Spinning machine LEIFELD Spinning moulds

LEIFELD

Condition: excellent (used), Year of construction: 2026, center height: 750 mm, total length: 4,200 mm, total height: 2,800 mm, total width: 2,300 mm, overall weight: 13,000 kg, feed length X-axis: 360 mm, feed length Y-axis: 800 mm, power: 28 kW (38.07 HP), Spinning machine LEIFELD - PNC 750 MACH-ID 9651 Make: LEIFELD Type: PNC 750 Control: BECKHOF PAULI Year: 2026 Retrofitted in 2026 New Controller  New SPS - SIEMENS  Main Power 28 kW Steel telescopic covers CE-Safety fence with door    Optional tooling for Parabolic 1200 mm Old owner machined 3 mm aluminum parts  Commisioning, Training, Tool, Installation Possible !! Max. blank / workpiece over bed:1500 Centre height over bed: 750mm Distance between centers: 1225mm Maximum sheet thickness: 7mm Stroke X-Axis: 360mm Stroke Y-Axis: 800mm Speedrange: 100 - 1000Rpm Power: 28kW Dksdpfx Ajzd Dlvsb Tjp Spindle taper head stock: 11DIN / Camlock Stroke pinole quill: 300mm Length: 4200mm Width: 2300mm Height: 2800mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr Dkjdpfxep Audqj Ab Tsp INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit Dodpjq Dqdiefx Ab Tekp 2260 Ø Center height above the bed 600 mm Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Dkjdpfsxtaxwox Ab Top Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Dksdpex Sx R Sefx Ab Tep Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1979, functionality: fully functional, center width: 2,840 mm, center height: 1,200 mm, center height in crank: 1,700 mm, spindle motor power: 28 W, spindle speed (min.): 5 rpm, spindle speed (max.): 540 rpm, quill stroke: 750 mm, feed force X-axis: 75 N, feed force Z-axis: 110 N, workpiece weight (max.): 3,000 kg, input voltage: 400 V, The machine is in good condition; the control cabinet was replaced 10 years ago. The machine is currently disassembled and stored in the warehouse. If required, we can install the machine and provide training. Dsdpfx Ajy S A Tdeb Tokp

Condition: good (used), Working diameter Ø 2400mm Max sheet thickness: 9,5 mm Djdjucdh Topfx Ab Tjkp

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Dkjdpfsqakhuox Ab Tsp Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: good (used), Year of construction: 1987, functionality: fully functional, center width: 825 mm, center height: 350 mm, spindle motor power: 7,500 W, total length: 2,800 mm, spindle speed (min.): 300 rpm, spindle speed (max.): 2,500 rpm, quill diameter: 60 mm, quill stroke: 500 mm, total height: 2,200 mm, total width: 2,000 mm, overall weight: 3,500 kg, product height (max.): 3 mm, feed force X-axis: 2,800 N, feed force Z-axis: 2,800 N, feed length X-axis: 250 mm, feed length Z-axis: 450 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, The machine is located in our warehouse. It is connected and can be tested at any time. Djdpfxjxfiq Hs Ab Tekp

Year of construction: 1986, condition: ready for operation (used), Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout. Dodpshp N Ucefx Ab Tokp

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Dkedpfx Aomqi Akob Tep

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Dkedpfxjvcfhmj Ab Tjp Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Dedpsycigkjfx Ab Tjkp

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot-controlled polishing machine RPM500_OSZ2 Dkedpfx Absd Dt D Ie Tep with oscillation (50 mm) and feed (100 mm) Polishing disc diameter – 1000 mm Drive power – 4 kW Dust extraction nozzle diameter – 100 mm Two units are available.

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Dsdpfx Ajxp Sb Ajb Tekp Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300