Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Csb Eev Szt Dstxd Hsrb Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Year of construction: 1994, Condition: used, Functionality: fully functional, Available immediately! Cjb Etjiffpmjxd Herb

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 0-202-99-9999, working width: 2,500 mm, workpiece height (max.): 55 mm, total length: 9,500 mm, pass-through width: 2,550 mm, edge thickness (max.): 3 mm, type of input current: three-phase, HOMAG OPTIMAT KF 26 Double-sided sizing and edge banding machine Working width min/max. 230/2550 mm Workpiece thickness (min/max): 8 mm / 55 mm (with profile milling 40 mm) Cam pitch: 1000 mm Insertion length in front of cam: 1160 mm Electronic width and height adjustment Adjustable infeed guide Pneumatic alignment in front of cam counter-holding device Outfeed intermediate conveyor with rubberized chain, length (approx.) 1000 mm Equipment (left and right identical): - Compact double cutting unit with controlled up-cutting milling - QA34 Quick-Melt gluing units with pre-melters - 6-position edge magazine with change function - Pressure zone with NC axis for pre-selecting edge thickness - HL 81/83 trimming unit (feed rate up to 28 m/min) Csbov Sxtuj Etxd Hsrb Chamfer trimming can be finely adjusted via screen/input unit - Pre-milling top/bottom - Profile milling FK 13 top/bottom (corner rounding) with 8-station tool changer, milling heads with iSystem - Universal milling unit 4 kW with insert control - Multi-profile scraper unit MN 21 top/bottom with NC axis infeed - Flat (glue joint) scraper unit FA 10 (3 tracer rollers) - Buffing unit top/bottom with oscillation HOMATIC NC 21 control system All machining motors are driven by electronic frequency converters. Length of the KF 26 machining center: approx. 9.5 m Availability of the system: from June 2025 Professional disassembly of the system can be offered separately.

Condition: used, machine/vehicle number: 007743, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Maximum panel thickness: 50 mm Operating Units: 3 nr Cjbjvxmave Etxd Herb

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 0-200-24-6515, overall weight: 5,000 kg, Homag KL 78 A20/S2/Z edge banding machine Imported from Germany Crebevld T Ho Etxd Hsb Very good condition 2002 New Homag rubbers in the conveyor belt Thickness of the edge band max 20 mm Thickness of the board max 60 mm Thickness of the edge band in a roll max 3 mm Material width min 55 mm Feed max 24 m/min Stepless feed Electric height adjustment Top belt pressure (transmission belt for edge banding of glossy boards). Edge magazine, Number of places for the edge in the magazine 2 Glue system granulate Pre-melter Replaceable glue tank Edge magazine Spray device Pre-milling unit Cutting saws 2 motors Straight and radius milling units 1 End rounding unit 2 motors Scraper unit Flat scraper, Profile scraping Polishing unit Timing units NC axes Left-hand version Machine length 9.6m Machine width 1.3 m Machine height 2 m Control HOMAG HOMATIC NC 21 CE mark Net price I issue a VAT invoice

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition We had the entire machine recalibrated in September 2024. The gluing unit was replaced. The results are perfect with transparent glue and incredible with white glue. The machine runs perfectly and without any problems. Cjb Etxdsv Sm Hcj Hsrb Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1520 mm Measurements depth 4767 mm Measurements height 2126 mm Media Air pressure 6 bar Ceb Etsv H E Rijxd Horb This SCM OLIMPIC K 560 edgebander was manufactured in 2015. Designed for efficient edge banding, it's a robust choice for woodworking professionals. Consider the opportunity to buy this SCM OLIMPIC K 560 edgebander. Contact us for more information. Application Types Edge Banding

Condition: good (used), Year of construction: 2000, gluing (cartridge system) Bucket thickness 0.4 to 8 mm Reinforced roll separator Cutting station Multifunctional milling unit Surface scraper Creb Etxdev Hzi Is Hjb Scraper blade Buffing unit Control Length approx. 4200 mm All information without guarantee

Year of construction: 2012, Condition: excellent (used), Double-sided edgebander SCM STEFANI EVOLUTION C 220 Working width max 3.2m Minimum working width 225 mm Control PC control Creb Eop Aubyjtxd Hsb STEFANI WINEDGE PLUS V06.14.000 software Longitudinal machining Cross machining Request more information

