Used Load Cell for sale (38,676)

Condition: used, Conveyor Belt, Belt Conveyor Belt, Conveyor Belt, Belt Conveyor, Chain Conveyor, Pallet Conveyor Belt, Pallet Conveyor -Drive: geared motor SEW-Eurodrive with brake 0.55 kW/15 m/min -Weigh cell: Bizerba HLC-C3 -Chain track width: 750 mm -Dimensions: 1995/990/H480 mm -Weight: 334 kg Hsdpfx Afegnnb Sjisfn

Condition: like new (used), Year of construction: 2024, Capacity: 2.500 kN Specification: Threshold setting: Reading begins at 1% of capacity (75 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Hedpfsfpwmpsx Afijfn Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (3.750 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 185 L x 200 W mm, height app. 127mm Height sets to 5.0000" +/- 0.0005" Weight: app. 13 kg inckuding carrying box

Condition: ready for operation (used), Condition Used Stock Number 412957 This listing is for a Instron 2518-807 Tension/Compression Static Load Cell. The unit is in full working condition and is ready for immediate release. The Instron 2518-807 Tension/Compression Static Load Cell is engineered for high-precision force measurements in a variety of testing applications. Its robust design allows for accurate tension, compression, cyclic, and reverse stress testing, making it an essential tool in materials testing and quality control environments. Key Features: Hfjdovi Auqspfx Afion Capacity: Measures up to 100N (22 lbf), making it suitable for a wide range of testing scenarios. Exceptional Measurement Range: Capable of capturing accurate force measurements down to 1/500th of its capacity, ensuring precision in all applications. Automatic Recognition: Features an electronic serial number and electrical calibration, allowing for simple and error-free operation without the need for manual setup. Integral Overload Protection: Designed with overload protection to minimize the risk of damage during both handling and testing, enhancing durability and reliability. Tare Weight: Offers a tare weight capability of 40% of the force capacity, which accommodates the use of various grips and fixtures for added versatility. Compliance with Standards: Fully compliant with international force measurement standards, including ASTM E4, ISO 7500-1 class 0.5, and JIS B7721, B7733, ensuring reliability and accuracy in testing protocols. Compatibility: The Instron 2518-807 load cell is compatible with various Instron testing systems, including the UT and 3300 series. Its versatility makes it ideal for applications in: Materials Testing: Perfect for assessing the mechanical properties of materials under tension and compression. Quality Control: Utilized in industrial settings to ensure product consistency and adherence to specifications. Research and Development: An essential tool for scientists and engineers conducting experiments on material behaviour under different loads.

Year of construction: 2010, condition: used, Shear beam load cell -Nominal load: 500 kg -Nominal value tolerance: %+/- 0.1 Hsdpfxodkpa Se Afisfn -Stainless steel: 1.4548 -Protection class: IP 68 -calibratable -Dimensions: 32/32/130 mm -Net weight: 0.98 kg

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Hfjdjfpwk Repfx Afijn Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box with analog output

Condition: used, Load cell, double bending beam load cell Hsdpfx Aod Al Hiefiefn -Nominal load: 100 kg -Accuracy class: C3 -Cable length: 3 m -Material: stainless steel -Protection class: IP 68 -Dimensions: 39/120 mm -Own weight: 0.4 kg

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Qty 2 in stock Capacity 500 LTS Load cells Hedpfswq Sz Usx Afiefn Mixer Ancillary equipment included

Condition: good (used), Year of construction: 1998, functionality: fully functional, punching force: 30 t, total height: 2,800 mm, total width: 7,000 mm, total length: 12,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, working range: 2,000 mm, type of input current: three-phase, workpiece weight (max.): 150 kg, overall weight: 12,000 kg, table width: 1,250 mm, table length: 2,500 mm, compressed air connection: 6 bar, input voltage: 110 V, Equipment: safety light barrier, Turret punch press Muratec wiedemann Vectrum 3046α + Cell loader F1-1250 Machine is in good working condition. Possible to see. Machine available latest Oktober 2026. --- The VECTRUM-3046 Alpha is a servo hydraulic CNC turret punch press, which incorporates MURATECs indigenously designed servo hydraulic cylinder that allows the operator to set the desired punching speed and positioning of the ram for greater punching control. The VECTRUM-3046 Alpha enables high speed processing, quiet operation, and outstanding quality parts production at the same time. --- Features: - High speed processing : Punching: 400 HPM, Nibbling: 1000 HPM - High precision processing of +/- 0.07 mm - Quiet punching due to optimised control of ram speed - Largest capacity tool - 121 mm (4.75) - Punching capacity 30 Ton [33 US Ton] - Maximum sheet thickness 6.35 mm [0.250] Hjdpfx Ajxm Rkkefijfn - Maximum sheet size puncheable without repositioning (Y x X) 1250 mm x 2000 mm - Maximum sheet size possible to autoload/unload (Y x X) 1250 mm x 2500 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 TruBend 5130X Press Brake BendMaster Robotic Bending System Control System: TASC 6000 (robot and press are programmed via the machine interface) Press Brake Specifications: Press force: 130 tons Bending length: 3,250 mm Year of manufacture: 02.2016 Hfedpfx Asxdfqmofien More information and video available on request ...

Condition: ready for operation (used), General Manufacturer MAVAG Verfahrenstechnik AG Location Bremen Condition used Tank volume 885 liters Vacuum 1.0 bar Max. Overpressure 3.0 bar Max. permissible operating temperature 130 °C Suspended design Hfedpfx Afjuf Ic Hjien Heating/cooling jacket Heating/cooling available Volume double jacket 35.0 liters Max. permissible operating overpressure 6.0 bar Max. permissible operating vacuum 1.0 bar Max. permissible operating temperature 140 °C Temperature control cylinder half-pipe coil Temperature control underbody half-pipe coil Insulation Insulation available Insulation material mineral wool Technical data / dimensions Internal diameter 1,000 mm Cylindrical height 864 mm

Condition: used, Ex-Cell-O XG620 Hsdpfxeurt Tlo Afisfn Excello XG 620 Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Year of construction: 1960, condition: used, centre distance 1200 mm 550 weight of the machine ca. 2,5 t multifix Hsdpsqwpwhsfx Afiefn

Condition: used, Year of construction: 1960, functionality: limited functionality, machine/vehicle number: 410/25 1960, EX Cell O GmbH DLZ 400SL 1050 lathe. Hfedpfxjw H Svco Afijn The machine is operational (but has not been used for several years). On-site testing is possible. Shipping available (costs depend on distance in km).

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need. Hfjdpfx Ast Hw D Dofijn

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Hjdsw Eilyopfx Afiefn Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Hfsdpfx Ajd Nw Ttofion Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: used, color: other, Empty weight: 4 kg Hodpfxenkanbo Afijfn Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, functionality: unexamined, spindle bore: 81 mm, turning diameter over bed slide: 650 mm, center height: 320 mm, turning length: 1,500 mm, Used lathe, see pictures. With Sony digital readout and 660mm faceplate. Year of manufacture: 1976. Hfsdpjwm Rviefx Afion All technical specifications in the last picture. NOTE: The type plate states XD500, but it is actually an XD630, according to the dimensions and delivery note. Center distance: 1500 Trajectory length: 2500 Center height: 320mm With taper turning direction, side guide

Condition: good (used), Rapid Load 12 Bar feeder Bar Loader Hfedpfeuhznbox Afien Turn diameter bed: mm Turn diameter support: mm Passage: 6-80mm Turning length: 150-1215mm X axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation available Location: Hamont-Achel, Belgium Rapid Load 12 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 6-80mm Turning length: 150-1215mm X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation present Location: Hamont-Achel, Belgium Rapid Load 12 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Opening range: 6-80 mm Drehlänge: 150-1215 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Minimum distance between sleeve and drilling spindle (X axis): mm Maximal distance between module and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Steuerung: Fanuc Construction year: 1997 Betriebszeiten: Transportmaße: 166x60x105 cm (LxWxH) Documentation verfügbar Standort: Hamont-Achel, Belgium

Condition: used, color: other, Empty weight: 3 kg Hedpep Atgxefx Afisfn Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 3 kg Hsdjp Atgqepfx Afiefn Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, color: other, Empty weight: 3 kg Hsdspyhcvopfx Afiofn Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, mileage: 310,477 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,490 mm, first registration: 09/2019, fuel tank capacity: 75 l, color: green, number of seats: 3, number of previous owners: 1, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, tail-lift, General information Hfsdpfxjxivkbo Afion Number of doors: 4 Model range: May 2018 - May 2022 Model code: ### Cab: single Technical information Torque: 410 Nm Number of cylinders: 4 Engine capacity: 1.968 cc Transmission: 8 gears, Automatic Weights Empty weight: 3.050 kg Carrying capacity: 450 kg GVW: 3.500 kg Functional Tail lift: Dhollandia DHLM.08, tail lift, 750 kg Interior Interior: grey Environment CO2 emission: 244 g/km Emission class: Euro 6d Consumption Average fuel consumption: 9,3 l/100km (30 MPG) Urban fuel consumption: 11,1 l/100km (25 MPG) Extra urban fuel consumption: 8,3 l/100km (34 MPG) Condition Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), functionality: fully functional, overall weight: 36,800 kg, empty load weight: 9,500 kg, maximum load weight: 27,300 kg, axle configuration: > 3 axles, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 50 mm, first registration: 10/1998, suspension: air, color: red, tire size: 245.70 R 17.5, Year of construction: 1998, Equipment: ABS, Used low-loader semi-trailer with cradle bath, fitted with Bertoja winch, 3 twin-axles with 2nd and 3rd self-steering, air suspension, ABS, year 1998, central cradle with 5.50m effective loading length, loading height from ground 50cm, removable cover over axles, electro-hydraulic winch with hook on neck, aluminium sideboards on neck, stake pockets on deck and 8-ton lashing rings, provision for removable rear ramps, serviced until 30.04.2026 – DEALER INTERDRIVE SRL – PARMA Hfodexgumpepfx Afijn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Hodjxlctzspfx Afijfn Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH