Condition: used, Year of construction: 2007, Used machine Year of construction 2007 Equipment: Cslev Sv Eheraa E Isrb - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1918 - Trimming unit 1942 M radius, chamfer, flush - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Availability: short term Storage location: Hochheim

Condition: used, machine/vehicle number: 005832, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Celrjiiiyhoaa E Iorb Max feed speed: 11 m/min

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,555 h, machine/vehicle number: CA.03.013.12, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Cslraaong H Uvj E Ijrb Directly available ex works Barneveld (NL)

Condition: excellent (used), Squaring and edging plant Lot 1 Stefani brand complete with automatic loading and unloading Cjlraaowamcxe E Isrb complete with all groups for each process

Condition: like new (used), Biesse edge banding machine made in Italy well equipped, possibility of testing before purchase anti-adhesive liquids pre-milling glue application with a roller pneumatic pre-guillotine pressure rollers finished cutting saws top-bottom milling unit, R1 – R2 corner rounding unit Crjlraajwaa Rpo E Ieb profile scraper flat scraper Anti-adhesive unit polisher max. element height 50mm, minimum 8mm max. veneer thickness in a roll 5mm feed 9m/min machine length without plate 385cm exhibition machine, like new condition, only 150h of operation

Condition: good (used), - Used machine (700-6007) - Max. edge thickness: 8 mm - panel thickness: 50 mm - Feed rate: 11 m/min - Power consumption: 11 kW / 400 V - Work table height: 900 mm - Gluing unit - Snipping unit Colraoupy N Ioa E Iorb - Flush trimming (radius, grade, chamfer) - LxWxH: 3300 x 1400 x 1300 mm - Weight: 550 kg - from place - available from December 2024

Condition: used, Year of construction: 2010, Second-hand machine State of construction: 2010 Condition: top overhauled!Feed speed infinitely variable 10-18 m/minControl edge control 19 with 18.5" touchscreen color screenFolding trimming unit 1802Edge feeding unit 1901Glue application station cartridge 1906MG, with automatic glue height adjustmentPressure unit 1913 pneumaticCutting unit 1918Multifunction trimming unit 1826 MOT 6 with 6 servo axes for flush, radius and chamfer trimmingCopy trimming unit 1983Radius scraper unit incl. pneumatic adjustment 1929Surface scraper 1964Workpiece thickness 6 - 60 mmEdge thickness 0.4 - 8 mmmin. Workpiece width 60 mmShortest workpiece length 180 mmTotal length 5195 mmExtraction connection 180 + 80 mm, 2100 m³/hCompressed air connection 6 bar / 327 NL/minWeight approx. 2200 kgAvailability: approx. 2-3 weeks after order placementLocation: Hochheim Crjlraa Esv Sv D Re Ijb

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Crelrsqy Em Toaa E Ieb Max feed speed: 11 m/min

Condition: ready for operation (used), Year of construction: 2014, operating hours: 224 h, Functionality: fully functional, machine/vehicle number: 200.11.006.14, height adjustment type: mechanical, input voltage: 400 V, power: 11 kW (14.96 HP), operating pressure: 6 bar, Used Format4 Perfect 608 x-motion edge bander from 2014, first owner since 2016, now back for sale after an upgrade to a new Format4 edge bander. Very good condition, not many running meters, well maintained, serviced. Works and can be checked/tested with a test run in our warehouse! Jointing milling Replaceable glue pot Infrared heating lamp Cut-off saw with 2 motors / pneumatically adjustable tilt Celraa Eowatftj Isrb Combination milling unit for radius and flush, motor-adjustable Radius scraper unit, motor-adjustable Flat scrapers, pneumatically controlled 10.4" touchscreen for the 8 controlled adjustment motors, programs, etc. Lighting in the machine hood Extendable support Extremely good condition!! Functional and available immediately.

Condition: used, Year of construction: 2018, total length: 1,000 mm, total height: 150 mm, total width: 5,350 mm, Price: On request Celraasv U Rnio E Ijrb - Year: 2018 - Documentation available: No - Serial number: 18395 - Transport dimensions: 1000mm x 5350mm x 155mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Holzher Traiathlon edgebanding machine Pre-milling Application of glue Patent glue or granulate pneumatic pre-gluing guillotine pressure rollers Pre-cutting saws Up and down milling cutters Up-and-down milling cutters R1-R2 profile scroll earning corners flat cyclone polisher antiadhesive fluids Crjlrasvddnnsa E Isb machine used, performs its functions, has traces of wear and tear

