Condition: ready for operation (used), The Klingelnberg KNC 60 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the process of milling spiral-toothed bevel gear sets. Cgob Hevyd Ndjclgnet Technical data Klingelnberg KNC 60 CNC Wheel diameter - max 650 mm Largest tooth width 120 mm Module 2.2-12 mm Number of teeth 5-120 Hypoid offset +/- 100 mm Usable cutter head radii 55, 100, 135, 170, 210 mm Machine weight Approx. 16,000 kg Dimensions (L x W x H) 5750 x 2800 x 2700 mm *Image shows the machine in its current condition as a used machine and can be offered on request, partially modernized, or as a retrofit completely modernized with a new CNC control (SIEMENS ONE).

Condition: new, Year of construction: 2013, Functionality: fully functional, Höfler dressing unit for Rapid II 650 - 1250mm with two TS 100cx140-60007 dressing spindles, Heidenhain Y2-axis scale and two Siemens motors. More detailed information can be found in the pictures. Ceb Hsrf Uqpjclgnegt The dressing unit is new. Assembly and commissioning is possible on request.

Condition: good (used), Year of construction: 1982, Functionality: fully functional, machine/vehicle number: 73138, total length: 8,000 mm, type of input current: three-phase, overall weight: 15,800 kg, turning diameter over cross slide: 320 mm, swing diameter over bed slide: 600 mm, turning diameter over top slide: 350 mm, Largest workpiece diameter above bed mm 600 cross slide (largest workable diameter) mm 320 (350) can be supported on a movable fixed support clamping in the clamping cartridge, max. mm 15-80,80-160, 160-250,250-320 mm 120 Largest milling lengths mm 1000,2000 to 8000. in 1 m steps clamping spindlespindle diameter in front bearing mm 160 clamping spindle passage mm 12O Csb Hcjurt Sbolgnjgt three-jaw chuck, diameter mm 250,350 pitch range (accessible via gear change) for long tooth milling mm 2-48,48-100,larger range possible for short tooth milling mm 0.5-3 teeth (accessible via gear change). AB 4 numbers starting from 4 for gear milling feed intervals feeding of the bed carriage number 27 feeding in the longitudinal direction mm/min 0.4-1600 feeding rates in hobbing mm/U 0.1-G fast transitions transmission independent mm/min 4000 transmission dependent mm/min 160/1600

Year of construction: 1999, Condition: ready for operation (used), Module size: 5mm, max. workpiece diameter: 180mm, axial travel: 400mm, shank travel: 200mm, milling cutter diameter: 150mm, tool speed: 2250rpm, table speed: 250rpm, max. tool clamping length for bore milling cutter/end milling cutter: 236mm/360mm, control: Liebherr PC-NC. Documentation available. On-site inspection is possible. Cgobevpviuo Hclgnst

Condition: good (used), Year of construction: 2012, max. wheel diameter 550 mm gear width 300 mm max. module 8 min. module 0,3 control Sinumerik 840 D number of teeth 5 - 999 pressure angle 14 - 30 ° helix angle -45 / +45 ° workpiece weight max. 300 kg x-axis 490 mm rapid traverse X-axis 15 m/min y-axis 220 mm rapid traverse Y-axis 5 m/min z-axis 300 mm rapid traverse Z-axis 5 m/min Cob Hclgevrkzkjnjgt grinding wheel diameter 205 - 300 mm grinding wheel width max. 125 mm boring diameter 160 H7 mm number of starts 1 - 5 weight 12,5 t Machine is equipped with - König loader year 2018 for workpiece weights up to 30 kg - Hoffmann coolant system built in 2019 Extension to max. 550 mm diameter

Condition: repair required (used), Year of construction: 1989, Functionality: unexamined, Yağ kaçağı mevcut. Çalışmıyor. Cgjb Hsvb Uh Hjclgnjt

Condition: refurbished (used), The gear hobbing machine Wanderer GF 406 was designed as a universal machine for the flexible machining of gears and is used for hobbing gears, threads, extruder screws and rotors The illustration shows the machine in its current condition as a used machine/retrofit. Performance description: Wheel diameter: 700 mm Module - max.: 12 Tooth width: 5800 mm Space requirement approx.: 12.6 X 5.6 X 2.5 mm Machine weight approx.: 30,000 kg Cgsb Hclgeuygkujnot Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to prior sale

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, total length: 3,950 mm, total height: 3,000 mm, total width: 2,760 mm, overall weight: 10,500 kg, Maximum Pich: Modul 12 Maximum Diameter: 700mm Axial Travel (Z axis): 500mm Maximum tangencial/shift travel: 200mm Hob Speed: 380rpm Maximum Hob Diameter: 192mm Cgob Hcleugm A Ijgnst Maximum Hob Length: 250mm Standard Hob Arbor: 40mm Table Diameter: 590mm Hob Arbor Taper: MK5 Hob Head Angular Inclination: 37degrees Maximum Table Load: 1800kg Supply Voltage: 380V Integrated with SIEMENS SINUMERIK CONTROLLER 828DSL

