Used edgebanders for sale (563)

Condition: used, machine/vehicle number: 005062, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Bedpfxsybawdj Ak Eowl

Condition: used, machine/vehicle number: 007840, Type of edging: Thin edge, Thick edge Gluing System: PUR Bjdpfxoyg Eg Is Ak Ejwl Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: good (used), Year of construction: 2004, Used Edgebanding Machine Model: Hebrock AKV 3005 DKF Year of Manufacture: 2004 Direct glue application onto the workpiece Includes jointing unit Edge material magazine divider High-frequency cross-cut saw Bwodsyyw Tzopfx Ak Esl Chip collection box (cross-cut saw) Pneumatic roller end trimming Control panel, PLC control system Transport chain with fixed, special chain plates Double roller top pressure (ball bearing mounted) Outrigger (extendable towards the front) Automatic central lubrication (cross-cut saw, corner rounding unit) Quick heating glue pot (maintenance-free, Teflon-coated) Maintenance- and operator-friendly design Corner rounding unit Profile scraping unit Surface scraper Chip collection box (scraping unit) Max. edge thickness: 3 mm Min./max. workpiece thickness: 10 / 40* mm Min. workpiece length: approx. 200* mm Min. workpiece width: approx. 70* mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Max. total connected load: 12 kW Electrical connection: 400 V / 3 Ph / 50 Hz Dimensions (L x W): 5000 x 1445 mm Height: 1620 mm Weight: 1400 kg

Condition: excellent (used), SCM K360 HP Edgebander Liquids Pre-milling cutters, Glue application by roller, Interchangeable glue tank Equipped with glue discharge Pneumatic pre-cut guillotine, Finishing saws for precise trimming Top-bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polisher, Machine equipped with NC control Max workpiece height: 60mm Max edgeband thickness in roll: 3mm Bjdpfx Akjyyvg He Eowl Feed speed: 11m/min Original mileage less than 10,000 meters; in my opinion, its technical condition is not far from a new machine Can be checked and tested on site

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, Trimming, gluing, end trimming, edge trimming, corner rounding, scraper-edge, and polishing. Our ECO F7 stands out from other compact edge banders because all the functional modules of the Eco F series are derived from, and suitably adapted from, industrial edge banders. While maintaining the same high precision and stability as industrial edge banders, the maximum durability and operational efficiency of the equipment are preserved. The Eco F series saves space and provides excellent edge banding results. It is ideal for small furniture factories, decoration workshops, and woodworking shops; it also serves as an excellent solution for small batch production in large-scale furniture manufacturing facilities. Most components are sourced from high-quality, well-known brands, such as: SIEMENS, AUTONICS, HONEYWELL, OMRON, and DELTA. Includes: – Infrared heating lamp – Glue scraper – Meter counter – Cleaning liquid – Release agent Bwedpouzxk Ajfx Ak Eol MOTORIZED HEIGHT ADJUSTMENT Complies with the latest CE regulations.

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Bwsdpfx Aksyvt Exs Eol Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, The used FELDER G 460 is a compact and powerful edge banding machine designed for professional applications in crafts and small-scale industry. It enables precise edging and post-processing of edge materials, impressing with reliable technology, user-friendly operation, and high-quality workmanship results. Bwedeyyk Sqspfx Ak Ejl Machine features: - Glue unit for hot-melt adhesive - End trimming unit (front/rear) - Flush milling unit - Fine milling/radius unit - Combined radius and surface scraper unit - Sturdy machine construction Further technical data: - Edge thickness: approx. 0.4 – 3 mm - Workpiece height: approx. 10 – 45 mm

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min Bodpfoc Tmygsx Ak Ejwl compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Bwjdehy Tlropfx Ak Eol (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood Bodpofbr S Refx Ak Eewl machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations Bjdpfx Ajl D Rp Eok Eowl

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges Bwodpsc S Di Rsfx Ak Eel kid for quick exchange of glue unit ...

