Heating basin for edgebanders

ENA 4

Condition: good (used), Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container Hnsdpfjd Duvcsx Ahvei -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: ENA -Type: 4electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Condition: good (used), functionality: fully functional, Tested, functional equipment, used edge bander BIESSE Polymac model LATO 38 - Glue pot - Guillotine - Front/back trim - 1 tiltable top/bottom flush trimming - 2 tiltable top/bottom flush trimmings Hnsdpfx Aouhm Adehvei - Exit brushes Possibility to test at our facilities Machine visible in our Cosne workshop Price includes loading onto truck

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA Hnedpfx Aed Dt Rzohvei -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm Hnjdpfxowv Uq Ae Ahvsi - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Hjdjhvahhjpfx Ahvsni Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,65 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Milling grooving Unit 2 x FB 30 (Kw 5 x 2) 0 - 90° Profile Scraping unit (Multi-profile, by N.C.) RBK - 503 (2 POSITIONS) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Hodod Tx A Espfx Ahvsni Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Condition: used, SCM Selecta C edge banding machine Edge banding height 10-60 mm edge banding thickness 0,4-25 mm Caps Overlapping edgebanding bevels - 25 mm for solid wood Hedpfxsddn Svo Ahvjni Pivoting edgebanding unit for foil and ABS edges Radius scraper chamfering Buffing unit Space requirement Length 6345 Height 1530 Depth 1106 mm scm_selecta (1)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Hnodpfsltmnlex Ahvji Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: excellent (used), 2 pieces shooting head and one shooting head extension for a Roeper H12, very good condition, ready for immediate use Hsdpfx Ahjd Tx Azjvjni

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm Hnjdpox R E Nfefx Ahvei This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for tact us for more information. Application Types Edge Banding