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Cjb Etxdevdf T So Hsrb

Condition: good (used), Code: 0015 Brand: FRAVOL - ITALY Model: RAPID RX 700 - CE Standard Automatic electronic edge bander for EVA - PUR - POLYURETHANE glue, with grinding unit for applying Pvc, Abs , melamine , veneer , solid strip and roll edges, for joinery workshops, custom furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Panel thickness min/max mm 10/120 Panel length min mm 140 Panel width min mm 60 Edge thickness mm 0,4 - 16 Variable feed 10-20 mt/min Automatic presser lift Composition: Touch Screen electronic control 10,7" colour Controlled axis infeed guide Group 2 incoming grinders for perfect panel grinding - Motors Kw 2,2 - Rpm 6000 - Diamond tools mm 100 x 120 x 30 Infrared lamp 0-600 degrees - Watt 600 Cooling anti-adhesive spray system Edge height mm 120 Automatic edge loader Universal gluing unit with pre-melting unit for polyurethane glue and EVA glue - Quick release glue pot - Controlled axis pressers Roll edge cutting 3 mm Pvc/Abs Glue pot cleaning table End cutting unit with 2 tilting motors each 0,50 kW - 12000 rpm Tilting trimming unit with controlled axis - Motors Kw 1,1 - Rpm 12000 Crebovutm Io Etxd Heb Rounding unit with 2 motors with controlled axis - Motors Kw 0,22 - Rpm 12000 Scraping unit with controlled axis Glue scraping unit Brush unit - Motors 0,18 Kw - Rpm 1400 Dryer unit 0-600° - 4000 watt Soundproof booth Fixed panel support roller conveyor Suction n° 7 inlets diameter 80 - N° 1 inlet diameter 120 Installed power Kw 22 Compressed air 6 bar Overall dimensions mm 6730 x 1500 x 1910 h Weight kg 2400

Condition: good (used), Year of construction: 2009, Brandt KDF 891 edge bander, SN 0-261-04-5551, year 2009, Cob Etxdjv Rvp Rs Hjrb Brandt Power Control PC20+ control system, Ligmatech ZHR 05/R/085 return unit, year 2009, SN 0-305-06-2999, conveyor belt with approx. 9 m width, approx. 80 cm

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces Ceb Etxjv H E S Tjd Hjrb This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Application Types Edge Banding

Condition: like new (used), Year of construction: 2023, operating hours: 1,131 h, Functionality: fully functional, machine/vehicle number: 220.09.023.23, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, Edge thickness...0,4-3 (6) mm Panel thickness...8-60 mm Feed speed.. 10+18 m/min. Aggregates: Spraying unit top and bottom - Separating agent Joint trimming unit - dia tools Edge (coil+strips) magazine Crsb Esv Rlzietxd Hsb Quickly changeable application unit + 1 additional, "Easyclean" system "Glue box" system Pressure zone - 1+2 rollers, pneumatical Spraying unit - lubricating agent Guillotine for coil edge 0,4-3 mm End trimming unit 2x0,35 kW, 200 Hz, tilt-able 0-10° Trimming unit - R2+flat, 2 x 0,75 kW, 200 Hz Profile scraping unit, R2, pneumatically ON/OFF Corner rounding unit, 2 motors, servo adjustment Flat scraping unit in nesting execution, pneumatically ON/OFF Buffing unit Spraying unit top and bottom, cleaning agent Condition: Machine is like new, only 19 km of edge was done

Condition: good (used), Year of construction: 2006, - Workpiece thickness: 8 - 50 mm - Edge thickness: 0.4 – 3 mm - Feed rate: 11 m/min - Joint milling unit - Gluing unit - Trimming unit - Flush milling unit - Form milling unit - Scraper unit Crob Ejvdagaotxd Heb - Connected load: 10.5 kW - ex site, free loading in Switzerland

Condition: good (used), Year of construction: 2001, and Edgebanding Machine IMA HKA The IMA HKA Hand Edgebanding Machine is a versatile device for manually applying edge strips or veneer strips to flat workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The machine can be used both manually and with a processing table, providing high flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, they are available new and used in our shop. The HKA consists of two main components: 1. Handheld unit: Automatically feeds the edge strip, applies glue, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, temperature regulator, and various control elements. The handheld unit can be suspended on a balancer to facilitate operation. Operating Methods: • Guided workpiece: The handheld unit is mounted on the processing table, and the workpiece is manually moved. • Guided handheld unit: The workpiece is fixed with vacuum clamps, while the handheld unit is guided manually. Technical Data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Edge strip feed: 20 - 50 mm • Power consumption: 2.6 kW Crob Etov N Nn Dexd Hsb • Vacuum pump capacity: 6 cbm/h • Minimum outer radius: Depending on the bending suitability of the edge material • Minimum inner radius: 150 mm, depending on material properties Optional Accessories: • Boom for attaching a balancer • Vacuum clamping table

Condition: ready for operation (used), Year of construction: 2019, Main Drive Spindle speed range 12000 Spindle motor power 2x 1.1 kW This Felder Tempora 45.03 LX edgebander was manufactured in 2019. It features a pneumatic controlled, Teflon coated glue applicator for 1.5kg EVA granulate, premilling unit with diamond milling cutters, and a comprehensive corner processing unit. Ideal for edge band thicknesses from 0.4 to 3mm and workpiece heights of 10 to 45mm. If you are looking to get high-quality edgebanding capabilities, consider the Felder Tempora 45.03 LX machine we have for sale. Contact us for more information. Application Types Csb Esvyu Rxotxd Hjrb Edge Banding

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements depth 4733 mm Additional Equipment Edging milling unit with diamond tools Glue application unit with pre-melting Trimming unit Milling unit with various positions and directions Profile milling unit for rounded edges Radius scraping and polishing unit This BRANDT KDF 230C Ambition 1230 FC edgebander was manufactured in 2016. It features a robust through-feed system, pneumatic connections at a minimum of 6 bar, and a working height of 950 mm. The machine is equipped with multiple processing units including glue, cutting, and milling aggregates, ensuring versatility in edgebanding operations. If you are looking to get high-quality edgebanding capabilities consider the BRANDT KDF 230C Ambition 1230 FC machine we have for sale. Contact us for more information. Application Types Other Woodworking Machinery Crobevb N I Is Etxd Hjb

Condition: ready for operation (used), Year of construction: 2003, Additional Equipment Glue Part A20 Strip: Max processing strip goods 20 mm, roll goods 3 mm / Trimming Unit HL 05 Bevel/Straight: Motors 0.4 kW each, 12000 rpm / Buffing Unit Top and Bottom: Motors 0.25 kW each Stepless Vertical and Horizontal Axes / Belt Grinding Unit KS 10: For grinding straight edges / Chamfer/Radius Grinding Unit Top PS 42 & Bottom PS 41: Motor 0.55 kW This configuration ensures efficient processing of various materials with versatile trimming, milling, and grinding options. This 4-axis HOMAG PROFI KFL20/29/QA/25 was manufactured in 2003. Ideal for efficient edge banding, this double-sided edgebander represents a robust solution for woodworking needs. Consider the opportunity to buy this HOMAG PROFI KFL20/29/QA/25 double sided edgebander. Contact us for more information. Application Types Edge Banding Crob Ejv Eh R Netxd Heb

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Pneumatically controlled infeed stop // Pneumatic pressure adjustment with driven pre-press roller and post-pressing rollers Top pressure with composite V-belt drive Transport chain with rubber pad, magnetically braked Workpiece support with extendable roller rail Noise protection with individual extraction Quickmelt application unit with electronic temperature control Magazine for solid edges, strips, and rolls Automatic strip separation via vacuum suction cup Edge monitoring with feed stop and edge sequence control Mounted switch cabinet with electronic frequency converter Crobovxl Rtj Etxd Hob This HOMAG KAL 330/9/A6/L edgebander was manufactured in 2011. It features a robust machine stand, electronic height adjustment, and a transport chain with a rubber pad. The machine includes a Quickmelt application unit with electronic temperature control and a pressure zone with pneumatic adjustment. Ideal for processing straight workpiece edges, it supports various edge materials. For more information about this edgebander, please reach out to us. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2009, Additional Equipment Electronically Controlled Feed Speed: 6-30 m/min Roll Edge Thickness: 0.3 - 3.0 mm Edge Types: Paper, PVC, and ABS edges 0.3 - 3.0 mm; Veneer 0.5 - 3.0 mm; Wood slats 0.8 - 20 mm Edge Height: 14 mm - 65 mm Maximum Edge Allowance from Above: For edge thickness up to 8 mm - 5 mm; Over 8 mm - 2 mm This IMA Novimat Contour I/G80/790/L20 edgebander was manufactured in 2009. It is designed for efficient edge banding applications, ensuring precise and consistent results. Ideal for woodworking professionals seeking reliable machinery. Contact us for more information. Application Types Ceb Etevy I Uqexd Hsrb Edge Banding

Condition: ready for operation (used), Year of construction: 2012, Table Outer length 500 mm Outer width 500 mm Additional Equipment Joint Milling Unit: 2 motors, each 4.0 kW, 8800 RPM Heater: Preheats workpiece edges up to 60 mm Glue Application: Handles edges up to 3 mm End Trimming Unit: 2 motors, 660 kW Additional Units: Milling, Multi-Profile Milling, Contour Milling, Multi-Profile Scraper, and Scraper Units; Buffing Unit Automatic Quickmelt hot glue feeder Board Return System with powered roller conveyors, cross conveyor, transport belt, angle transfer, air-cushion tables, and safety fence Crjbevkkrys Etxd Hob This IMA Novimat Concept / I / G80 / 440 / R3 edgebander was manufactured in 2012. It features a robust automatic edge banding and post-processing system, including a workpiece returning system for enhanced productivity. Capable of handling edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-lock system and electronic temperature control for precise glue application. Consider the opportunity to buy this IMA Novimat Concept / I / G80 / 440 / R3 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2010, This BRANDT Ambition 1660 FGC edgebander was manufactured in 2010. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this BRANDT Ambition 1660 FGC edgebander. Contact us for more information. Cebsvy I S Aj Etxd Horb Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2022, Additional Equipment Anti-adhesive spray unit "AAR" - Complete with 2 sprayers and a storage container Spray device for finishing the edge Top pressure with belt Motors with power 4 kW for RT/E pre-milling unit "SGP" glue container with NC dosing Ceramic lamps with infrared rays "MultiEdge" device for the RI/S flush milling unit Additional Equipment Anti-adhesive spray unit "AAR" - Complete with 2 sprayers and a storage container Spray device for finishing the edge Top pressure with belt Motors with power 4 kW for RT/E pre-milling unit "SGP" glue container with NC dosing Ceramic lamps with infrared rays "MultiEdge" device for the RI/S flush milling unit Crob Eteu Dcl Aoxd Hob This SCM Stefani MD RM edgebander was manufactured in 2023. It features adjustable chain feed speeds of 10-22 m/min and handles edge thicknesses up to 15 mm. Equipped with a pre-milling unit, glue unit with quick-change capabilities, and a cutting unit for precise edge finishing. The Maestro active edge control system enhances user interaction for optimal performance. If you are looking to get high-quality edgebanding capabilities consider the SCM Stefani MD RM machine we have for sale. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2008, Additional Equipment This ege bander line consists of an automatic infeed TBH500/D/25/12, a double edgebander KFL525/6/A3/15, a turning station TD31/35/12, a double edgebander KFL526/8/A3/35, a corner transport TFW530/R/RL/30/12/Q and a vacuum outfeed stacker TSP410/D/25/12. Pre-milling Unit: 0.55 kW motors at 12000 RPM. Multi-profile Post-processing Unit: Automated with presets for max. 3 profiles. Automated Pressure Zone Adjustment: For varying edge thicknesses. Air Spray Device: For edge lubrication top and bottom. Ceb Etxdov Ht Hxe Hsrb This HOMAG Edgebanding line was manufactured in 2008. It is designed for efficient edge banding applications, ensuring consistent performance. Ideal for woodworking professionals seeking reliable machinery. Contact us for more information. Application Types Edge Banding