Used Cell Wheel for sale (20,359)

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Rotary valve: 6 blades -Drive motor: Leroy Somer 1.1 kW -Gearbox: Leroy Somer i = 1:30 -Speed: 1420/47 rpm -Inlet opening: 245 x 230 mm -Outlet: Ø 90/55 mm -Transport dimensions: 850/670 / H560 mm -Weight: 132 kg Kodohfufnspfx Agzjln

Year of construction: 2020, condition: good (used), Rotary valve, Comav dosing valve, rotary airlock, drop-through valve Rotor diameter 400 mm Dimensions: see photos Kledpfx Agowyf Nwszen Manufacturer: Comav Type: VSD 400 Year of manufacture: 2020 Completely stainless steel Venturi diameter: 100 mm Motor power: 0.75 kW See our other listings.

Year of construction: 2000, condition: used, machine/vehicle number: 109920, Please state your offer price. Klodpfx Asycvwijgzon Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: new, functionality: fully functional, empty load weight: 4 kg, in original packaging, without any warranty whatsoever Kledpfxoyftbwe Agzjn

Condition: used, Year of construction: 1960, centre distance 1200 mm 550 Kjdex U A Igjpfx Agzjln weight of the machine ca. 2,5 t

Condition: used, Year of construction: 1965, multifix ja centre distance 1500 mm Kledpfx Aexylq Eegzen documentation ja weight of the machine ca. 3 t

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Kjdpfx Agod Nw Ttjzjln Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Kodpfxewck N Ie Agzjln Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. Ksdpfeq Nf S Rox Agzjln 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: used, Ex-Cell-O XG620 Excello XG 620 Klodpfx Agsurt Tlszjn Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Klsdpfjt Hw D Dox Agzon Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Klsdpfxjw Eilye Agzsn Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: used, functionality: unexamined, spindle bore: 81 mm, turning diameter over bed slide: 650 mm, center height: 320 mm, turning length: 1,500 mm, Used lathe, see pictures. With Sony digital readout and 660mm faceplate. Year of manufacture: 1976. All technical specifications in the last picture. NOTE: The type plate states XD500, but it is actually an XD630, according to the dimensions and delivery note. Kjdewm Rviopfx Agzeln Center distance: 1500 Trajectory length: 2500 Center height: 320mm With taper turning direction, side guide

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 8,450 h, For sale: Yale forklift with a lifting capacity of 5 tons. Year of manufacture 2007, in very good condition, equipped with all options (side shift, fork positioner, etc.). Klodpoyl Sfbjfx Agzen

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 7,500 h, load capacity: 1,600 kg, lifting height: 5,220 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,240 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 18x7-8 Rear tires type: Superelastic Klodpfx Aeyl Dd Aegzjn Rear tires size: 18x7-8 Battery voltage: 24V Battery capacity: 1000Ah Battery manufacturer: SBS Battery type: PzS Battery year: 2014 Description: In addition to this unit, we also offer other forklifts and warehouse equipment. Our machines have been workshop inspected and certified in accordance with FEM4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used vehicles, even if you do not purchase another one from us. Leasing and financing at attractive rates are available on request. We are happy to provide you with professional and comprehensive advice about our vehicles. Side shifter, 3rd valve, rear work light, front work light, windscreen, full free lift, interior mirror, wiper, single-pedal control, LED, 3-wheel, seat,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,377 h, load capacity: 4,500 kg, lifting height: 5,980 mm, free lift: 1,925 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 – 4,999 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished, without warranty Klsdeyl Dbzjpfx Agzsn Technical condition: Very good Front tire type: Superelastic Front tire condition: 60 – 80% Rear tire type: Superelastic Rear tire condition: 80 – 100% Battery voltage: 80V Battery year: 2020 Description: Price includes new safety inspection (UVV) and new paintwork. The 2020 battery will be regenerated using a power cycler including a Kappa test. Matching charger with plug included. Affordable transportation can be arranged. Lease purchase possible! Features: Sideshift, fork positioner, third valve, fourth valve, rear work light, front work light, heater, full cabin, full free lift, CE certificate, multi-lever control.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,702 h, load capacity: 2,500 kg, lifting height: 4,400 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, fork length: 1,800 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Like new Technical condition: Very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery year: 2016 Kedpfx Aex Axarogzsln Description: Price includes new safety inspection (UVV), paintwork is very good / only minor paint imperfections on the counterweight (new paint available at an additional cost of EUR 1,000 net), 2016 battery reconditioned with power cycler including Kappa test at 57% (alternatively, new battery available at additional cost of EUR 4,000 net), suitable charger with plug, scale, container version. Affordable transport options can be organized on request. Leasing/purchase available! Features: Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windscreen, load backrest, full free lift, CE certificate, scale, safety light.

Condition: used, Electric Forklift Truck JUNGHEINRICH type EFG 216 Serial no.: FN413671 Year of manufacture: 2011 Load capacity: 1600 kg Lifting height: 4800 mm Fork length: 1220 mm Fork carriage width: 980 mm Overall height: 2120 mm Operating voltage: 48 volts - Triplex mast with full free lift 1550 mm - Hydraulic side shift - 2 driving speeds - Battery from 2015, type 06 EPZS C750 SC (48 volts, 750 Ah) - Automatic charger, 48 volts - 3-wheel solid rubber tyres, front 18 x 7-8, rear 140/55-9 - According to hour meter: 14,725 operating hours Klodsinwzhopfx Agzsn - Power steering - Front working lights - New TÜV UVV inspection (surcharge EUR 150 net) Length without forks: 2000 mm Total width: 1080 mm Own weight without battery: 2390 kg Own weight with battery: 3480 kg

Condition: used, LPG forklift truck, gas-powered forklift STILL type RX 70-16T Serial no.: 517314G00021 Year of manufacture: 2016 Rated capacity: 1600 kg Lift height: 4920 mm Fork length: 1000 mm Fork carriage width: 980 mm Overall height: 2160 mm Overall width: 1100 mm Overall length without forks: 2200 mm Unladen weight: 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic sideshift - LPG-electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - Hydraulic power steering - Front working lights - Reversing warning light (blue) - Rear flashing warning light (yellow) - 4-wheel superelastic, solid rubber tyres, front 18X7-8 SE / rear 18X7-8 SE Ksdpfsinldwjx Agzsln - Battery charger for the starter battery, VICTRON maintenance charger - New TÜV safety inspection UVV (surcharge 150,-- EUR net) Good condition

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Kedpfxswypqlo Agzeln Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Vacuum pump, vane pump, rotary vane pump ALCATEL type 100-132 Ksdpfed A Srgsx Agzjln No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Vacuum: 0.5 mbar (specification on the nameplate) Negative pressure: - 0.9 bar (determined during test run) Engine power: 3 kW Engine speed: 1420 rpm. mains connection: 400 Volt, 50 Hz - Oil lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg sound condition

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,810 h, Year of manufacture: 2010 Drive: Wheel Empty weight: 5.550 kg Dimensions (LxBxH): 612 x 229 x 286 cm Kjdpow Afrdefx Agzsln

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 6,560 h, Year of manufacture: 2017 Number of cylinders: 6 Empty weight: 15.000 kg Kodpfx Aoxxkf Sjgzsln Carrying capacity: 10.885 kg GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan Doosan DL06 Stage IV

Condition: used, fuel type: diesel, Year of construction: 2020, operating hours: 5,670 h, Equipment: air conditioning, Year of manufacture: 2020 Drive: Wheel Empty weight: 14.000 kg Dimensions (LxBxH): 769 x 250 x 314 cm Engine type: Cummins Cummins QSB6.7 Digging depth: 5.25 m Kjdpfx Ajx U U Thsgzjln Bucket volume: 0.27 m^3

Condition: used, fuel tank capacity: 300 l, lifting height: 1,310 mm, Year of construction: 2020, operating hours: 5,560 h, Year of manufacture: 2020 Empty weight: 20.094 kg Carrying capacity: 7.717 kg Ksdpfxsxpvi Ds Agzoln GVW: 27.811 kg Dimensions (LxBxH): 796 x 274 x 343 cm Engine type: Cummins Cummins 6,7 l. Stage V 282 CV Bucket volume: 3.5 m^3