VBW Asset Trade Weihenstephan GmbH

Condition: used, Year of construction: 1995, Concentrating plant for the juice industry. The plant dates back to 1977 and was rebuilt in 1992. It was extended and equipped with a new cooling tower circuit. The plant is designed for 6600 kg/h of cloudy apple juice. With a single-stage concentration, the juice is thickened from 12° to 25°Brix. Up to 71°Brix can be achieved in the second pass. Additional title: with aroma recovery Input quantity apple juice: 6600 kg/h Water evaporation: 4840 kg/h Discharge quantity concentrated juice: 1760 kg/h Steam consumption: 1685 kg/h Hnelhcowu N T Asdw Eop Length: 7,70 m Width: 6,70 m

Condition: used, Year of construction: 1996, Chamber pasteuriser for 4 pallets Hslewrbdujhcdw Eenp Additional title: Pasteuriser for 4 pallets Pallet spaces: 4 peace Length: 530 cm Width: 220 cm Height: 305 cm Material: stainless steel Position: free standing

Condition: used, Year of construction: 2005, Wet part of a bottling line with a capacity of 40,000 bph. 0.33 litre and 0.5 litre longneck bottles are used. Year of construction: 2005 Consisting of: -crate unpacker: Krones, Linapac II -bottle washer: Krones, Spiragrip KSG -empty bottle inspector: Krones, Linatronic 735 -glass bottle filler with crown corker: Krones, Sensometic -fill level control with infrared detection: Krones, Checkmat FM - IR -labelling machine: Krones Topmodul Type 407 -fill level inspection and labelling inspection with infrared detection: Krones, Checkmat FEM - IR crate packer: Krones, Linapac II E35 LT1G with buffer tables for empty and full crates Holhcowrbc Dedw Eenp Additional title: Filling plant for 0.33 L and 0.5 L Longneck bottles Capacity: 40000 Fl/h

Condition: used, Year of construction: 2017, Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers. Additional title: Glass bottle filling Nominal capacity approx.: 3750 bottles/h Formats: 0.33 L disposable Euro- and Vichy-bottles Running direction: left -> right Operation / Control: Filler: Siemens ET 200 SP, Touch Panel Helowgi Dxshcdw Esnp Position: free standing Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (=long-tube filler) control: Siemens S7, built in 2019), Bottle collection table, bottle transport

Condition: used, Year of construction: 2019, KEG Filling Plant Additional title: Semi-automatic keg filling system Performance approx.: 50 KEG/h Hnjlhcdwjwgddyj Eep Power: 2,5 kW Voltage: 230 V Frequency: 50 - 60 Hz Heating / Cooling: steam 1.5 - 2 bar, < 125°C Water: 2 - 3 bar, 80°C Compressed air: 5 - 6 bar Length: 860 mm Width: 760 mm Height: 2530 mm Weight: 130 kg Formats: Combi fitting Ø 75 mm, World KEG fitting Operation / Control: Control cabinet, Siemens 1200, Touch panel Material: stainless steel Position: free standing Features: 1 filling station with elevating protective housing, Gravity roller conveyors in the inlet and outlet, control cabinet with control unit, switch panel for CIP or product inlet

Year of construction: 1999, Condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Hnelhcewgc Uwsdw Eop Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (J. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4x fermentation vats (J.Albrecht, 1999, 25 hl), 1x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5x storage tank (J.Albrecht, 1999, 44 hl, 0.99 bar) and 6x storage tank (J.Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4x pressurised tank (J. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (J. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (J. Albrech, 1999), heatable, with switch cabinet 9. 283 litre CO2 liquid gas tank (Air Liquide, 1999, 20.7 bar) with weighing device Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Cast wort capacity: 20 hl Hnoljwgc Udehcdw Eop Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank

