Used edgebanders for sale (581)

Condition: used, Year of construction: 2010, operating hours: 24,804 h, functionality: fully functional, machine/vehicle number: 0-200-95-8810, We have a fully operational Single side edge bander with return conveyor very high spec machine .The machine is currently being used so more than welcome to see it run. Rjdpfx Ahox Upuaozsbt

Condition: new, Year of construction: 2026, Machine includes: Pre-milling, pre-heating, pre-melting, pressing, fine trimming, end cutting, corner rounding, cutter scraping, flat scraping, buffing Heavy duty machine body and most mechanical machine parts are proceeded by advanced CNC machines for higher stability and longer service life without deforming; Merges numerous functions in one machine, including pre-milling, pre-heating, pre-melt gluing system, snipping, end trimming, fine trimming with servo, corner trimming, scraping with servo, surface scraping and buffing, sprayers, edge banding work can be done in one process. Rbsdpfx Aoxd Ubbohzot Intelligent PC control, infeed fence, tape pressing rollers, fine trimming and scraping are servo adjust. Corner rounding pneumatic adjust. Machine Speed 16/20/24m/min; Nesting kit design, pre-drilled nesting hole friendly Fine trimming and Corner rounding by HSK25

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650 Rsdpfsx A Thqsx Ahzebt

Condition: used, Year of construction: 2010, The machine operates perfectly; the front glue unit requires cleaning. Fully operational Year of manufacture: 2010 Radius scraper Rbsdpfxox Hqdmj Ahzet Surface scraper Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Machine no.: 200.07.011.10

Condition: used, Year of construction: 2019, operating hours: 3,488 h, functionality: fully functional, machine/vehicle number: 0-261-71-2252, type of input current: three-phase, input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, We offer this used HOMAG EDGETEQ S-300 edgebander, year of construction 2019. Type: EDGETEQ S-300 Subtype: OPTIMAT KDF 440 C Machine number: 0-261-71-2252 Wiring diagram: 0-261-71-2252 Year of manufacture: 2019 Supply voltage: 400Y/230 V Phases: 3 Phase Frequency: 50 Hz Maximum operating full load current: 22 A Fuse rating: 25 A Short circuit current rating: 5 kA rms symmetrical Control voltage: 24 V Enclosure type: NEMA 1 Largest motor current: 5.7 A Largest heater current: 2.3 A Rbsdpfxjx Tt D Nj Ahzst This machine is distinguished by its clean history and professional maintenance: Exclusive Service: Installation, commissioning and absolutely all periodic maintenance operations were carried out only by HOMAG authorized technical teams.Disassembly: It will also be carried out by HOMAG technicians, eliminating the risks of unprofessional disassembly.Reinstallation: At the buyer's request and for a fee, installation and commissioning at the new location can be requested directly through Homag Romania. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with Return Conveyor and PU Glue Box, Excellent Condition Year of manufacture: 2010 Operating hours: 2,587 h Total edge length processed: 216,000 m Maximum edging thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roll material: 3 mm Minimum workpiece width: 70 mm Maximum feed speed: 18 m/min Feed speed: infinitely variable Height adjustment: motorized Glue system: granulate Pre-melter BRANDT glue system QUICKMELT KD 2 x PU glue pots Strip magazine Jointing milling unit End trimming unit with 2 motors Flush/radius/bevel stations: 1 Corner rounding unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing unit Aggregates sequenced NC axis/axes Version: right-handed machine Machine length: 5,760 mm Conformity mark: CE Return conveyor: Ligmatech Boomerang PU glue box Still in operation, inspection recommended, available by arrangement No warranty Pick-up only, forklift available Net price edgebander: €26,000 plus VAT Net price panel return conveyor: €7,000 plus VAT Redpfevnwf Uex Ahzebt Machines can also be purchased separately Price negotiable

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available Redex Tqgbjpfx Ahzjbt - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, machine/vehicle number: 008107, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 310/9/A20/S2 Redpfx Ahsw U Rqzszsbt Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 310/9/A20/S2

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Rbjdpfx Asx A Hi Iohzot Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05

Condition: used, machine/vehicle number: 007983, Position 1: Single Edgebanders SCM-STEFANI KDR Position 2: Panel Return Systems SCM-STEFANI KDR Rsdpfx Ahjwqndlezsbt

Condition: used, machine/vehicle number: 008148, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Rodpfx Asxtugcehzsbt Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 210 AMBITION 2274

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC Rbedpfxowukywe Ahzet

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Rbsdpfewuuc Asx Ahzet

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Redpfxjw Tq Iws Ahzsbt Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW With quick-heating glue reservoir Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Outrigger, foldable and extendable to the front With chassis L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim Rbjdpfjx Rr Dvex Ahzot

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Pre-milling cutters, Glue application with roller, equipped with glue drain, Rbsdpfx Ajw I Sp Sshzet Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, liquids before scraper, flat scraper, polisher, max edge tape thickness in roll: 3mm, max edge thickness for lipping: 12mm, machine in very good condition.

