Used Biesse Edge for sale (310)

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Psdpfxsyqxxrs Amkjpt Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type Numerical Control Type ?? / Software Biesse Works N. 1 Working table with N. 10 supports ATS (L = mm 1800) Automatic Tools Changing System (Store /14 folds-positions) Useful working area (X - Y - Z) mm 6735 x 1650 x 290 Psdpfxsy Nk R Ej Amkopt Useful working area (X - Y - Z) in edge banding mm 5780 x 1650 x 60 N. 2 Working areas n. 1 Vacuum pump (capacity m3/h) 250 Front emergency carpets - Motorized carpet to evacuate the wastes from the working process Total power installed KW 31.13 Working group (top): N. 20 Independent vertical boring spindles N. 8 Independent horizontal boring spindles N. 1 Circular Saw N. 1 Vertical electro-spindle HSK F63 (Kw 13,2) Edge Banding group on board, with Glueing Unit (Hot Melt glue) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 4 reels)

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Podpfx Amex A Tk Sjkept Total number of tool changer positions: 31

Condition: excellent (used), Working center with edgebanding unit in very good condition. Ppsdpfeylcgpjx Amkot Technical data will be updated soon.

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) Ppsdoyw Nu Ejpfx Amkjt • Swaying brushes • Edge heater (PH10)

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness (edge banding unit): 14 - 60 mm Maximum panel thickness: 350 mm Pjdpfxoyqzrne Amkept Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction beam traverses: 10 Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Glue unit Tool magazine Grooving unit Number of places in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety grid Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8011

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Ppjdpfx Amewuz Ekskst Total number of tool changer positions: 16

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Short Description • X axis working area: 6735 mm • Y axis working area: 1650 mm • Working Table: Pod and Rail • Main Electrospindle Power: 13.2 kW • Number of Controlled Axes: 4 axes • Max Edge Height: 60 mm • Total Number of Drilling Spindles: 20 • Total Number of Tool Changer Positions: 16 Long Description • Subfamily: CNC Machining Centers for Routing, Drilling, and Edgebanding • Type of Work: Edgebanding, Drilling, Routing • Maximum Panel Passage: 60 mm • Number of Working Fields: 2 • Working Table: Pod and Rail • Number of Rails: 10 • Pod Position Indicators • Vacuum Cups for Securing Workpieces • Number of Vacuum Cups: 40 • Clamps for Securing Workpieces • Vacuum Pump • Number of Pumps: 1 • Single Pump Capacity: 250 m³/h • Boring Units: 1 (Top) • Vertical Boring Spindles: 20 • Horizontal Boring Spindles in X: 4 • Horizontal Boring Spindles in Y: 4 • Router Spindles: 1 (Top) • Number of Controlled Axes: 4 • Automatic Tool Changer • Motor Power: 13.2 kW Ppedeycvcxjpfx Amkot • Edgebanding Operating Units: 1 • Gluing Unit: Mounted on Main Beam • Glue Pot for Hot-Melt Adhesive • Edge Coil Magazine • Number of Magazine Positions: 4 • Grooving Unit: 2 Top Units, Fixed for Grooving in X and Y • Tool Magazine: 1, with 16 Positions • Tools Positioned on the Machining Head • Combination Head for Edge Scraping and Glue Scraping • Air Jet Panel Edge Cleaning Unit • Control System: PC Control • Machine Programming Software: Bsolid • Protective Structure for Operating Units with Safety Sensors • Waste Chip Conveyor

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support Ppedpfxjxraimo Amkst 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Podpfx Amjugpwnekopt Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 Ppsdpfsgipk Ajx Amkst min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: good (used), Year of construction: 2017, On behalf of our client, we offer for sale a Biesse machine approximately 10 years old in good condition. A suitable investment for starting new production with a limited budget. Ppedpjywup Uofx Amkst

Condition: used, Condition: Used - Compatible Machine: EDGE BANDING MACHINE EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Ppodpfsvazxcex Amkst

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Psdpfxsy Uvnae Amkopt Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, empty load weight: 7,200 kg, working width: 1,535 mm, spindle speed (max.): 20,000 rpm, working height: 275 mm, working length: 6,200 mm, Submitting a bid obliges you to collect the machine by June 22, 2026! TECHNICAL DETAILS Number of milling spindles: 2 Milling spindle 1 Number of controlled axes: 5 Spindle speed: 1,000 - 20,000 rpm Main motor power: 9 kW Milling spindle 2 Ppodpfx Amoy Tu Upskjt Number of controlled axes: 3 Main motor power: 18.5 kW Tool changer positions: 22 Tool clamping system: HSK-F63 Working area X-axis: 6,200 mm Working area Y-axis: 1,535 mm Working area Z-axis: 275 mm X-axis maximum travel: 6,820 mm Y-axis maximum travel: 1,963 mm Table length: 6,200 mm Table width: 1,320 mm MACHINE DETAILS Software: BiesseWorks Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,400 x 2,500 mm Unladen weight: 7,200 kg Transport packages: 1 piece EQUIPMENT Vacuum pump Becker VTLF 250 (main motor power 5.5 kW; capacity 250 m³/h) Safety mat Pneumatic material clamping system Beam table CNC documentation: USB stick, user key/licenses

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Ppsdjwvq Hgepfx Amkjt Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Working Table: Fixed pass height Psdpfewvq E Asx Amkopt Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 007849, Max. panel width: 1000 mm Podpfx Amswkfzzjkept Max. panel length: 2200 mm Length of conveyor: 9000 mm Panel return for edgebander: Right

Condition: used, Pressure gauge BIESSE 2424A0007, Ppedpfjlkchyex Amkot

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Flexible front unit protection for loading unlimited Y-size Psdjy U Naijpfx Amkept (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 007870, Max. panel width: 3200 mm Max. panel length: 800 mm No of Bottom Units: 2 No of injectors: 12 Ppsdjwimz Hopfx Amkst

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Podpfewkrqpox Amkspt Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 007869, Max. panel width: 3200 mm Psdpfx Amjwimzyjkjpt Max. panel length: 800 mm No of Bottom Units: 5 Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008338, X axis working area: 4500 mm Y axis working area: 1600 mm Ppodpfx Aox A Tkxemkjt Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 41 Total number of tool changer positions: 37

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Main saw blade projection: 75 mm Ppedpfx Aex A Tk Eomkjt No of Grippers: 9