Condition: used, Year of construction: 2012, operating hours: 264 h, Functionality: fully functional, machine/vehicle number: Seriennummer : CA.09.078.12, feed rate X-axis: 9 m/min, total length: 3,200 mm, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, input voltage: 400 V, chip removal: 2 mm, Technical Specifications Year of Manufacture: 2012 Edge Thickness: 0.4-3.0 mm Motor Voltage: 3x 400 V Motor Frequency: 50 Hz Min. Workpiece Length: 210 mm Min. Workpiece Width: 70 mm Workpiece Height: 8-45 mm Chain Feed: 9 m/min Cross-Cut Saw Unit: Yes Radius Scraper Unit: Yes Surface Scraper Unit: Yes Serial Number: CA.09.078.12 CE Version Joining Unit for Max. 2 mm Chip Removal Automatic Feeding of Roll Materials Individual Feeding of Strip Materials Gun Shear for Rigid PVC/ABS up to 3 mm Thickness Teflon-Coated Glue Pot with 1.2 kg Capacity Glue Application via Glue Roller Cross-Cut Saw Unit, 12,000 rpm, 0.27 kW 2 TCT Saw Blades, 100 mm Diameter Z24 Multifunctional milling unit with 2 HF motors with 0.35 kW for radius, flush, and chamfer milling for thin edges Pivoting control panel with LCD display Extraction connection 2x80 1x120 mm Crslraaov U I Sfo E Iob Max. connected load 7.5 kW at 3x400 V / 50 Hz Special equipment: Combined radius and surface scraper Combination unit for G400 / G460 with manually adjustable radius scraper and surface scraper Unit can be mechanically switched on and off Machine still in operation, available from approx. 20 calendar weeks

Condition: used, Year of construction: 2002, Used machine Year of construction: 2002 well-maintained condition (was serviced in 1/2023 before delivery) with convenient PLC control, display at eye level Programs and operating instructions in plain text All units can be selected individually Integrated operating data acquisition and fault diagnosis Crslraov Sv Ebja E Ieb pivoting control panel, program memory, manual pressure bridge adjustment, feed by means of transport chain, feed rate 8/16 m/min Extendable workpiece support, motorized adjustable infeed fence Joint trimming unit 1961, 2x2.0 KW Diamond jointing cutter in synchronous and counter rotation, plunge path 5 mm Edge feeder 1903 Pre-capping up to 3 x 45 mm (depending on material) Automatic feeding of rolls and strips 1906 M glue application system with automatic reloading Automatic glue height adjustment with touch-sensitive nozzle, printing unit 1913 3 rollers 1st roller driven and pneumatically controlled Further pressure rollers can be pneumatically actuated Cross-cut unit 1918 Cross-cut saw pneumatically tiltable from 0° to 10 Multifunctional unit 1942 MOT 2 for flush radius and bevel trimming motorized adjustable Corner cutting unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of the horizontal tracing rollers Chip box for radius scraper, Surface scraper 1964 for removing the adhesive residue for a clean glue joint with extraction hoods Buffing unit 1940 for finishing and polishing edges ----- Technical data ----- Edge thickness of rolls: 3 mm, Edge thickness of strips: 8 mm, max edge thickness corner copying: 3 mm, Workpiece thickness: 6-45 mm, Workpiece thickness corner copying: 45 mm, min. Workpiece length: 180 mm, feed speed: 8/16 m/min, Distance workpiece support: 470 mm, Support plate Ø for edge material: 800 mm, Cross-cut blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of jointing cutter: 2 x 2 kW, Cross-cut saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction nozzle for jointing trimming unit: 120 mm, Extraction nozzle for trimming unit: 70 mm, Extraction nozzle for scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm, Location: Hochheim Availability: short term

Condition: used, machine/vehicle number: 005793, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Cslraaehwkafe E Iorb Max feed speed: 11 m/min

Condition: used, Wood Her STREAMER 1057 FÜ + PU edge thickness 0.4 - 6 mm Modern control unit with selector switch for setting the units Pre-milling unit for joining before the gluing unit Fully automatic edge magazine for rolls and strips GLU-JET cartridge glue application station + PU gluing Glue application by means of nozzle technology Workpiece height 6-60 mm auto. Glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Pneumatic snipping unit for rolls and strips up to 6 mm edge thickness with pneumatic changeover from 0-10° cross-cut saw angle Trimming unit, flush trimming 6 mm, radius trimming - chamfer trimming - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - Finish Spraying unit - PU Colrov Rx Atoaa E Iorb Machine with all processing tools Machine is WORKSHOP TESTED in TOP CONDITION

Condition: used, Year of construction: 2007, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Colrsv U Nrasaa E Ierb - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING glue application by roller, pneumatic preliminary guillotine Cslrasv Uy Rasa E Iorb pressure rollers finished cutting saw top-bottom milling unit, R1 – R2 pneumatically adjustable corner trimming unit pneumatically adjustable flat scraper max. element height 40mm max. veneer thickness in roll 3mm feed 10m/min power consumption 12KW machine checked, ready for testing, very good condition, fully fulfills its functions