Condition: used, Year of construction: 2004, Repacking line for 0.5 litre glass bottles, consisting of three machines: 1. depalletising: Pallets with full modular crates are loaded and unstacked here, and empty crates are stacked and moved out. 2. repacking machine: This is where modular boxes of 20 are unpacked, 4-carrier cartons are unfolded and loaded/packed with bottles. 3. packer/palletiser Here, the 4-pack carrier cartons are packed into quill boxes, stacked on pallets and moved out of the system. Additional title: combined repacking system with palletizing Capacity approx.: 200 crates/h Formats: Bottle crate (400 x 300 mm) on Euro pallet (1200 x 800 mm) Hslhcdwjwgc Tmo Ejnp Running direction: right -> left Operation / Control: on-site control unit / Siemens PLC Position: free standing Base construction: Square tube construction bolted to the floor Features: depalletizing, unpacking, bottle transport, crate transport, carton unfolding, packer for the bottles in the cartons, packer for the cartons in the quill boxes, palletizing of the full crates, pallet infeed and outfeed, protective grilles, switch cabinets, control device Layer patterns: 2x2 bottles/carton, 2x4 crate, 5 layers / palet

Condition: used, Year of construction: 2005, Crate unpacker Additional title: Unpacking machine for glass bottles Performance approx.: 50000 bottles/h Air consumption: 0,0002 m³ / bottle Number of packing heads: 6 pc. Power: 24,5 kW Voltage: 230/400 V Hnslhewgc Spscdw Esp Frequency: 50 Hz Length: 6160 mm Width: 4120 mm Height: 5033 mm Weight: 2500 kg Formats: 0.5 l glass bottle (D=68.5 mm H=270 mm; Ale / Longneck), 0.33 l glass bottle (D=61 mm H=238 mm; Ale / Longneck) Running direction: across, right -> left Operation / Control: PLC, control box with touch panel Position: free standing Base construction: Square tube frame on spherical feet Features: 1 basic machine (lifting mechanism, horizontal linear unit, gripper head carrier, movement axes), 2 gripper head sets (frame with 6 ring gripper heads, 20 (24) ring grippers each, pulling device, manual changing device, container transport, container transport, safety device, electrical and pneumatic equipment Layer patterns: 6x20 across, 6x24 across, 20 plastic box (400 x 300 x 300 mm), 24 plastic box (400 x 300 x 270 mm),

Condition: used, Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type "ML667") - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system) Additional title: hot filling, with pasteurisation Capacity: 5000 bo/h Holhcowgc R Eedw Esnp Formats: 0.25 liter bottles, twist off caps Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Year of construction: 2010, Condition: used, Additional title: 10 hl brewing system with grist mill, wort cooling and hot water tank Cast wort capacity: 1000 l Hnslhcdwjv Av S No Esp Current: 17 A Voltage: 400 V Frequency: 50 Hz Operation / Control: Simatic Multi-Panel, Siemens CPU Features: Grist mill, mash tun, lauter tun, wort kettle, whirlpool, plate heat exchanger, wort aeration, hot water tank, lauter pump, wort cooling pump, hot wort pump, Pipework, valves, accessories, controls

Year of construction: 2016, Condition: used, Empty bottle inspector with inspection of: - Inlet inspection with rejection - Bottom inspection with foil detection - RGB sealing surface inspection - HF + infrared residual liquid inspection - Dual sidewall inspection - Side neck finish/thread inspection - foil detection in the side wall modules Setting of test bottle requirements and processing via RFID. Additional title: empty bottle control Capacity: 40000 bo/h Power: 1,6 kW Current: 7 A Hnjlhcdevy En Ujw Esp Voltage: 230 V Frequency: 5 Hz Formats: White and brown bottles; 0.33 litre longneck, 0.5 litre NRW and Euro Running direction: left -> right Features: Camera system, Two discharge systems for separating dirty and damaged bottles, remote maintenance module, software licence, self-monitoring system

Condition: used, 100 hl brewhouse in copper design Additional title: with copper brew vessels Brewsize: 10000 l Brew-frequency: 4 hours Hnelhjvy Dxrscdw Eep Capacity wort cooler: 10000 l/h Operation / Control: PLC control by Multibrau Plus; from 2019 Features: 1 mash/wort kettle with internal boiler, 1 lauter tun, lauter desk, spent grain screw, -line and -silo, 3 hop dosingtanks, 1 whirlpool, 1 trub tank, mash and wort pumps, ventilation-pipes/extractor, 2 CIP tanks, 1 2-stage-wort cooler, wort aeration, Control cabinets, control PC, steam distribution, condensate returns, condensate collection tank

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with two frame cooling zones and cone cooling. Most recently used as a beer storage tank with a usable volume of 150 hl. Additional title: vertical, coolable, insulated stainless steel tanks Gross volume: 15260 l Pressure capacity: 0,99 bar Max. operating temperature: 20 °C Cooling area: 6,95 m2 Length: 2,52 m Hjlhovu Tvvjcdw Eonp Width: 2,52 m Weight: 2100 kg Material: stainless steel Base construction: standing frame Features: insulation, tank fittings

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with two frame cooling zones and cone cooling. Most recently used as a beer fermentation tank with a usable volume of 150 hl. Additional title: vertical, coolable, insulated stainless steel pressure tanks Gross volume: 19040 l Pressure capacity: 2 bar Max. operating temperature: 40 °C Cooling area: 8,4 m2 Length: 2,53 m Width: 2,53 m Height: 6,54 m Weight: 2300 kg Material: stainless steel Hnsljvu Tvishcdw Ejp Position: standing frame Features: insulation, tank fittings

Condition: used, Year of construction: 2001, PET filling line from KHS Additional title: with palletising and depalletising Performance at 1 liter: 24000 bottles/h Hnelhcdsvu Tufow Esp Formats: 0,5 L and 1 L bottles Features: Depalletizer, Air transport, Rinser, Filler incl. height control, Mixer, Packing, Crate washer, Palletizer

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Running direction: anticlockwise Holhcdevu Tt Isw Esnp Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Additional title: Returnable glass bottle filling line Capacity: 30000 bottles/h Hnjlhcjvu Tthsdw Eop Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Condition: used, Year of construction: 2005, Shrink-tunnel Additional title: with 2 parallel belts (incl. sleeve fit control) Air volume: 700 m³/h Engine speed: 900 rpm Power: 0,25 kW Length: 3 m Hjlhcdwevcq E Ds Eonp Width: 1,25 m Height: 2,1 m Weight: 500 kg Operation / Control: with control panel for each conveyor Features: Two parallel conveyors going through the unit coming from 2 sleevers, optical sleeve fit control with conveyor stop

Year of construction: 2019, Condition: used, Capacity approx.: 31000 l Operating pressure: 3 bar Operating temperature: 50 °C Length: ca. 2800 mm Width: ca. 2800 mm Height: ca. 8000 mm Weight: 4500 kg Material: stainless steel Position: vertical Hjlhcdwjvcq Ews Eonp Base construction: 4 x height-adjustable feet Features: Cooling: cone and side wall; insulation; hydrostatic pressure sensor Deltapilot M (E+H); sampling valve; 3 x PT 100, swivel cone

Condition: used, Year of construction: 1987, Capacity: 10000 liter Working pressure: 22 bar Max. temperature: -50 °C Length: 5,0 m Width: 1,8 m Hnolovcq Eqjhcdw Eop Height: 1,8 m

Condition: used, Year of construction: 2013, Additional title: high pressure homogenizing Holhcdwsvcq Eds Esnp Capacity range: 600 l/h Pressure: 250 bar Cellular particle size: 1 μm cellular particle Length: ca. 2,2 m Width: ca. 2,5 m Height: ca. 1,9 m Operation / Control: Integrated in a ProLeit process control, the motor was controlled by an external frequency converter. Features: CIP-able, SIP-able

Condition: used, Year of construction: 1993, 5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities. Additional title: 7 pcs. of vertical, coolable stainless steel tanks Volume fermentation- and storage tanks: 10474 l per piece Volume wheat beer tank: 8071 l Volume flotation tank: 12242 l Material: stainless steel 1.4301 Position: standing on feet Helhcdwsvcq D Tj Eenp Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

Condition: used, Year of construction: 1990, Additional title: beer filtration Filter capacity: 100 hl/h Filter area: 20 m² Perm. operating pressure: 6 bar Perm. operating temperature: 100 °C Voltage: 380 V Frequency: 50 Hz Helhcdwovcq D He Eenp Weight: 2020 kg Features: 32 filter elements (30 x main filtration, 2 x residual filtration), 14 clamp screws (type: M20-L-8)

Condition: used, Year of construction: 1993, Capacity: 12242 l Length: 2300 mm Width: 2300 mm Hnelhcdwevcq Dyo Ejp Height: 3550 mm Material: stainless steel 1.4301 Position: standing on feet Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout.