Med Tub Machines & Tools Srl

Condition: ready for operation (used), Romanian Lathe SN 1800x3000 Manufacturer Uppetrom 1 MAY Chuck diameter 1800 mm Gbelsv Uaufehcdw Ijl Max swing over bed 1800 mm Length between centers 3000 mm Max swing over slide 1450 mm Max weight of work piece between centers 25,000 kg Movie with machine underpower available

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm max. length between centers: 3000 mm max. grinding length: 2950 mm min./max. diameter of the grinding wheel: 40 / 250 mm main drive power: 8.5 kW With accessories. Gelhcdwov Sm Nqo Iobl Movie with machine underpower available

Condition: ready for operation (used), We can offer Sakamura cold nut formers models: NP 430, NP 440, NP 450, NP 460, NP 480 Gjljv H Ap Ashcdw Iobl Diameter of bars from 4mm -33 mm All machines underpowered

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Gbjlhev Hx R Nscdw Ijl Length 3500 mm weight approx. 22 tons

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Gbjlhcsvbcxtodw Iel Main motor 41kw Movie available

Condition: ready for operation (used), Gear hobbing machine model 5A342 Manufacturer: KOLOMNA (Russia) Year of manufacture: 1970 Main technical data: Max gear diameter: 2000 mm Max module: 25 Table diameter: 1800 mm Maximum table load: 10 t Main motor power: 14 kW Overall dimensions(LxWxH): 6910 x 2990 x 3462 mm Gslhcdwsu Avt Do Isbl Weight of the machine: 31800 kg Accesories: Set of change gears ; Aditional hobbing head tooth by tooth Arbors Some supports

Condition: ready for operation (used), Jig grinding machine HAUSER 5 SM Table length: 750 mm Table width: 620 mm Longitudinal travel (X-axis): 700 mm Transversal travel (Y-axis): 500 mm Vertical travel (Z-axis): 150 mm 2 columns execution Travel of the vertical slide: 500 mm Passage from grinding motor to table: 500 mm Max grinding diameter with display-plate: 300 mm Passage between the columns: 840 mm Max angle with taper grinding: up to 16 degrees Vertical travel of grinding spindle, stepless: -From 3 mm -Up to 145 mm Travel speeds, stepless: up to 2.8 m/min Radial fine feed of U-axis: up to 4.5 mm Planetary motion speeds of C-axis, stepless: -From 10 rpm Gbolhcdjuyuunow Iol -Up to 280 rpm Total power required: 6.3 kW Aprox weigth 5.000 kg Jig grinding machine HAUSER 3 SMO Table length: 595 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm 1 column execution Travel of the vertical slide: 500 mm Passage from grinding motor to table: 490 mm Distance from spindle-center to vertical slide: 310 mm Max. grinding diameter: 220 mm -With display-plate: 280 mm Max. angle with taper grinding: -Up to: 12° Vertical travel of grinding spindle (stepless): -From: 1 mm -Up to: 110 mm Travel speeds (stepless): -Up to: 6 m/min Planetary motion speeds (stepless): c axis -Up to: 330 rpm Spindle motor: 7.50 kw weight: about 2000 kg

Condition: ready for operation (used), Year of construction: 1984, SIP producer Model HYDROPTIC 6A Year of production 1984 The size of the work table is 1100 x 842 mm Max. item weight on a 1000 kg table Number, width and distance of T-slots table 8, 16, 105 mm Cross-travel of the table (X) 1000 mm Longitudinal table travel (Y) 795 mm Gbslhcsuxmlvjdw Ijl Vertical table travel (Z) 800 mm Max. spindle distance to the table 1020 mm Clearance between 1100 mm columns Spindle motor power 6 kW 400 V powered Weight 11300 kg

Condition: ready for operation (used), Rack shaping machine EZ-9V Processing length: 1200 mm Max. module: 12 mm Gelhjuw Tvfscdw Iobl Max. rack width: 200 mm Length of cut rack: 1100 mm Width of cut rack: 170 mm Cut module: 12 Weight: 10200 kg Rack shaping machine is intended for cutting of teeth of gear racks by using a method of work-piece running with a gear cutter. Rack shaping machine allows to make spur and helical gear racks of up to 1200 mm long and 12 mm maximum modul

Condition: ready for operation (used), Slideway grinding machine SFBZ 1800x4000 Length of grinding max, mm 4000 Width of grinding max, mm 1800 Dstance between column mm 2200 Height of grinding max, mm 1250 Gbelhcdwjuug A Es Isl Table size, mm 4000 x 1800 Grinder wheel size max, mm 630 x 100 x 305 Weight of workpiece max, kg 15000 Weight of machine, kg 56.000

Condition: ready for operation (used), Year of construction: 1987, VTL SC 3300 UMARO Faceplate diameter - 3000mm Max.turning diameter - 3300mm Max. working height - 2300mm Max.turning diameter with a side tool post - 3300mm Max. work piece weight - 18000kg Table speed range 1.02-92 RPM, Gbelhsum E Iwocdw Ijl Working feed range 0.05-5 mm/rev., Main motor power 55 kW, Overall dimensions: 5600 x 5300 x 5400 mm, Aprox Weight 47350 kg

