Used Scm Edge Banding Machine for sale (579)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/105752, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, control type: PLC-controlled, TECHNICAL DETAILS Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed: 12–18 m/min Cjdjxx Nf Djpfx Ab Tshf Working height: adjustable via PLC MACHINE DETAILS Control: PLC EQUIPMENT Adjustable panel support guide Side roller conveyor with idler rollers for panel support Rectifier group Roller holder plate Gluing unit for EVA adhesive with premelter Edge pressing group Trimming group Scribing group with overlapping motors Tiltable copy unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush group

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm Chjdpfx Aex Dcn Neb Tjf - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with sanding unit for wooden, veneer, PVC, melamine, ABS edges – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchens, bathroom furniture, and various other applications Technical specifications: Min./max. panel height: 8–60 mm Panel height with corner rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness from coil: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Pressure beam with motorized vertical movement Codpfx Abexnvr Ae Tehf Panel support rail Sound-insulated safety enclosure Fluid inlets Components: Anti-adhesive spraying unit with two nozzles – two tanks for anti-adhesion liquid Pre-milling units with two high-frequency motors – H64 mm diamond tools – diameter 100 mm, bore 30 mm, height 65 mm – copying set Gluing unit VC 560 for edge application on panels up to 60 mm – glue pot capacity: 1.5 kg – exchangeable glue pot End trimming unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, diameter 115 mm – front copying devices Tilting trimming/bevelling unit for removing top and bottom edge overhang – 2 motors at 0.55 kW – 12,000 rpm – tilt range from 0° to 25° – two-position pneumatic set for quick change between thin or radius edges Corner rounding unit with two motors on prismatic guides – for rounding and trimming thin or thick edges – 2 motors at 0.55 kW – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edges with rotary copying and extraction hood, scrap collection cassette Glue scraping unit – removes glue residues from the lower and upper panel surfaces Buffing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg Recently serviced New diamond pre-millers New copying wheels...

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Chjdpfx Asxq Apgob Tof

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm Cjdpfowb Ha Tjx Ab Tshf – weight: 450 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 41,000 h, functionality: fully functional, SCM edge banding machine equipped with servomotors. In excellent condition, but we are switching to another brand... Codpfxsxy Ht Us Ab Tshf 12" touchscreen control panel Three spray stations (infeed, central, and polishing outfeed) Servo-driven adjustment of infeed fence Servo-driven adjustment of workpiece height DIA tools (60 mm height) on the pre-milling unit SGP-E glue pot with upper guide End trimming unit with the possibility of R-edge trimming Milling unit with stepless adjustment of R1/R2 radius Scraper unit with stepless adjustment of R1/R2 radius Corner rounding unit with stepless control via the system The machine is still in operation Price negotiation possible...

Condition: used, Year of construction: 2017, machine/vehicle number: MR005128, Lightly used edge banding machine with gluing unit, end trimming unit, and flush trimming unit. Suitable for edge banding up to 2 mm thickness and panels up to 50 mm thick. Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 2 mm - Minimum panel thickness: 12 mm - Maximum panel thickness: 50 mm - Minimum panel length: 180 mm - Minimum panel width: 65 mm - Feed speed: 6 m/min - Glue reservoir capacity: 0.5 kg - Pre-milling unit: No - End trimming unit: Guillotine knife - Serial number: KK /138932 Cjdpfx Asxxx Dieb Tshf