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate Bwjdpfjbahd Eex Ak Esl buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Bjdpfx Akolc Ewio Eewl Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: used, workpiece height 20-90 mm device 1: Schleifaggragat device 2: Fräsaggregat device 3: Profilschleifaggregat Automatic edge processing machine Rehnen type KBA for the automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise sanding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for joineries, furniture making and industrial woodworking. Includes replacement sanding belts and cutters. Unit 1: Sanding unit, oscillating Unit 2: Milling unit, top and bottom Unit 3: Profile sanding unit Bodpoyb Sdcjfx Ak Ejwl Accessories: For edges R5

Condition: good (used), Code: 0338 Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge bander with a cartridge-based adhesive system for wood edges, pvc, abs, veneer, suitable for furniture, panels, custom-made furnishings, kitchens, bathroom cabinets, carpentry shops, and various - CE Standard Features: Quick glue replacement: patented cartridge system that allows for quick and efficient switching between EVA and PUR glue during operation, or for changing glue colors - Simply replace the cartridge, no complicated cleaning of the glue tank is required - Ready for use in 3,5 minutes Technical data: Min/max panel height mm 6/45 Applicable edge thickness mm 0,4 - 6 Max gluing height mm 51 Min panel width mm 60 Min panel length mm 180 Feed speed mt/min 8 Composition: Gluing unit: Automatic feed for roll and strip edging - Patented Holz Her cartridge system - Roller press unit Tilting front and rear end trimming unit - Motors 0,22 Kw Multifunction unit with controlled axis for trimming and chamfering - N° 2 motors 0,6 Kw Edge scraper unit Bwedpfx Ajyvh Syjk Ejl Glue scraper unit for removing any glue residue Brush unit for perfect cleaning Holz Her control system: Rotatable and tiltable control panel - All units can be activated individually - Unit functions with text display and graphical support - Display for unit preselection - Program list with program names and numbers - Self-diagnosis Soundproof booth Compressed air 6-7 atm Overall dimensions mm 4300 x 1200 x 1675 h Weight kg 1700

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Bjdsyuyluspfx Ak Eswl Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, power: 16.2 kW (22.03 HP), input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, overall weight: 2,200 kg, TECHNICAL DETAILS Bedpfxjyuyfze Ak Eowl Number of machining units: 10 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough trimming unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Fine trimming unit Tools included 8th unit: Corner rounding unit Tools included 9th unit: Radius scraper unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Power: 16.2 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,415 x 1,670 mm Machine weight: 2,200 kg EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Bwjdpjyux Riefx Ak Esl Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Power: 11 kW Line voltage: 400 V Bodpfx Ajyux Egsk Eswl Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, height adjustment type: mechanical, overall weight: 450 kg, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg Bodpswb Ha Tefx Ak Ejwl

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 9 m/min, total length: 4,400 mm, total width: 685 mm, Equipment: CE marking, documentation/manual, SCM Olimpic K 230 evo edge banding machine in excellent condition. Bought new, first owner. All documentation and tools are included. Extraction pipes with branches are included up to the shut-off valve. Extra set of diamond pre-milling tools. Additional options: - Rounding unit - Nesting sensors - Riepe bottles at 3 positions - Glue scraper unit Technical data: - Feed speed m/min: 9 - Panel thickness mm: 8 – 60 - Edge band thickness in strips mm: 0.4 – 3 Bwsdpeyxhqnjfx Ak Eol - Edge band thickness on roll (incl. covers) mm: 0.4 – 3 - Max. cross-section edge material for cutting mm²: 135 - Roll holder diameter mm: 780 - Max. edge band overhang vs. panel mm: 4 (2 – 2) - Min. distance between 2 panels mm: 700 (600*) - Min. panel length (minimum width 100 mm) - With edge band in roll or strips mm: 160 (140*) - With solid wood strips mm: 220 (140*) - Min. panel width with edge band on roll (min. length 210 mm) mm: 90 - Working height of the machine mm: 900 - Width of fixed panel support mm: 500

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. Bsdpfx Akoytr Hbo Eswl External reference: 6216

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Condition: used Type: edge bander Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Bjdeyw N Apopfx Ak Eowl Please do not hesitate to contact me if you have any questions. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, power: 11 kW (14.96 HP), workpiece width (max.): 70 mm, overall weight: 800 kg, working height: 870 mm, Technical data: max. edge thickness: 5mm / 8mm max. workpiece height: approx. 40mm / 50mm min. workpiece height: approx. 250mm / 300mm min. Workpiece width: approx. 70mm Feed speed: approx. 11m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11kW Electrical connection: 230/400V / 50/60 Hz Work table height: 870mm Bwjdpfx Akeug Uqaj Esl Dimensions (LxWxH): 4100x1400x1300mm Condition and details see pictures