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. Ceb Hevn Unyoclgnsgt

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,30x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees + 30 / -30 Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees 0.001 Cgjb Hovnmn Ssclgnst Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm 0.001 tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/230 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 3000 Workpiece drive C2 27.0 3000 X-axis 20.0 3000 Z-axis 20.0 3000 U-axis 6.0 3000 Vertical portal (V1 axis) 6.0 3000 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 3000 Loading slide (X1 axis) 5.0 3000 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 2700 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: used, Year of construction: 1990, machine/vehicle number: 1112-2, Bearing no. 24090 Technical data: - Drilling capacity into solid steel ST 60 40 mm - Drilling capacity GG 25 50 mm - Thread cutting ST 60 M 33 - Thread cutting GG 25 M 45 - Drill spindle holder MK - Spindle diameter 55 mm - Quill stroke 200 mm - 18 Drill spindle speeds 35 - 1800 rpm - Drilling feed rates 0.075 - 0.60 mm/rev - Height adjustment of the drilling column 450 mm - Drilling radius min / max 305 / 1005 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1900 x H 2800 x D 2300 mm - Weight approx. 1800 kg Cebsr Hchue Hclgnsgt - with: - automatic selection of speeds + feeds - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: like new (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 61373, IT IS IN WORKING CONDITION Csbjvwlf Io Hclgnegt

Condition: good (used), The Klingelnberg BF 203 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used for milling straight-toothed bevel gears. Image shows the machine in its current condition as a used machine. Performance description: Wheel diameter: 240 mm Module - max.: 10 Tooth width: 60 mm Cebjlxzmis Hclgnsgt Space requirement approx.: 2.3 x 2 x 1.7 mm Machine weight approx.: 6,700 kg Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to advance sales

Condition: used, tooth flank grinding machine REISHAUER NZA Cgeb Hclgovv Sg Ajnst

Condition: good (used), GLEASON 500HL Cgebovgbags Hclgnjt HYPOID LAPPING MACHINE

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] Ceb Hcjuhbqvelgnogt - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D - Cooling tank - Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, table load: 1,700 kg, helix angle: 45 °, working width: 200 mm, machining diameter: 250 mm, spindle stroke: 180 mm, TECHNICAL DETAILS Axes: X / Z / A / B / V / C / C1 / Z1 / Y1 / Y2 / Z3 Hobbing cutter diameter: max. 90 mm Table diameter: 145 mm Module: max. 3 mm Number of teeth: min. 4 Csb Hevvtxgsclgnegt Milling head swivel angle: ± 45 ° Resolution accuracy: 0.1 ° Workpiece table load: 17 kN Milling cutter speed: 450 - 4,500 rpm Milling diameter of spur gears/helical gears: 125 Milling width of spur gears/helical gears: 250 mm (axial) Spindle stroke: 180 mm Milling cutter width: max. 200 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Rated current: 55 A Fuse in the supply line: 63 A

Condition: good (used), Year of construction: 1977, Functionality: fully functional, machine/vehicle number: 150-5036, Used in working condition Cjb Hcjvvrh Hslgnjgt

Condition: good (used), Year of construction: 2014, Rausch Entgratomat 500, Year of manufacture 2014, Control Siemens Simatic HMI Removal of coarse burrs Fine deburring Modules (m) from 2-8 Chamfer geometry 0.1 x m mm Straight, slanted or spiral toothing Workpiece diameter max. 500 mm Workpiece weight max. 50 kg Milling spindle 18,000 to max. 50,000 rpm Collet 6 mm Kuka robot including PLC S7 and HMI Mobile Panel KTP 900 Deburring of test components possible. Comprehensive range of milling cutters. Cgob Hcsvvk Dtslgnst

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m Cjb Hjrpcbbeclgnogt A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor *

Condition: good (used), GLEASON PHOENIX 200G CNC HYPOID GRINDER Cgebovav T Ij Hclgnot

Condition: good (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 26182, used it is in working condition Csbsvu Tdaj Hclgnegt

Condition: excellent (used), gleason no.601 g-plate gear cutting machine Cgob Hcovavwmslgnet

Condition: good (used), BEVEL GEAR GRINDING MACHINE Cjbsufv U Rj Hclgnjgt KLINGELNBERG WNC-30

Condition: good (used), KLINGELNBERG AMKU 630 Cgob Heufv U Declgnjt