Condition: new, feed rate X-axis: 7 m/min, workpiece height (max.): 50 mm, type of input current: three-phase, input voltage: 400 V, With corner copying, suitable for plastic edges from 0.4 - 3 mm, solid wood edges up to 3 mm, and workpieces from 8 - 50 mm, with pneumatic adjustment. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Premium equipment for high productivity with minimal space requirements! Intuitive operation with eye-S control and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to the processing program; error diagnosis for quick resolution of simple faults; statistics on processing parameters; USB connection; network connectivity ready; prepared for Industry 4.0 with API REST data transfer protocol. Outstanding accessibility to work units thanks to the large hood, which also provides protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Chjdpfx Aboxxvans Tef Automatic unit positioning when changing panel thickness Cut-off saw unit with corner rounding (me 35 tr s): for trimming the edge and rounding corners on the top and bottom; for edging solid wood, trimming is done with the radius milling cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Adjustment of infeed fence via spacer plates Dimensions and Weights Length (product) approx. 3314mm Width/depth (product) approx. 1085mm Height (product) approx. 1300mm Weight (net) approx. 623kg Flush radius milling unit Rated output: 2 x 0.35kW Cutter diameter: HW55.3mm Spindle speed: 12000min⁻¹ Extraction port diameter: 60mm Number of extraction ports: 2 Corner copying unit Rated output: 0.35kW Tool diameter: 58mm Speed: 12000min⁻¹ Electrical data Connection voltage: 400V Mains frequency: 50Hz Glue unit Glue pot rated output: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5bar Air consumption: 470l/min Feed Feed rated output: 0.55kW Feed speed: 7m/min Edges Edge thickness (coil material): 0.4 – 3.0mm Pre-milling unit Extraction port diameter: 2 x 80mm Rated output: 3kW Cutter speed: 7200min⁻¹ Diamond cutter diameter: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Rated output: 2 x 0.14kW Speed: 2800min⁻¹ Workpiece Workpiece thickness: 8 – 50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Codpfx Aoq A Tyzjb Tohf Availability: Immediately Location: Austria Condition: Like new Year of manufacture: 2023 GENERAL DESCRIPTION: A complete and versatile edgebander for small and medium-sized enterprises, capable of processing a wide range of materials to high quality standards in a compact footprint. The SCM Olympic 500 features electronic adjustment devices and allows for the processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the human-machine interface (HMI) • Maestro connect: Prepared for later installation without gateway • Dual-radius processing, beveling on all units with multi-blade tooling: - Fine-trimming and radius scraper unit, radius = 1 mm - Fine-trimming and radius scraper unit, radius = 2 mm • Electronically positioned pressure beam OPTIONAL EQUIPMENT: Workpiece spacer at infeed KIT “SAV€NERGY” Cabin and edgebanding area internal lighting “Nesting” tracing roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing milling unit “RT-V1” “EASY SIZE” device – electronic quick adjustment for jointing milling unit Glue pot “VC-VM” Ceramic infrared lamp for workpiece preheating Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ – automatic changeover between straight/radius/radius positions for “Round 2-A Multiedge 1R” unit Radius scraper unit “RAS-HP Multiedge 2R” Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Chodpfow Aig Sex Ab Tjf

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Cjdpfx Asnwkbceb Tshf Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Weight 2000 kg Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Edge thickness: 0.4mm - 6mm - Flush trimming unit - Snipping unit - Surface scraper - Rounding unit Codpfxehf Acls Ab Tehf all data without guarantee, sale only to commercial customers. Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany)

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers Codpswkf Ihofx Ab Tshf - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 3,774 mm, edge thickness (max.): 3 mm, overall weight: 842 kg, plate height: 50 mm, For plastic edges from 0.4 - 3 mm, solid wood edges up to 5 mm, and workpieces from 8 - 50 mm. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Scraper: Yes Buffing unit: Yes Top configuration for high productivity in a compact footprint! Intuitive operation with the eye-S control and 10” large touchscreen: HMI Maestro Active Edge Graphic display of all processing units and their operating status Graphical simulation of machining operations Control of all processing units Regulation of glue pot temperature Assistance functions for machine setup according to the machining program Error diagnostics for rapid troubleshooting of simple issues Statistics on machining parameters USB port Prepared for network connection Excellent accessibility to working units thanks to the large hood, ensuring protection and noise reduction Automatic positioning of units when changing panel thickness Panel feed via chain conveyor with rubber slip shoes Quality made in Italy Equipment details 10" touchscreen control panel Optimum machine management with the new 10" touchscreen control panel featuring Maestro Active Edge, visually representing all machine functions Pre-milling unit Two diamond-tipped cutters Glue station Glue is quickly and evenly heated by heating rods located in both the glue pot and the glue application roller Automatic temperature reduction during prolonged machine idle times Teflon-coated glue pot for easy glue changes Device for reusing unused glue Automatic application of edge banding from coils with cut-off knife for edges up to 3 mm Rotary table with Ø 730 mm Self-lubrication of the glue pot Quick-change kit for the glue pot Chsdpfxjxxuvbe Ab Tof Flush/radius milling unit With horizontal and vertical tracing rollers for optimal tool positioning Equipped with combination milling tool Ø 55.3 mm for flush milling of edges up to 5 mm and radius edges up to 2 mm Precise adjustment via 2 digital displays With chip extraction Surface scraper Absolute cleanliness for perfect finishing of the workpiece surface With rotating copying device Buffing unit Powered by two independently swiveling and height-adjustable motors For perfect cleaning and polishing of panel edges Profile scraper With digital position display For perfect finishing of plastic edges With device to retract the unit when it is not needed Edge magazine For automatic application of strip edges Solid wood strip edges are automatically loaded and synchronized with the panel feed

