Used Gear Hobbing Machine for sale (70,316)

Condition: used, functionality: fully functional, LIEBHERR Gear Hobbing Machine - Max. Module 20 / Max. Diameter 1800mm The machine is in good operational condition and is complete with comprehensive peripheral equipment. It is sold including change gears (dişli takımları), hob arbors/mandrels (malafalar), and original technical manuals/documentation (kitaplar). • Available for immediate inspection under power. • Transport and dismantling can be arranged upon request. Technical Specifications • Manufacturer: LIEBHERR • Type of Machine: Vertical Gear Hobbing Machine • Max. Machinable Module: 20 mm • Max. Workpiece Diameter (with Counter Support/Steady Column): 1250 mm Gbjdpez Ipadsfx Akyou • Max. Workpiece Diameter (without Counter Support): 1800 mm • Workpiece Table Bore Diameter: 300 mm • Workpiece Bore Taper Diameter: 60 mm • Workpiece Table Taper: Morse Taper 10 (MK 10) • Max. Cutter (Hob) Diameter: • Standard Hobbing Head: 250 mm • Universal Hobbing Head (Type 2529): 300 mm • Tangential Hobbing Head (Slot Φ): 300 mm • Max. Cutter (Hob) Length: 340 mm • Hob Arbor Diameter Options (60-70-80): • Included Machine Accessory: 40 mm • On Request / Optional: 32 mm, 50 mm, 60 mm etc. • Cutter Spindle Taper: Morse Taper 10 (MK 10) • Center Distance between Cutter and Workpiece Axes: • Standard Hobbing Head: Min. 245 mm / Max. 1260 mm • Tangential Hobbing Head: Min. 185 mm / Max. 1200 mm • Universal Hobbing Head (Type 2529): Min. 160 mm / Max. 1175 mm • Machine Dimensions (LxWxH): 6500 x 3900 x 3300 mm

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Max. diameter with counter support: 1450 mm Max. diameter without counter support: 2100 mm Diameter of the clamping table: 1800 mm Gbjdpoz Df A Tsfx Akyju Total weight: 38 tons The clamping table has been disassembled and overhauled.

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 min. module 1 Gsdpfx Akszr Rpdoysbu total power requirement 45 kW weight of the machine ca. 22 t dimensions of the machine ca. 5x3x4 m

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. Godpfjz Etmpex Akyebu The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. Gedjz Et E Ejpfx Akysbu The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, Year of construction: 1970, max. wheel diameter 1600 mm gear width 660 mm max. module 16/18 Gjdpsz Rqnvsfx Akyobu number of milling spindle turning speeds 18 number of feeds 18 total power requirement 12 kW weight of the machine ca. 20 t

Condition: used, Year of construction: 1983, max. wheel diameter 80 / 124 mm gear width 150 mm max. module 2 min. module 0,3 turning speeds 210 - 1680 U/min min. number of teeth 6 total power requirement 2,2 kW Godpfez Dk Afjx Akyobu weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 1,5 x 1,8 m Top condition.

Condition: used, Year of construction: 1989, max. wheel diameter 120 mm gear width 400 mm max. module 10 min. module 1 total power requirement 40 kW Gbodpfoz Drcaox Akyeu weight of the machine ca. 7 t dimensions of the machine ca. 3,840 x 5,025 x 2,490 m

