Used hydraulic single column presses over 125t for sale (39)

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections Bedpfx Abomr Hpce Iewk The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t Bodpfxev Rgwxe Ab Ijwk dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Bjdpfx Abeqy E I Rs Ijwk

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 250 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 110 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 750 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 2,200 mm, total width: 1,250 mm, total height: 3,700 mm, overall weight: 8,000 kg, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Bjdpevcb Tlofx Ab Iowk

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm Bedpfxjd Ih Nrj Ab Iowk work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Bodpfx Aod Swtaob Iswk Weight 1250 kg Good condition

Year of construction: 1992, condition: used, machine/vehicle number: 530, The STEINER hydraulic press was manufactured and developed with practical aspects in mind. The hydraulic device is located on the hydraulic tank behind the press. Control blocks and valves are easily accessible from the outside and can be quickly replaced if necessary. The hydraulic radial piston pump is located on the drive console and is connected to the motor and pump mount via a coupling. The press stand is indestructible and torsion-resistant Sthal welded construction. The ironing board is screwed to the stand. The hydraulic cylinders are screwed to the press stand from above and guided through the mounting holes in the appropriate direction. The piston is connected to the piston rods via a wear ring. Four-sided, diagonal, flat grooves on the stand allow for very precise movement. Hydraulic cylinders are made of high quality material and are designed for high pressures. The piston rods are ground and hard chrome plated. The cylinder tubes are honed from the inside. Seals that have been maintained over many years are characterized by high quality and tightness. The piston rods are guided by guide bands, which are characterized by very low abrasion and a long service life. The control, control and monitoring devices for all control devices are installed in the control unit. Mutual locks ensure that no two program processes can run at the same time. The electrical control is located in a closed control cabinet. Pressing force - 8000 kN Operating pressure - 285 bar Installation height - 850 mm Stroke - 250 mm Table surface - 1550 x 1450 mm Ram surface - 1550 x 1450 mm Stand passage - 1800 mm Bodpfx Abepgktco Ijwk Lateral Breakthrough in the stand on the right and left Width x height - 1300 x 1075 mm Table top thickness - 155 mm Width of the machine approx. - 3100 mm Depth approx. - 4300 mm Height approx. - 4660 mm Table height above hallway - 500 mm Table height under hallway - 755 mm Drive power - 55 kW Oil requirement approx. - 1400 liters Total weight approx. - 60 tons

Year of construction: 1974, condition: used, machine/vehicle number: 82, Hydraulic frame press for sheet metal stamping with a force of 630 tons, designed for cold stamping. The vertical frame press with a welded construction consists of a table and an upper plate that are connected with screws. An electrical cabinet is installed next to the press and an oil overflow tank is located deep in the foundation, which facilitates filling the press system with oil. The pressing units are removable, which makes their assembly and repair easier. The press is controlled with a button. The size of the slider stroke is ensured by adjusting the position of the end stop. 1. Nominal pressing force, tone 630 2. Rated working pressure of fluids, KN/cm 2,200 3. Slide stroke, mm 750 4. Slider speed, mm/s Bwjdpfopgkt Sjx Ab Iek a) at idle speed 215 b) during the working stroke 10 c) during the return stroke 120 5. The greatest distance between the table and the slider, mm 1400 6. Distance between posts, mm 2200 7. Table dimensions, mm a) from left to right 2220 b) front to back 1800 8. Thickness of stamping plate, mm 220 9. Table height above floor level, mm 410 10. Nominal force of the hydraulic washer, tf 250 11. Hydraulic cushion stroke, mm 350 12. Ejector speed, mm/s a) when going up 51 13. Press size, mm a) from left to right 5070 b) front to back 3000 c) height 7065 14. Press height above floor level, mm 5480 15. Weight of the press, kg 69400 Electric motor revolutions 1450 min-1 Operating voltage 400/230 V Mains frequency 50 Hz ± 1% Rated air pressure 0.7 Pa

Condition: excellent (used), Year of construction: 2021, operating hours: 50 h, Machine for sale in good condition it has low operating hours. Bodpfx Asxbb Hreb Iswk

Condition: like new (used), Year of construction: 2018, machine/vehicle number: STHP 80KN, functionality: fully functional, pressing force: 8 t, table width: 300 mm, total length: 200 mm, total width: 510 mm, total height: 1,320 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr with two-hand operation - floor model with and base frame Bodet Rhb Ijpfx Ab Iewk The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: refurbished (used), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Main control panel integrated into the control cabinet (mounted on the right side of the machine): Bjdow S Uazopfx Ab Iewk - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Year of construction: 1989, condition: ready for operation (used), machine/vehicle number: K 1283, A used bending machine from the manufacturer HMK. Bedjd Eg R Tepfx Ab Iowk The pressing power up to 500 t Year of construction: 1989 Machine number: 1283

Condition: good (used), functionality: fully functional, pressing force: 300 t, total length: 1,200 mm, total width: 2,800 mm, total height: 3,500 mm, ID105830 Bjdpjwhc H Asfx Ab Ijwk Hydraulic press Brand: Van De Graaf Type: HVK-300 Capacity: 300 tons

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 4701, functionality: fully functional, pressing force: 394 t, stroke length: 200 mm, table width: 51 mm, table length: 680 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Front: 510 mm Bsdpjwr Dvyefx Ab Iowk Side: 270 mm Press stroke: 200 mm Clear opening: 455 mm Table Table size: 510 × 680 mm Power and Drive Press force: 394 t Motor power: 15 kW Speeds Downward speed: 350 mm/s Working speed: 4 mm/s Return speed: 300 mm/s MACHINE DETAILS Height: 2,710 mm Width: 1,530 mm Depth: 1,610 mm Machine weight: 6,620 kg