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm Rbjdowmc I Dspfx Ahzjt max veneer thickness in roll 3mm feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Condition: excellent (used), Edge bander Holzher Streamer 1057 Rbodpfsxf H Rdox Ahzst Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: used, Edgebander Holzher Sprint 1317 Pre-milling units Glue application, glue cartridge Pneumatic pre-cut guillotine Pressure rollers Cut-off saws Top and bottom milling units Corner rounding unit Profile scraper Flat scraper Polishing unit Max edge height mm: 50 Rjdpfx Ahex Tf D Uezsbt Edge band thickness in roll: 3 mm Feed speed: 10 m/min The machine requires servicing as well as setting and adjustment. The machine can be switched on; all units activate, but the front saw does not respond to material and the corner rounding unit needs adjustment.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Full SCM line Rjdpfot T Sq Eex Ahzebt

Condition: excellent (used), Year of construction: 2014, Used edge banding machine from business liquidation STEFANI One Touch - Year of manufacture: 2014 Rjdpox Tcwfsfx Ahzsbt - including BARBARIC return system from 2016 - immediately available We are happy to answer any questions you may have.

Condition: used, Year of construction: 2016, Panel feed direction: from operator to the left Max. edge thickness: 2 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 40 mm Min. workpiece length: 180 mm Feed speed: 7 m/min Heating time: 4 min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter Rbodpfx Aex Tct Hohzst Diameter: 70 mm Height: 43 mm Infeed fence adjustment: Diamond cutter Cross-cut shear up to: 2 mm Single edge feeding: possible Gluing: glue contact roller Cut-off saw: Yes Combi unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Scraper: Yes, sensing Aggregate display: on display Control type: PLC route control Operation: touch-screen Motor power: 7.4 kW Travelling gear: Yes Extendable roller support: Yes Protective hood: Yes Approx. weight: 750 kg Extraction diameter: 140 mm Electrical connection: 400 Volt/50Hz Storage location: Customer

Condition: used, Year of construction: 1994, Machine: Edge banding machine Manufacturer: Hebrock Redpfx Asx Tcbqjhzjbt Model: AKV 2001 DK Year of manufacture: 1995 CE type tested GS wood dust tested Workpiece width min.: 70 mm Workpiece length min.: 300 mm Workpiece height min.–max.: 8 – 50 mm Edge thickness min.–max.: 0.4 – 8 mm Feed speed: 11 m/min Heated infeed fence New compressed air line Crosscut saw unit Flush and radius milling unit Hot-melt adhesive container Support plate Pneumatic end trimming up to 3 mm edge thickness Flush trimming unit with combination cutter for radius, straight, and chamfer milling Extraction connection: Ø 140 mm Connection: 380/50 Volt/Hz Total connected load: 12 kW Weight: approx. 550 kg

Condition: new, Year of construction: 2025, Professional EBM 360B table edge banding machine. The machine is designed for edge banding of both straight and curved elements. Ideal edge banding machine for medium and large workshops and carpentry shops. Pneumatic shears for cutting the edge (adhesive tape). Solid, strong construction. This machine feeds, cuts and glues the edge. The tape feeding and cutting sensor automatically takes the cut tapes from the container. Easy to use and conveniently placed control panel. Work comfort and failure-free operation of the machine are ensured. The indisputable advantage is the simple construction and intuitive operation. TECHNICAL PARAMETERS EDGE WIDTH 10-60 (68) mm EDGE THICKNESS 0.3-3 mm MINIMUM WORKING RADIUS 20mm MAX. PERMITTED CUTTING WIDTH 50 mm HEATING POWER 2 kW Rjdpfowl Eaasx Ahzjbt POWER SOURCE 400V MOTOR 0.18 kW, 0.37 kW, 0.4 kW FEED SPEED 0-14 m/min. AIR PRESSURE 6 BAR DIMENSIONS 1550 x 800 x 1000 WEIGHT 185 kg

Condition: new, feed rate X-axis: 7 m/min, workpiece height (max.): 50 mm, type of input current: three-phase, input voltage: 400 V, With corner copying, suitable for plastic edges from 0.4 - 3 mm, solid wood edges up to 3 mm, and workpieces from 8 - 50 mm, with pneumatic adjustment. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Premium equipment for high productivity with minimal space requirements! Intuitive operation with eye-S control and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to the processing program; error diagnosis for quick resolution of simple faults; statistics on processing parameters; USB connection; network connectivity ready; prepared for Industry 4.0 with API REST data transfer protocol. Outstanding accessibility to work units thanks to the large hood, which also provides protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Cut-off saw unit with corner rounding (me 35 tr s): for trimming the edge and rounding corners on the top and bottom; for edging solid wood, trimming is done with the radius milling cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Adjustment of infeed fence via spacer plates Dimensions and Weights Length (product) approx. 3314mm Width/depth (product) approx. 1085mm Height (product) approx. 1300mm Weight (net) approx. 623kg Flush radius milling unit Rated output: 2 x 0.35kW Cutter diameter: HW55.3mm Spindle speed: 12000min⁻¹ Extraction port diameter: 60mm Number of extraction ports: 2 Corner copying unit Rated output: 0.35kW Tool diameter: 58mm Speed: 12000min⁻¹ Electrical data Connection voltage: 400V Mains frequency: 50Hz Glue unit Glue pot rated output: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5bar Air consumption: 470l/min Feed Feed rated output: 0.55kW Feed speed: 7m/min Edges Edge thickness (coil material): 0.4 – 3.0mm Pre-milling unit Extraction port diameter: 2 x 80mm Rated output: 3kW Cutter speed: 7200min⁻¹ Diamond cutter diameter: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Rated output: 2 x 0.14kW Speed: 2800min⁻¹ Workpiece Rbodoxxvanepfx Ahzjt Workpiece thickness: 8 – 50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm