Used Flooding System for sale (86)

Condition: used, Year of construction: 2018, functionality: fully functional, mileage: 38,675 km, power: 55 kW (74.78 HP), fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, gearing type: hydrostat, suspension: steel, Equipment: ABS, additional headlights, air conditioning, low noise, Street cleaning vehicle: + Schmidt + CityJet 3000 (Swingo + Cargy) + Year of manufacture: 2018 + 38,675 km + 8,903 total hours; 4,420 pump hours + VM diesel engine, 74 HP + Hydrostatic drive (max speed 25 km/h) + 4-wheel steering + Tipper body + Air conditioning Isdpoxxx T Rofx Affetr + Radio/CD + Rear warning system + Reversing camera + Heated mirrors + Spray bar, telescopic left & right, adjustable in 3 segments + Side spray nozzles individually controllable + Fitting for high-pressure gun with hose reel and jib at the rear + Bertolini CK125 water pump, 149 l; 80 bar Municipal vehicle from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, Year of construction: 2014, operating hours: 5,609 h, functionality: fully functional, power: 74 kW (100.61 HP), overall weight: 5,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, operation weight: 2,710 kg, empty load weight: 2,710 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, differential lock, hydraulics, low noise, Sweeper Vehicle: + Multicar Itodpfsxwautex Affor + Tremo X56 + Year of manufacture: 2014 + 5,609 total hours; 4,858 operating hours; 3,122 pump hours + 4-cylinder VW diesel engine, 2.0 L; Euro 5, 74 kW + Hydrostatic transmission with work range (max speed 25 km/h) + Optional all-wheel steering + All-wheel drive + Differential lock + Beacon + Additional work lights + Reversing camera + Rear warning system + Air conditioning + Radio/CD + Front hydraulics with potentiometer + Rear hydraulics + Idle speed increase CMAR Superstructure: + Telescopic sweeping bar with lateral spray nozzles + 2 m³ water tank + Medium-pressure pump 65 bar + High-pressure cleaner at rear + CC600m surface cleaner at rear + Dimensions: 4540 mm x 1340 mm x 2050 mm (LxWxH) + Unladen weight: 2,710 kg; Perm. total weight: 5,000 kg Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Year of construction: 2011, condition: ready for operation (used), A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible. Itsdsx I Rrgspfx Affor

