Used Fold Forming for sale (8,565)

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023 Features and technical data: - Machine body: robust, torsion-resistant steel construction - Membrane frame: opening/closing with gas pressure cylinders - Swivel castors: removable, 360° rotatable - Vacuum press pressure: 0.85 kg/cm² (8.5 t/m²) - Vacuum table: 3.68 m²; 31.28 t - Membrane: natural rubber 3100 x 1500 mm - Usable area: 2920 x 1320 mm - Material thickness: 2 mm Lrodpfxoyf R Ale Ahvoi - Colour: grey - Material hardness: 53 Shore A - Tensile strength: 26 MPa - Elongation at break: 690 % - Temperature resistance: max. +130°C - Pressing surface: 2920 x 1320 mm - Becker VT 4.40 rotary vane vacuum pump, 40 m³/h - Power requirement: 1.25 kW Dimensions: 3200 x 1400 x 1000 mm Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 2010, Very good used condition Specifications: Number of roller stations: 9 units Profiling speed approx. (based on 72mm drive roller diameter): 16 m/min Max. sheet thickness for folding: 1.5 mm Max. profile height: 20 mm Working shaft diameter: 28 mm Center distance of working shafts: - Vertical: 72 mm - Horizontal: 100 mm Minimum roller gap (both sides): 60 mm Connected load: 3.0 kW Rated current: - At 230V: 12A Lrsdsx Ekb Ajpfx Ahvsi - At 400V: 7A Fuse protection: 16A Net weight approx.: 430 kg Sound level: 70 db(A)

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine Ljdoyur Axepfx Ahvsri The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. Lrsdpfx Ahoxghngsvoi The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 2011, functionality: limited functionality, We are offering for sale a used, automatic creasing and folding machine "Multigraf Touchline CF375" at a competitive price. Lrodexxb T Topfx Ahvji The machine is operational, but the folding is not entirely precise and requires adjustment. Replacement motor with sensor included. Once adjusted, the machine can function properly, or you can use it for spare parts. Creasing and folding machine 6 standard folding types Easy operation via touchscreen Automatic job changeover without tools Piled feeder and suction belt feed Flexible delivery system Technical specifications: Feeder capacity: 180 mm Max. sheet format: 375 x 1,050 mm (with extension table) Min. sheet format: 105 x 148 mm Double sheet detection: Yes Paper weight: 80–400 gsm or max. 0.4 mm Power supply: 100–240 V, 50/60 Hz Double sheet detection

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Lrsdpfx Aheg Atrvevei

Condition: used, Model: ESF400 Year: 2007 Condition: Used Serial number: 2288 Stock number: 3295 Belt width: 400 mm With bridge breaker Capacity: max 30 strokes/min Hopper: 250 litres Water: max 4 Bar Compressed air: 6 Bar, 300 l/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2250 x 900 x 2350 mm Ljdpfxsyw Sads Ahvsri Weight: 780 kg

Condition: good (used), Year of construction: 1982, sheet width 2000 mm Ledpfx Ahjw N S Eijvori plate thickness 2 mm distance between columns 2080 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0 x 1,2 x 1,5 m Hydraulic swivel bending machine - max. dimensions of the sheet to be bent: 2000 x 2 [mm] - Power of the electric motor: 2,2 kW - Bending angle: 0 - 180 degrees

Condition: used, Flat Pile Feeder Folding Machine Stahl KC 56/6-KTL for 16 pages Cross Fold and 6 buckles 2 knives with Side buckle Falzmaschine / Combination Folding Machine Stahl KC 56/6-KTL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1990 - Serial-No. 41655/90-169032 Arbeitsbreite max. 780mm / Working width max. 780mm Lsdpeyw Hg Sefx Ahvsri Flachstapelanleger / Flat Pile Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter mit Seitentasche / 2. Folding Unit 2 knives with Side Buckle Leimeinrichtung Planatol / Gluing unit Planatol Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2014, machine/vehicle number: 39272, Max. Size : 375 x 660 mm Min. Size : 105 x 148 mm Lrjdpjg Ngtpjfx Ahvsi Paper Weights : 400 g/m2 Paper Weights Min. : 100 g/m2

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Lsdeywpblopfx Ahveri

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW Lsdsy Np Aopfx Ahvsri below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Condition: used, gr. working width: 1020 mm Lrodpfx Ahob Hlyrsvei for sheets (steel sheet) up to: 1 mm space requirement: 1420 x 650 x 1160 mm Weight: 250 kg

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t working width: 4300 mm clear support width: 3600 mm support throat: 300 mm max. assembly height: ca. 500/700 mm Ledpfxe Dnf Uj Ahvsri working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm Lodpfx Ahj Dqaqsvsri support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: good (used), working width: 1,050 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, overall weight: 220 kg, working length: 1,050 mm, max. working width: 1050 mm for metal sheets up to: 2 mm opening width top clamping bar: 60 mm weight: 220 kg Ljdpfxjui Ikrj Ahveri space needed: 1380 x 550 x 990 mm

Condition: ready for operation (used), Year of construction: 1955, gr. Working width: 2040 mm for sheets up to: 1 mm Lredpstgf Nkofx Ahvji Weight: approx. 680 kg Space requirement: 2650 x 650 x 1180 mm

Condition: ready for operation (used), Year of construction: 1951, Large working width: 1250 mm for sheets up to: 1.75 mm Lredpfx Asv D E R Dshvsi opening width of upper beam: 70 mm adjustability of bending beam: 50 mm space required: 1880 x 740 x 1140 mm

Condition: ready for operation (used), Max. working width: 3060 mm For sheets (at 40 kg strength) up to: 4 mm Min. bending radius: sheet thickness x 1.25 Min. inside flange height: sheet thickness x 6 Ljdpjxwnltefx Ahvsri Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Required space: 4150 x 1800 x 2500 mm

Condition: good (used), max. working width: 2000 mm for metal sheets up to: 1 mm Ledpfx Ahe Ixynsvsri opening width top clamping bar: 70 mm adjustment bending cheek: 10 mm space needed: 2300 x 600 x 1050 mm

Condition: excellent (used), Year of construction: 1999, max. working width: 2520 mm for sheets up to: 1.5 mm Opening width upper beam: 180 mm Adjustability of folding beam: 40 mm Lrodsqi Awwopfx Ahvoi Bending angle adjustment: 135 ° Weight: 1970 kg Space requirement: 3630 x 750 x 1250 mm

Condition: good (used), max. working width: 1520 mm for metal sheets up to: 1,5 mm opening width top clamping bar: 220 mm adjustment bending cheek: 60 mm Ljdpfx Astx Unrjhvsri weight: ca. 450 kg space needed: 2150 x 430 x 1500 mm

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm Ledpfx Ahjd Rbz Tovjri opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm clamping bar drive: 1,5 kW below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Year of construction: 1962, condition: ready for operation (used), machine/vehicle number: 62110, max. working width: 2040 mm for metal sheets up to: 4,5 mm opening width top clamping bar: 320 mm adjustment bending cheek: 120 mm clamping bar drive: 2,2 kW below cheek drive: 2,2 kW electrical connection: 5 kW weight: 3700 kg space needed: 3250 x 1000 x 1900 mm Lsdpfx Ahjfnryysvori

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Ledpfx Asywdtvohveri Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.