Condition: excellent (used), Year of construction: 2022, Used edge banding machine Chodpfx Aboxhc Eve Tef - OLIMPIC K 360 R - Year of manufacture: 2022 - Available from November 2025 - additional photos/video available

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical specifications: Gluing max. 8-55 mm Including rotating control panel Dual-motor HF joining unit Chjdpsw Nadgefx Ab Tjf Including replaceable, Teflon-coated rapid heating tank Including electronically controlled positioning of the pressure rollers Including pivoting double cross-cut saw unit Including flush trimming unit Including application-controlled bevel, radius, and corner rounding unit with nesting package Including radius scraper with nesting package Including flat scraper Including grooving unit Including buffing unit Including spray unit Location: Hesse Availability: Upon request !Sold on behalf of customers!

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine SCM K130, year 2009. Chedpfx Aot Ir Tpob Tof Configuration: Edge banding EVA glue End cutting saws pneumatic adjustable 0-15° Tilting radius milling pneumatic controllable Free space for further aggregates Very good condition, fully working. Including CE and full documentation.

Condition: used, SCM Selecta C edge banding machine Edge banding height 10-60 mm Cedoddn Svspfx Ab Tshf edge banding thickness 0,4-25 mm Caps Overlapping edgebanding bevels - 25 mm for solid wood Pivoting edgebanding unit for foil and ABS edges Radius scraper chamfering Buffing unit Space requirement Length 6345 Height 1530 Depth 1106 mm scm_selecta (1)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) Chodpfxsl Hydms Ab Tof EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, overall weight: 915 kg, type of input current: three-phase, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, Worktable dimensions 3465x710mm, height 875mm Gluing thickness roller edges 0.4 - 3mm Glue-on thickness strip edges up to 5mm, min - max. workpiece thickness 8-50mm min. Workpiece length/width with roller edges 190/110mm min. Length of panel 120mm Feed speed 9 m/min Feed motor 0.55 kW Working air pressure of pneumatics 6.5 bar Suction hood glue container 80mm 2 suction hoods Flush trimming unit 60mm 2 extraction hoods Pre-milling unit 80mm Working temperature 20-190C° Equipment: Pre-milling unit (jointing) Rounding unit (corner copying) Gluing unit, applying and pressing on the edge (self-lubricating glue pot) Trimming unit, for cutting off 90° of the protruding edge at the front and rear Flush trimming unit (joining) Chodpfxjuacqzs Ab Tsf Scraper unit Buffing unit Surface scraper Automatic application of the strip edges with edge magazine Kit for quick change of the glue container Device for heating the panel edge Non-stick agent spraying unit Spraying unit for finishing the edge

Condition: excellent (used), SCM contura in excellent condition Chsdpfxot E T I No Ab Tsf

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm Cjdpjc S Di Refx Ab Tehf brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 0.55 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material 0.5 - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal 0.5 / 1 / 1,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Cedpfx Abevwfmls Tshf

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) option: mm 20 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 250 / 3000 (ca.) Adjustable feeding speed (m/min) 12 - 40 m/min (ca.) Safety sound-proof enclosures/cabins Distance (center-axes) of Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4 (ca.)) Hogging Units (2 x Kw 5,8 (ca.)) Milling-Shaping unit 1 x Kw 4 (ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) Edge coils support (No 2 reels) + Band Pressure zone Snipping (end-cutting) unit (2 x Kw 0,35) ca. Rough Trimming unit (2 x Kw 1) ca. Cedpfx Aok Nk R Dsb Tehf Fine Trimming unit (2 x Kw 0,5 ca.) 0°-30° Multi Function Unit (Profile contour Trimming unit) with 2 revolvers (8+8 folds) - max 27 m/min Milling grooving unit 1 x Kw 4 (ca.) (0° - 90°) Profile Scraping unit + Glue scraping unit + Buffing unit

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Chedpfx Aowhi Slob Tef Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5