Condition: good (used), Year of construction: 2005, operating hours: 32,099 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 5,800 mm, total width: 4,800 mm, table width: 400 mm, table length: 500 mm, overall weight: 12,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,648 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis horizontal machining center from the manufacturer Starrag. The machine is used, has been regularly maintained, and is in fully functional condition. Machine Details - Manufacturer: Starrag - Model: CWK 400D - Year of manufacture: 2005 - Operating hours: 32,099 - Control: Siemens Sinumerik 840D - Machine weight: 12,800 kg - Footprint (LxW): 5.8 x 4.8 m Technical Data Travel paths: - X = 625 mm - Y = 650 mm - Z = 650 mm - B axis: 360° (0.001° increments) / 100 rpm - Spindle speed: 50 – 10,000 rpm (stepless) - Motor power: 24 kW / 37 kW - Torque: 250 Nm / 350 Nm Table & Pallets - 2 pallets, each 500 x 400 mm - T-slots to DIN 55201 - Load capacity: 400 kg - Pallet changer included (changeover time 8 s / 5 s) Tool Data - Interface: DIN 69893-HSK-A63 - Chain magazine with 60 tool positions - Tool diameter: 80 mm (up to 160 mm with adjacent pockets free) - Max. tool length: 350 mm - Max. tool weight: 10 kg - Total tool weight: 200 kg Equipment & Extras - Coolant system (emulsion, internal & external supply, approx. 1100 L) - Knoll coolant unit with fleece filter (30, 40, 50 bar) - Measuring probe: Renishaw - Tool breakage monitoring in magazine - Chip conveyor - Flood wash, paper band filter, cleaning gun at setup station - Fully enclosed working area to UVV safety standards - Pallet sequence mode - Network connectivity, Ethernet interface - Technical documentation & layout plan included Maintenance Isdpfxex Ib T Ie Affstr - Carried out regularly - Machine is fully functional All details have been prepared to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, DMG MORI DMG MORI LASERTEC 30 SLM (2nd Gen.) Metal 3D Printer 600–1000 W Fiber Laser Itedpex Ei Smofx Affjr For sale is a DMG MORI LASERTEC 30 SLM 2nd Generation, a professional industrial system designed for metal 3D printing using the Selective Laser Melting (SLM) process. This machine is ideal for highly precise functional components, prototypes, lightweight structures, and small-batch production in industry, aerospace, medical technology, and toolmaking. The system has been professionally operated and maintained, and is in excellent condition. Machine Specifications: Model: LASERTEC 30 SLM 2nd Gen. Year of manufacture: 2019 Weight: approx. 1300 kg Dimensions: approx. 1900 × 1100 × 2000 mm Build volume: 300 × 300 × 300 mm Layer thickness: 20–100 µm Laser type: Ytterbium fiber laser Laser power: 600–1000 W Materials: Stainless steel, tool steel, titanium, aluminum, CoCr, Inconel, etc. Control: CELOS Touch-Screen Electrical Data: Supply: 400 V ±10 %, 50/60 Hz Power consumption: 17.3 kVA Max. current draw: 25 A Recommended circuit protection: 25–32 A DC control voltage: 24 V AC control voltage: 400 V Shielding Gas Supply: Gas: Argon 4.6+ Minimum consumption (flooding): 1000 L Average consumption: 72 L/h Gas pressure: 6–8 bar Connection: W21.80 × 1/14" Cooling System (HYDAC RFCS-G2-002600): Refrigerant: R134a Cooling capacity: 2.2 kW Pump capacity: 15 l/min at 3 bar Dimensions: 871 × 610 × 639 mm Weight: approx. 80 kg Fire Extinguishing System: Automatic LIFDESTM system Activation temperature from 110 °C Optical & acoustic alarm (95 dB) Important Note: "The table shown in the photos is not included in the sale." Condition: used The system was fully operational until dismantling, clean, well-maintained, and is in excellent technical and optical condition. Scope of delivery: (see picture) - DMG MORI LASERTEC 30 SLM machine - HYDAC industrial cooler - DMG MORI SmartKey USB dongle - Comprehensive documentation (several folders) - Integrated powder sieving machine - Filter element - Accessories as pictured (Subject to technical changes and errors in specifications!) For further questions, please do not hesitate to contact us by phone.

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand MAZATROL Iedpsx D Emnjfx Affjtr Additional Equipment Knoll Chip Conveyor Hinge Type 640 5-1 ( Knoll Filter System KF200 1250 / Magnetic Conveyor / Pump "Cover Coolant" 100 L/min 2 Bar / High Pressure Pump 31 L/min 70 Bar / Pump "Flood Coolant" 40 L/min 5 Bar / Electric Switch Cabinet / Coolant Gun This 5-axis Mazak Variaxis i-700 was manufactured in 2020, featuring a 40-tool magazine, high-speed spindle at 18000 RPM, and advanced capabilities like 5-axis radius compensation and 3-D coordinate conversion. Ideal for complex machining tasks, it also includes a Knoll chip conveyor and high-pressure coolant systems. If you are looking to get high-quality milling capabilities consider the Mazak Variaxis i-700 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, mileage: 85,528 km, power: 206 kW (280.08 HP), first registration: 12/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total width: 2,500 mm, total height: 3,290 mm, Year of construction: 2004, Equipment: ABS, compressor, MAN LE 15.280 with METZ Turntable Ladder DLK 23-12 PLC 3.2 L32 in ready-to-use condition ----Base Vehicle Equipment: * Suspension type: leaf/leaf * Wheelbase: 4575 mm * Perm. total weight: 15 t * ZF 5 HP 590 automatic transmission with retarder * 125L fuel tank (right side) * Adjustable steering wheel * Axle ratio: i = 4.62 * Differential lock on rear axle * Medium-length cab * Driver comfort seat with lumbar support – Manufacturer: GRAMMER * Passenger seat – Manufacturer: GRAMMER * Fire service exhaust tailpipe * Rapid start system * Anti-lock braking system (ABS) Itodpoxa Sbqefx Affsr * Traction control system * Disc brakes on front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Cruise control * MAN Radio CD 24V * Stabilizers on front and rear axle * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rear-view mirrors * Wide-angle mirrors left and right, heated * Kerb mirror right, heated and electrically adjustable * Electric windows left and right * 4-wheel parking brake * Rear axle automatic snow chains * Continental Scandinavia winter tires Turntable Ladder Superstructure Equipment: * Superstructure: Metz turntable ladder DLK 23-12 L32 CAN with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, nominal rescue height: 23m, nominal outreach: 12m. Stabilization: horizontal-vertical, stabilization width variable between 2,400mm and 4,500mm * Special signaling equipment * Front strobe lights * Martin horn system (4 trumpet) * Stretcher storage for DIN patient stretcher incl. conversion for basket stretcher, load capacity up to 150 kg * Fixed 230V power supply to rescue cage, 2 Schuko sockets in rescue cage * Fixed water conduit on upper ladder section with valve and B-Storz couplings * 3 securing points in rescue cage for crew safety harness * Lifting eye on lower ladder, load capacity up to 4,000 kg * Lifting eye on cage section (between ladder tip and rescue cage) for attaching abseil equipment: load capacity 270kg/400kg * LED area lighting on chassis * XXL platform on turntable base for mounting DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable flood lights at the end of the lower ladder, controllable from main operating panel * Complete service booklet available, all maintenance carried out annually Optional: New 20-year inspection including hose replacement and inspection available on request! Immediately operational vehicle, well maintained inside and out! Non-smoker vehicle! Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: (also WhatsApp) Email: Subject to changes, prior sale, and errors!

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 750 mm, Hartford Pro 1000 – Vertical Machining Center (2006) For sale: A well-maintained Hartford Pro 1000 vertical machining center from 2006. The machine has seen only light production use and has been serviced on a regular basis. Ideal for precision machining, prototyping, and small to medium batch production. Technical Specifications Year of manufacture: 2006 X-axis travel: 1,000 mm Y-axis travel: 600 mm Hpebsx Dx Hnomt Dty Aea Z-axis travel: 630 mm Table size: 1,200 × 600 mm Spindle speed: 8,000 rpm (BT40 taper) Tool changer: 24 stations CNC control: FANUC HARTROL AI300 Spindle motor power: approx. 11–15 kW Machine weight: approx. 6,000–6,500 kg Cooling system: Flood coolant, through-spindle coolant, coolant tank with pump Condition • All axes move smoothly without abnormal noise • Spindle operates properly with no overheating Iedjx Dx Hnjpfx Affotr • Control electronics are fully functional • Regular maintenance performed; filters changed routinely • Machine available for trial machining Included Equipment • Optional BT40 toolholders (subject to separate agreement) • Chip conveyor • Coolant tank with pump • Work lights, full guarding, documentation/manuals Availability & Logistics The machine is available for immediate delivery and is ready for loading. Transport, loading, installation, and commissioning can be arranged within Finland or internationally. The listing was translated automatically. Translation errors are possible.

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Iodpfxex Hff Ee Affjtr

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 Itsdoi D Dgwepfx Affor 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2022, condition: excellent (used), controller manufacturer: SLM, CONTROLS .. CNC controls SLM ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2600 mm .. space requirements -front/back-: 1200 mm .. total height: 2700 mm Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, Iedexyvy Dopfx Affjtr - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness: 20 μm - 90 μm Min. feature size: 150 μm Focus diameter: 80 - 115 μm Max. scan speed: 10 m/s Average protective gas consumption during the build process: 5.0 l/min (argon) Average protective gas consumption during the flooding process: 110 l/min (argon)

Year of construction: 2003, condition: ready for operation (used), Additional Equipment Scaffolding with cladding Work tank // Flood tank 1 // Condensate tank // Flood tank 2 Continuous distillation Automatic sliding door Water separator Bogie without cover Storage with drive Drying cooler Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device Itsdpfxsx D Snfe Affor HD - IFW Circulation filtration including chip rinsing This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Application Types Other Machine Tools

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 53 kg, Caffini Diaphragm Pump Libellula 1-3 - NEW! Equivalent to Wacker Neuson PDI 3A and AMT 337G-96B. Delivery head: 7 m, Flow rate: 333 l/min, Discharge outlet: 80 mm, Weight: 53.5 kg, Honda GX 160 petrol engine with 4.0 kW, Iodpfsx Ak S Tex Affetr including chassis, connection kit, suction strainer, handles solids up to 6 cm. Machine location: Warehouse D-46514 Schermbeck. Applications: ✔ Construction & civil engineering (sludge, gravel, sediment) ✔ Sewer & pipe cleaning ✔ Dewatering of construction pits & shafts ✔ Emergency pumps for flood control ✔ Agriculture, industry, rental _____ Buy Caffini Libellula 1-3 | Diaphragm pump for solids | Dirty water pump 333 l/min | Pump with Honda GX 160 engine | Wacker Neuson PDI 3A alternative | Equivalent to PDI 3A | Honda 3-inch pump | Construction site solids pump | Petrol flood pump | Piston pump with chassis | Construction site pump with suction strainer