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (40°), total length: 6,100 mm, gear diameter: 180 mm, total height: 3,450 mm, total width: 2,975 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 4,000 rpm, spindle speed (min.): 300 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 8,400 kg, tool diameter: 80 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A high-performance machine for series production: the horizontal Gleason-Pfauter P 210 L, built in 2003, mills shafts, pinion shafts, and small gears up to module 4 and 180 mm in diameter at speeds of up to 4,000 rpm on the cutter and 1,000 rpm on the workpiece – designed for short cycle times and dry machining. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems with full spare parts and support availability. Modern Gleason-Pfauter kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, and we will inspect it together with you in Chemnitz. The horizontal design makes the P 210 L ideal for shaft machining: workpieces up to 830 mm are clamped between the spindle and tailstock, with 300 mm of axial travel and 100 mm of radial travel (center distance 30–130 mm). The milling head pivots by ±40°, and the tangential travel of 160 mm utilizes the full cutter length of 170 mm for long tool life. The high workpiece speed allows for multi-tooth hobbing cutters and thus the cutting performance required in the gearbox and automotive component supply sector. The machine is prepared for connection to a loading portal or a robot. Technical data: max. workpiece diameter 180 mm, max. module 4, working area radial 100 mm (30–130 mm), axial 300 mm (260–560 mm), tailstock 350 mm (480–830 mm), max. cutter diameter 180 mm, max. cutter length 170 mm, tangential travel 160 mm, cutter speed 300–4,000 rpm, max. workpiece speed 1,000 rpm, swivel angle ±40°, total connection value 50 kVA. Installation dimensions approx. 6.1 × 3.0 × 3.5 m, weight approx. 8.4 t. The machine will be delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in an air-conditioned control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometry acceptance is carried out according to the manufacturer's standard or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual. Gbjdpfx Asz Et Rzjkyou

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm Gbedpjv U Un Hjfx Akyju workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: used, Technical details: Gbodpfx Akjv U T Dyoysu center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: good (used), Year of construction: 1976, max. wheel diameter 1250 mm gear width 1000 mm max. module 16 shifting 250 mm milling spindle speeds (infinitely variable) 32 - 200 U/min min. number of teeth 12 table hole 255 mm total power requirement 32 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,2 x 3,7 m Top condition! 2 cut cycle, change gears, arbors, chip conveyor. Following hob arbors are with the machine: Gbodpfx Aszr Rpkokysu Diameter: 32 , 40 , 50 , 60 mm

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 1,200 mm, position of the milling head: Schwenkbar (45°), table diameter: 1,200 mm, total length: 5,250 mm, gear diameter: 1,250 mm, total height: 4,420 mm, total width: 4,700 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 160 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,000 mm, overall weight: 22,000 kg, distance table to spindle center: 780 mm, tool diameter: 260 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A ZFWZ 10 module for large gears up to 1250 mm in diameter and module 22, which was completely overhauled in 2009 by SerWeMa and converted to a Siemens Sinumerik ONE with six CNC axes. The machine is in operational condition in our hall in Chemnitz: you can inspect it while it is running, we can mill your own sample part on request, and you can pick it up from us. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul, owns the module drawing archive, and knows the machine inside and out. The ZFWZ 10 is the classic Chemnitz gear hobbing machine for gearbox construction, crane and conveyor technology, mining, and heavy machinery construction: heavy cast iron bed, 1200 mm table, milling head with ±45° swivel range. It mills spur and helical gears up to module 16 in hobbing and up to module 22 in single indexing. With 1000 mm of axial travel between the cutter axis and the table surface, long shafts and large workpieces can be securely clamped. The Sinumerik ONE controls all six axes with an electronic gear train; the SerWeMa gear software guides you through workpiece and tool data via masks, without requiring programming. Technical data: max. workpiece diameter 800/1250 mm, table diameter 1200 mm, distance between cutter axis and table axis 80–780 mm, distance between cutter axis and table surface 350–1350 mm, max. module 16/22, max. cutter diameter 260 mm, max. cutter length 350 mm, tangential travel 250 mm, cutter speed 20–160 rpm, swivel angle ±45°. Installation dimensions approx. 5.25 × 4.7 × 4.42 m, weight approx. 22 t. Equipment: Siemens Sinumerik ONE control with six CNC axes, machine enclosure, magnetic chip conveyor, central and loss lubrication, hydraulic unit, coolant system, operating manual. We offer the conversion to Siemens Sinumerik ONE with Sinamics S120 and a new control cabinet, either before delivery or later at your plant – then with a guarantee on the new electrical equipment. Also optional: sample part milling in our plant, geometry acceptance according to DIN, installation and commissioning at your site, operator training. Spare parts and service are provided from a single source, worldwide, even after the purchase. Gedpfsz E Hy Aex Akysbu

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters Gedpszv Ed Dsfx Akyobu -1 pallet / Clamping arbors DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (55°), table diameter: 170 mm, total length: 3,200 mm, gear diameter: 250 mm, total height: 3,000 mm, total width: 2,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 600 rpm, spindle speed (min.): 75 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 700 mm, overall weight: 12,000 kg, distance table to spindle center: 230 mm, tool diameter: 175 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The WF 250 is the classic machine for gear cutting in the gearbox, drive, and supplier sectors: compact, rigid, and quickly retoolable. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems, ensuring full availability of spare parts and support. Proven Hurth module kinematics, new electrical systems, new drives, new safety technology: you get the performance of a new machine at a fraction of the price – inspected in Chemnitz, together with you. The machine mills spur and helical gears, as well as shafts, up to a module of 6 and a workpiece diameter of 250 mm. With an extended stand and counter-stand, long shafts and pinion shafts with a distance of up to 900 mm between the cutter axis and the table surface can be securely clamped. The milling head pivots by ±55°, the cutter speed ranges from 75 to 600 rpm, and the tangential travel of 240 mm utilizes the full cutter length for long service life. Technical data: max. workpiece diameter 250 mm, table diameter 170 mm, distance between cutter axis and table axis 40–230 mm, distance between cutter axis and table surface 200–900 mm, max. module 6, max. cutter diameter 175 mm, max. cutter length 300 mm, tangential travel 240 mm, cutter speed 75–600 rpm, swivel angle ±55°, total connection value 40 kVA. Installation dimensions approx. 3.2 × 2.6 × 3.0 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet of our own manufacture. The user-friendly interface enables easy setup and programming without in-depth G-code knowledge. Geometry acceptance is carried out according to manufacturer standards or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, an extended stand and counter-stand, a new paint job in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual. Gbodpez Et A Rjfx Akyju

Condition: good (used), functionality: fully functional, Tos OFP-32, Serial No. 0427441 Gbjdpfx Akszxqdzjyou Condition: 8/10 Max. module: 7 / 9 Max. diameter: 320 mm Max. length: 200 mm Vertical gear hobbing machine

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Gjdpfxoz E Hx So Akysbu Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request.

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Minimum diameter: 200 mm Gbsdpeylprfjfx Akyju Maximum number of teeth: 45 Max. module: 20 Weight: 40 tons

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Gbodpfxow Al U Ee Akysu For more information, please contact us.

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Gbedpfjwkih Esx Akyeu

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Godpfx Akow Hquxsysbu Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, position of the milling head: Schwenkbar (50°), table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, rotational speed (max.): 360 rpm, rotational speed (min.): 18 rpm, distance table to spindle center: 500 mm, tool diameter: 215 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Godpez Et N Refx Akysbu Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. Gjdpfxswzypne Akyobu The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 12,000 kg, ECHNICAL DESCRIPTION: Max. Module 5/6 Max Diam. Ext. Nominal 300mm Maximum axial hob slide travel(Z) 360mm Maximum hob head swivel angle ± 35 deg Max. Hob Length 180mm Max. Hob Diam 150mm Max. Hob Shift 200mm Max. Hob speed 1000rpm Max. table rotation 500rpm EQUIPMENT: - Sinumerik One - Dialog Program - Table with Direct Drive – Chip conveyor – Lubrication and hydraulic unit – Full coverage of the workspace Gbodpfxoz Drbpe Akyou – Documentation

Condition: ready for operation (used), Horizontal gear hobbing machine with master hob, Precimo model HR 3-ND-15. Maximum workpiece diameter: 250 mm. Maximum module: 7. Maximum diameter for module 7: 135 mm. Maximum diameter 250 mm for module 5. Maximum hobbing length: 335 mm. Minimum number of teeth to cut: z6. Maximum distance between centers: 735 mm. Maximum hob speed: 435 rpm. Estimated weight: 3500 kg. Gbjdey Swl Uepfx Akysu