmann 821 robot extra

Condition: like new (used), Year of construction: 2007, operating hours: 58,263 h, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, Equipment: documentation/manual, Manufacturer: Arburg Type: 320C 500-170 Serial number: 203130 Year of manufacture: 2007 Operating hours: 58,263 h Dimensions: L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Fully functional Condition very well maintained Extras Handling interface Thermoplastic screw/barrel 25 mm, highly wear-resistant Selogica control system Injection unit Screw diameter 25 mm Injection weight 54 g/hp Injection pressure 2500 bar Injection volume 59 cc Clamping unit Clamping force 50 t/500 kN Tiebar spacing 320 x 320 mm Clamping platens 446 x 446 mm Cgsbev U Tl De Hb Epuet Mold installation height 200 mm Maximum spacing between platens 550 mm Ejector stroke/force 125 mm/30 kN Clamping unit hydraulic Motor power 11 KW Heating power 9.4 KW Total power 21 KW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - we are NOT an agent dealing with third-party property. - All machines offered come from successful companies for which maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Cob Hb Epovimd Njuegt Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Year of construction: 1996, operating hours: 32,750 h, Condition: good (used), full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) Cgsb Hb Epocud Nhjuet clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Cjb Hb Epjlc R Rxjusgt Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: excellent (used), Year of construction: 2008, We sell a complete injection unit Engel 60 mm with heating bands etc. as seen on photos Cgeb Hopbv E Ajb Epujt was mounted on an Engel Victory 1050 /180 machine fit on Victory from 160 until 220 tons (very little used only as exchange screw for a small series production)

Condition: like new (used), Year of construction: 2008, operating hours: 40,376 h, Functionality: fully functional, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, Equipment: documentation/manual, Manufacturer: Arburg Type: 320C 500-170 Serial number: 208575 Year of manufacture: 2008 Operating hours: 40,376 h Fully functional Condition: very well maintained Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Cgeb Hstzqz Ssb Epuot Selogica control system Injection unit Screw diameter: 25 mm Injection weight: 54 g/PS Injection pressure: 2500 bar Injection volume: 59 cc Clamping unit Clamping force: 50 t/500 kN Tiebar spacing: 320 x 320 mm Clamping platens: 446 x 446 mm Mold height: 200 mm Maximum spacing between platens: 550 mm mm Ejector travel/force 125 mm / 30 kN Clamping unit hydraulic Motor power 11 KW Heating power 9.4 KW Total power 21 KW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Dimensions L/W/H 3.12 x 1.43 x 1.99 Weight 2300 kg Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or carriage paid against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell machines purchased from our own production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - we are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course. - All machines offered can be viewed in our warehouse.

Condition: excellent (used), Year of construction: 2006, Here we offer a maintained injection molding machine. Cgeb Hbslc R Tde Epuet from the following machine we have other machines of the same type in stock with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras - installed Language: German Englisch - enlarged clamping plates (B-plates) - minimum installation height 250 mm - maximum plate distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - host computer interface Engel EMS - without material hopper or conveying unit Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. Dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH - available immediately in our warehouse Hanover free loading or free delivery against freight reimbursement - function tested (guaranteed function until first start-up)

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, Functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Special Cgjb Hb Epjub Umqjujt Control unit CC 200 Screw ⌀ 25 / 22 mm Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: like new (used), Year of construction: 2014, operating hours: 57,492 h, Functionality: fully functional, machine/vehicle number: 227349, clamping force: 400 kN, screw diameter: 18 mm, clearance between the columns: 270 mm, displacement volume: 23 cm³, injection weight: 21 g, Equipment: documentation/manual, Manufacturer: Arburg Type: 270C 400-70 Control unit: Selogica Year of manufacture: 2014 Operating hours: 57,492 h Machine number: 227349 Extras - Robot interface - Highly wear-resistant screw - Separation gate - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Continuous maintenance by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 t Tie-bar spacing: 270 x 270 mm Clamping platens: 446 x 446 mm Opening stroke: 350 mm Csb Hb Epev U Uhgsusgt Mold height: 200 mm min. Distance between platens max. 550 mm Ejector stroke: 125 mm Ejector force: 30 kN max. Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electrical system Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Pre-fuse: 50 A Weight: 2150 kg Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or carriage paid for Available from our warehouse in Hanover, Germany +++++ We have an additional 6 machines of this machine type with the same equipment in stock+++++ All prices are negotiable. 07 Arburg 270C 400-70 v. 2008 No. 208574 - 72,967 h - €10,000 Handling interface: - Screw 18 mm 06 Arburg 270C 400-70 v. 2011 No. 215701 - 61,134 h - €14,000 Handling interface: - Screw 18 mm 05 Arburg 270C 400-70 v. 2007 No. 215701 203129 - 89,470 h - €8,000 Handling interface: - 18 mm screw 04 Arburg 270C 400-70 v. 2014 No. 227349 - 57,492 h - €16,900 Handling interface: - 18 mm screw 03 Arburg 270C 400-70 v. 2010 No. 213142 - 78,394 h - €11,000 Handling interface: - 18 mm screw 02 Arburg 270C 400-70 v. 2010 No. 213141 - 75,942 h - €10,000 Handling interface: - 18 mm screw Information about the machines we offer and our company - We only sell machines purchased from our own production facility from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, Functionality: fully functional, machine/vehicle number: 190332, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN Cgjb Hb Epsgrzh Ejuet ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Cgeb Hb Ejubamvopuot Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: excellent (used), Year of construction: 2004, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Cgsb Hbeh Dr E To Epust Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: like new (used), Year of construction: 2006, operating hours: 50,332 h, Functionality: fully functional, machine/vehicle number: 200943, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 97 g, Manufacturer: Arburg Type: 420C 1000-290 Year of manufacture: 2006 Machine No. 200943 Control system: Selogica Operating hours: 50,332 h Clamping unit Clamping force: 1000 kN/100 t Tie bar spacing: 420 x 420 mm Mold clamping platens: 570 x 570 mm Ejector travel: 175 mm max. Opening travel: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Screw diameter: 30 mm Injection volume: 106 cc Injection weight: 97 g/PS Injection pressure: 2500 bar Extras Handling interface Hardened screw Weight/Dimensions 4.14 x 1.60 x 2.08 mtr. (L x W x H) Weight: 3650 kg Csbov U T Ncj Hb Epuegt Connected load: 80 A Warranty Warranty until first use Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell machines purchased from our own ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: like new (used), Year of construction: 2007, operating hours: 47,800 h, Functionality: fully functional, machine/vehicle number: 203241, Used injection molding machine - New screw with original Arburg Multilift H The machine has a complete history with all major repairs and component replacements such as the screw, cylinder, etc. (In addition, the annual oil and filter changes, etc., were of course performed.) See document for download Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: December 2007 Machine No. 203241 Control: Selogica Operating hours: 47,800 h Continuous maintenance by manufacturer Clamping unit Clamping force: 1500 kN/150 tons Tie-bar spacing: 470 x 470 mm Mold clamping platens: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Injection volume: 145 cc Injection weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras Multilift H Handling interface Core puller Cebevhb Iys Hb Epujgt - Available immediately from our Hanover warehouse, free on load or free to your door with freight reimbursement - Functionally tested (guaranteed functionality until first commissioning)