Year of construction: 2020, condition: good (used), machine/vehicle number: 054889, Aduna K100 2-Bath Cleaning System (Washing + Rinsing) incl. Vacuum Drying Including the following equipment: - Vacuum drying (Busch pump, rotary vane pump type RA) - Pressure flood spray function incl. quick-flooding - Spray function with 4-arm spray nozzles - Reinforced pump system 5.5 bar - Nozzle air purge to prevent cross-contamination of media Itsdoxz S Utepfx Affer - Impulse drying with thermal coupling - Chip filtration (bag filter) in media return - Automatic sliding door (vertical with viewing window) - Oil separator - Swath steam condenser, air-cooled - User-friendly, programmable control system - Timer, media level control (level regulation) - Automatic dosing unit - Cascading from tank-2 to tank-2 - Remote maintenance Automatic loading unit (buffer for 3 baskets in the loading area, 1 basket in front of the chamber, 3 baskets in the unloading area - 3-1-3) 8 Euro-standard baskets (dimensions: 670x480x400 mm) Max. load: 100 kg Connected load: 27 kW, 55 A For dimensions, see attached layout.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Itedpswc Nvgefx Affor Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Itedpfx Aoudi Uneffsr Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Year of construction: 2025, functionality: fully functional, Dry Ice Cleaning Machine Model X-FORCE – Polish Manufacturer! This listing features a state-of-the-art X-FORCE dry ice cleaning machine, manufactured by the first Polish producer of such equipment. Our devices are sold worldwide and supported by an extensive service network. Itjdjxy Ilfjpfx Affer This is a professional, efficient, and reliable device designed for cleaning surfaces without the use of water or chemicals – the ideal solution for industry, workshops, maintenance, and restoration. Dry ice cleaning technology. Key advantages of the X-FORCE machine: • Polish manufacturing – quality assurance, robust construction, full service support, and spare parts availability. • High performance – effective cleaning with no surface damage. • Mobile and compact – easy to transport and operate. • Environmentally-friendly technology – dry ice cleaning without chemicals and no secondary waste. • Safe operation – 230V power supply, electric vibrator ensures stable ice feed. Technical Specification – X-FORCE: Parameter | Value Dimensions | 100 × 50 × 55 cm Weight | approx. 100 kg Dry ice hopper capacity | 37 kg Operating pressure | 1.7 – 20 bar Dry ice feed range | 0 – 3.5 kg/min Dry ice stream diameter | 1 1/4" Air consumption | 1.5 – 6.0 m³/min (5 bar) Power supply | 230V AC (50/60 Hz) Electric vibrator Applications: • Cleaning of injection molds and dies • Cleaning and maintenance of industrial machines and equipment • Restoration of metal, wood, and stone surfaces • Removal of paints, greases, oils, and industrial contaminants • Cleaning electrical and electronic devices (no risk of flooding) • Post-fire cleanup Why choose X-FORCE: When you purchase a machine from the original Polish manufacturer, you not only receive a high-quality device, but also: • 24-month manufacturer’s warranty • Technical support and operator training • Access to accessories and spare parts • Warranty and post-warranty service on all continents! We are the only dry ice cleaning machine manufacturer offering a 24-month warranty. Brand new machine, ready for operation. Customisation of machine parameters and colour schemes available for larger orders.

