Used dividing heads for sale (132)

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Admission -Drawing with the photos Hfedob Hd Ugjpfx Aa Eei -Dimensions: 250/122/H155 mm -Weight: 9.5 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Hfsdpfxjd Efz Se Aa Eei -Tip height: 90 mm -Admission: -Drawing: in the photos -Dimensions: 140/135/H160 mm -Weight: 4.7 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 89 mm Hsdpfx Aob Hbx Uja Eofi -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 220/110/H110 mm -Weight: 5 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock comes: from a lathe -Tip height: 180 mm -Recording: MK4 -Dimensions: 540/250/H310 mm -Weight: 65.5 kg Hjdpfxod Inw Hs Aa Ejfi

Condition: used, Dividing head, dividing head, rotary table, rotary table Hjdpecht Uvsfx Aa Esfi -with translation: 1:40 -Admission inside: MK4 -Tip height: 165 mm -swiveling -Dimensions: 600/500/H300 mm -Weight: 84 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine Hfedpjd Ar Uxjfx Aa Esi -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Round table: swiveling, with four-jaw chuck Hsdpjhinzhjfx Aa Eofi -Four-jaw chuck: Ø 190 mm -Bore center: Ø 54 mm -Base plate: Ø 205 mm -Dimensions: 420/410 / H395 mm -Weight: 70 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Hsdped Hvhrefx Aa Eefi -Bores for guide: Ø 30 mm -Dimensions: 170/200/H110 mm -Weight: 4 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm Hfsdpfodzzg Sjx Aa Eji -Weight: 28 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 120 mm Hfodpfxod Ebpks Aa Eji -Admission: -Drawing: in the photos -Dimensions: 200/70/H130 mm -Weight: 4 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Hfsdpjd Nn Ifefx Aa Eei -Tip height: 185 mm -Dimensions: 235/120/H170 mm -Weight: 32 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Hedpfxed N Apqs Aa Esfi -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 135 mm -Admission: -Dimensions: 165/300/H190 mm -Weight: 8 kg Hfodoc Ih Swspfx Aa Eji

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Hjdpshikzlefx Aa Eofi -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Recording: MK5 -Tip height: 145 mm -Part head: swiveling -Dimensions: 250/230/H300 mm -Weight: 23 kg Hsdpjd Ar U Eefx Aa Eofi

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 -Dimensions: 275/260/H265 mm -Weight: 23 kg Hfjdpfx Aajd D Nfgj Eei

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Hjdod N Apnspfx Aa Eofi -Tip height: 155 mm -Dimensions: 100/120/H182 mm -Weight: 5.5 kg

Condition: good (used), Dividing head Brand: presumably WMW Hjdpewy Hlgjfx Aa Esfi Spindle taper: MK 3 – drawbar required Indexing plate diameter: 170 mm Hole division: 15 7 16 7 17 / 18 / 19 / 21 / 23 / 27 Mounting surface: 235 x 185 mm Accessories: Dimensions: 340 x 280 x 350 mm Weight dividing head: 39 kg

Condition: good (used), Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder Accessories: for tool grinding machine -Recording: MK5 -Peak height: mm -swivel/rotatable/cross table -Dimensions: 400/350/H260 mm -Weight: 36 kg Hfjdpob E Aquofx Aa Eoi

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Hsdpfxobatame Aa Eofi Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: Hodpfx Aajd Erdrs Esfi 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: excellent (used), Dividing Head / Quick Divider Manufacturer: Unispa 24-degree direct division 1-degree increments with handwheel Center height: 135 mm (28604) Stock number Length: 470 mm Depth: 300 mm Height: 260 mm Hedsv S Ar Ispfx Aa Eefi Weight: 60 kg

Condition: used, / weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Hfodpfx Aezcq Hxja Eoi Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg NEIGHBOR

Condition: used, / weight 140 kg dimension Length: about 430mm Width: approx. 530mm Hodpfx Aaszcq Hle Ejfi Height: about 370mm Weight: 140kg

Condition: excellent (used), Item description: HOFMANN RW/NC-220/320L, 4th axis ----- Item condition: Good used condition. Removed from a Matec machine. Internal number: 26.368 Hfodpfxsy S Tzrj Aa Esi