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Generator -2 machines Max gear diameter 800 mm Max module 16 Max gear ring width 125 mm Number of theet 5-150 Gbsleum Ez Rjhcdw Ijl Spindle speeds range 20-125 rpm Main motor power 7,5 kW Overall dimensions LxWxWxH 3170x2180x2200 mm Weight 15 t

Condition: ready for operation (used), Year of construction: 1983, Sheet metal levelling machine UBR 20x3150/7-15 Manufacturer: VEB Ernst Talmann Made in: Germany Max sheet width: 3200 mm Gbslhcdsum Ezdsw Isl Max sheet thickness: 24 mm Min sheet thickness: 6 mm Number of straightening rolls: -Top: 4 -Lower:5 -Total: 9 Number of driving rolls: 9 Total power requirement: 67 kW Total weight: 52.390 kg Machinery is in working condition

Condition: ready for operation (used), Year of construction: 1992, VTL SC 17 CNC Siemens 802D Chuck diameter - 1.450 mm Max turning -1.650 mm Job heigth -1.200 mm Table speed -2 -200 rpm Working feed range - 0,1-400 mm/min Rapid traverse - 4000 mm/min Main motor - 55 kw Weigth -aprox 21 to Gelheugl I Nscdw Iobl Movie with machine underpower available!

Condition: ready for operation (used), Gear Grinding Machine STANKO 5A851 Module 2-10 Gear diameter 35- 320 mm Number of teeth 10- 120 Gear width 220 mm Maximum angle of the ground teeth 45 degrees Gbelhcdeuc T Ivew Iol Spindle speed 2650 rpm Distance between centers 300-360 mm Dimensions 3170x1820x1820x202020mm Machine weight aprox 7 to

Condition: ready for operation (used), Straight bevel gear generator SARATOV 5C276P Max Module 10 Max. gear wheel diameter 500 mm Max. gear wheels cone distance 250 mm Max. gear ring width 80 mm Gslhcdsuc T Hxjw Iebl Min. angle of dividing cone (pitch), degrees 5 Number of wheel teeth: 10 - 150 Distance between spindle and machine center, mm - max. (stock angle 5 degrees) 375 mm; - min. (stock angle 90 degree) 75 mm Stroke 100 mm Slider double stroke 48 - 400 spm Motor capacity 4 KW Machine dimensions 2885 x 2570 x 1995 mm Machine weight 8750 kg

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Gbelhstz S Hcscdw Iel Stroke 500mm, 320mm and 200mm

Condition: ready for operation (used), VTL MORANDO KL 12 CNC Fagor 8040 Faceplate diameter: 1200 mm Swing diameter: 1400 mm Turning height: 1080 mm Gbjlhcjtvv Sqjdw Isl Main motor: 40 kW Total power requirement: 50 kW Weight of the machine ca.: 18 t Movie underpower available

Condition: ready for operation (used), Year of construction: 1984, Romanian Hot Former AMP 20 line Press Capacity : 220 tons, Forming section : 3, Gbjlhcdjtaui Ujw Isl Forming load: 90 ToF, Bar Diameter: 14 to 25 mm, Part Outer Diameter, Max.: 35 mm, Cut-Off Length: 15 to 40 mm, Ram Stroke: 110 mm, Ejector Stroke: 55 mm, Die Center Distance: 110 mm, Production Per Minute: 12 to 180 , Weight: 11 tons, Technical documentation: yes Movie underpower available

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Golhcdjr Elpvsw Iobl Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Floor space 1240x2310 mm Height 1422 mm Machine weight 4083 kg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: ready for operation (used), Year of construction: 1984, VTL Titan SC 2000 Chuck diameter 2000 mm Max. turning diameter 2150 mm Max. work piece height 1600 mm Max. work piece weight 15000 kg Main motor power 55 kw Movie with machine underpower available Gelhcdwjruncde Iebl Weigth of machines aprox 31.5 to

Condition: ready for operation (used), Spare parts for Dnepropress PA 1345 Gelhjrcbmbecdw Iebl Bolts, nuts, cylinders

Condition: ready for operation (used), Year of construction: 1983, SEDIN VTL 1525 Table diameter : 2250 mm - Maximum swing : 2500 mm - Working height : 1600 mm Gelhcdwjrblfxj Isbl - Table speeds : 1,6 - 80 rpm - Main motor power : 45 kW - Weight of part on table (maximum) : 16 To - Weight of the machine : 35,5 T -Movie available

Condition: ready for operation (used), Year of construction: 1987, VTL SC 17 Chuck diameter 1450 mm max turning 1700 mm Job heigth 1200 mm Table rpm 2,22 -200 rpm Main motor 55kw Gbjleq Ixdfohcdw Isl Weigth -21 to

Condition: ready for operation (used), Gear shaper STANKO 5M150 Max diameter of gears cut 800 mm Max module 12 mm Gbelhcdwsqcvkvo Iel Max cutter stroke 200 mm Saddle indexing gear diameter: 360 mm Axes distance (tool and table) 0-700 mm Largest tool diameter 200 mm Cutter arbor diameter 44.443 mm Taper M5 Table diameter 800 mm Distance from floor to table 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double s.p.m. 33-188 mm Range of table feed rates per cutter double stroke: -Circular 0.2-1.5 mm -Radial 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimension: 3100x1800x3500 mm Weight: 10200 kg