Condition: used, Year of construction: 1997, functionality: fully functional, Semi-automatic, angle-opening screen printing machine THIEME 520. Printing format 75 x 105 cm, electro-pneumatic machine with height-adjustable vacuum table plate (up to 40 mm print material height), table plate dimensions approx. 100 x 125 cm, vacuum area approx. 78 x 106 cm, max. screen frame size approx. 120 x 140 cm. Equipped with squeegee pressure control, electronically adjustable squeegee speed, infinitely variable squeegee stroke, adjustable blowing air system, including adjustable multi-print function, with pneumatic screen clamping, easy front screen insertion, supplied with 3 sets of printing and flooding squeegees. 400V, 50Hz, compressed air 6 bar required! Used, year of manufacture 1997, partially overhauled, in good condition. Iodpfoxyvydox Affjtr

Condition: used, machine/vehicle number: 73406, mileage: 28,000 km, power: 88 kW (119.65 HP), first registration: 08/2021, fuel type: gas, maximum load weight: 865 kg, tire size: 195/60 r 16c, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro6, suspension: other, loading space length: 2,000 mm, loading space width: 1,260 mm, loading space height: 1,200 mm, operation weight: 2,480 kg, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, onboard computer, FLOODED VEHICLE NOT RUNNING Ijdjn D Eyfjpfx Affstr BRAND FIAT TYPE VAN MODEL DOBLO' MAXI 1.4 REGISTRATION DATE 08/2021 MILEAGE 28000 POWER (HP/KW) 120CV EMISSION Euro 6D REF. INTERIOR 73406 CONDITION Used Article WITH VAT EXPOSED ABS-CLIMATE-AIRBAG-CRUISE CONTROL-ELECTRIC WINDOWS-PARKING SENSORS-START & STOP-STEERING WHEEL CONTROLS-PLYWOOD FLOORPAN _____ FLOODED OR PARTIALLY FLOODED VEHICLES ARE SOLD TO OPERATORS IN THE INDUSTRY , FOR EXPORT OR FOR SPARE PARTS USE . ALL VEHICLES FOR SALE CAN BE CHECKED AND INSPECTED. OUR SALESMEN ARE AVAILABLE TO YOU FROM MONDAY TO FRIDAY FROM 8:30 AM TO 6:00 PM AND ON SATURDAY FROM 8:00 AM TO 12:00 PM. TO REACH US BY CAR EXIT HIGHWAY A31 THIENE, BY TRAIN THIENE FS STATION. Italian Trucks dealer srl VEHICLE FLOODEDDOESN'T RUN FIAT BRAND DOBLO MAXI MODEL 28000 KM TRAVELED POWER (HP/KW) 120CV ISSUE Euro 6D REF. INTERNAL 73406 CONDITION Used Item WITH VAT EXPOSED ABS-CLIMATE-AIRBAG-CRUISE CONTROL--ELECTRIC WINDOW -PARKING SENSORS-START & STOP- _____ FLOODED OR PARTIALLY FLOODED VEHICLES ARE SOLD TO OPERATORS IN THE SECTOR, FOR EXPORT OR FOR SPARE PARTS. ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED. OUR SELLERS ARE AT YOUR DISPOSAL FROM MONDAY TO FRIDAY FROM 8.30 TO 18.00 AND ON SATURDAY FROM 8.00 TO 12.00. TO REACH US BY CAR EXIT THE A31 THIENE MOTORWAY, BY TRAIN THIENE STATION. Trucks Italiana srl dealer

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Itedpfx Afjv Iff Nefjr Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Itjdsi D Ddijpfx Affjr Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Here we offer a PINK vacuum drying oven. Vacuum drying oven PINK Space required for operation and maintenance Width min. 3000 mm Itsdpfx Afjdf Rw Ssfer Height min. 2500 mm Depth min. 2500 mm Dimensions VT External dimensions: Width approx. 1170 mm Depth approx. 1380 mm Height approx. 1615 mm Total height 1970 mm Interior dimensions: Width approx. 360 mm Depth approx. 735 mm Height approx. 300 mm Vacuum chamber volume 79 liters Operating temperature min. 20 °C max. 150 °C Electrical connection Connected load 3 x 400 V; 50 Hz N / PE 8.5 kVA Heating capacity 6 kW Cooling capacity 6 KW at 15 °C media temperature and 15 °C cooling water Heating: Floor, ceiling, side walls and door double-walled, flooded with thermal medium Heat transfer medium: Mobiltherm 32 heat transfer oil Filling quantity approx. 20 liters depending on the length of the pipework Compressed air pressure 6 bar Nitrogen N2 pressure Nitrogen N2 pressure Allowable operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: gebraucht / used Scope of delivery: (PINK VT 300-600-300-1, operating instructions) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Iodpovuf S Nofx Affetr Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Ijdpju Ebt Uofx Affotr Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Itsdpfou Ebufox Affjr Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.