Condition: excellent (used), Year of construction: 2010, operating hours: 2,419 h, Functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return and PU glue Box Top maintained Year of manufacture 2010 Operating hours 2419 H Total edge length: 201744 m Edge thickness max 12 mm Panel thickness max 60 mm Roll material thickness max 3 mm Workpiece width min 70 mm Crslrsvnwf Ujaa E Isb Feed max 18 m/min Feed infinitely variable Height adjustment motorized Glue system granulate Pre-melting container BRANDT glue system QUICKMELT KD 2 x PU glue tank Strip magazine Joining milling unit Cross-cut saw unit 2 motors Flush/radius/chamfer stations 1 Corner copying unit 2 motors Scraping unit Profile scraper, flat scraper Buffing unit Units clocked NC axis(s) Version Right-hand machine Machine length 5,760 mm Conformity marking CE mark Return Ligmatech Boomerang PU glue box is still in operation, viewing desired ,available by arrangement no guarantee collection only, forklift available net price plus VAT price negotiable

Condition: used, Year of construction: 2008, Used machine Year of construction: 2008 Edge Control with 18.5" touchscreen color screen 16:9 swivel control panel, program memory, motorized pressure bridge adjustment, Feed by means of transport chain, feed rate 8-18 m/min Extendable workpiece support, motorized adjustable infeed guide Joint milling unit 1961, Diamond jointing cutter in synchronous and counter-rotation, automatic adjustment to workpiece height Edge feeder 1903 Pre-capping up to 3 x 45 mm (depending on material) Glue application system 1905 Multi system Automatic glue height adjustment with touch-sensitive nozzle, Pressure regulator for regulating the cartridge contact pressure, use of PUR glues possible, Printing unit 1913 MOT, 1st roller driven Cross-cut unit 1918 with pneumatic adjustment Cross-cut saw can be tilted pneumatically, Multifunction unit 1824 MOT 4 with multifunction cutter Radii 1,2,3 mm Corner cutting unit 1832 Corner cutting function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of the horizontal tracing rollers with pneumatic adjustment (separate top and bottom) Chip catcher box for radius scraper, Surface scraper 1964 for removing the adhesive residue for a clean glue joint with extraction hoods Spraying device 1856 for the infeed and outfeed area Buffing unit 1940 for finishing and polishing edges ----- Technical data ----- Edge thickness of rolls: 3 mm, Edge thickness of strips: 8 mm, max edge thickness corner copying: 3 mm, Workpiece thickness: 45 mm, Colraajv Sv Eno E Ierb Workpiece thickness corner copying: 45 mm, min. Workpiece length: 180 mm, feed speed: 8-18 m/min, Workpiece support distance: 470 mm, Support plate Ø for edge material: 800 mm, Cross-cut blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of jointing cutter: 2 x 2 kW, Cross-cut saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction nozzle for jointing trimming unit: 120 mm, Extraction nozzle for trimming unit: 70 mm, Extraction nozzle for scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Image of the operating hours is from a photo taken in 2022 Availability: short term Storage location: Solingen

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Croljt Hmtzeraa E Iob Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, Year of construction: 2009, Used machine Year of manufacture 2009 Single-sided automatic edge banding machine with CNC control 10" touchscreen Cjlsv R Nk Usraa E Ierb Industrial conveyor chain 1"1/4 Joining trimming unit FI-502 Glue application unit VC-710 Cross-cutting unit IN-801 Flush trimming unit RS-100, top and bottom 2 motorized multifunctional units: CR-202 profile trimming unit (FAST system with 4 positions as standard) RBK-503 NC scraper unit, 2 positions RCC-701 flat scraper Workpiece thickness 10-65 mm Max. workpiece height with profile trimming unit (depending on profile) 35-65 mm Edge thickness for rolls 0.4-3 mm Edge thickness for strips 0.4-22 mm (depending on unit) Min. workpiece length 140 mm Min. workpiece width (at length 140 mm) 85 mm Min. workpiece width (at length 250 mm) 50 mm Feed speeds 10-14-18-20 mm Central extraction connection 200 mm Extraction connection for gluing 80 mm Extraction connection for joint milling 120 mm Glue container capacity approx. 3 kg Heating time at 1/2 fill approx. 10 min. Length 6000 mm Width 1780 mm Height 1770 mm Machine does not include the workpiece return device shown in the pictures. Availability: Short term Location: Röllbach

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr Colrasvizt Eoa E Iorb

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material Crjlraaev R Nlfs E Iob With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: used, machine/vehicle number: 007575, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Crslraajuxg T Ho E Ieb

Condition: used, machine/vehicle number: 006374, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Crjlrjl Txv Eoaa E Ijb Operating Units: 10 nr