Round table

Arowa Typ 190

Condition: used, Year of construction: 1996, machine/vehicle number: xxxx, Lg.no. 24265 Technical data: - Shaft holder 35 mm - Shaft groove length 90 mm - Drive speed 1450 rpm - Drive 400 V / 4.4 kW Lrsdpfxstx Ubrs Ab Aeu - Space requirement approx. W 1300 x H 2500 x D 800 mm - Weight approx. 200 kg

Condition: reconditioned (used), Steel grinding machine Manufacturer: REMA Lrjdpfx Ashvu Tmjb Aeu Model: DS 07/ST Version with reversible motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Serial no.: 022857 Equipment: - Reversing switch for right/left rotation - Benchtop version with chip tray - Wet grinding system - 2 pcs. support table ATS (left) adjustable from -5° to +15° and with spring suspension - 2 pcs. angle stops - Adjustable support table ATK (right) for grinding chip guide steps - Steel holder for support table ATK 360° rotatable, pivotable, with height adjustment and knurled screw for adjusting the chip depth - Enlarged protective cover (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - Protective cover (right) for grinding wheels Ø 125 mm with mounting flange - Operating manual Used, as is, no guarantee

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Lrjdped I R E Nefx Ab Aou Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, machine/vehicle number: 053051, grinding area: 200 x 25 mm electrical connection: 380 V, 0,5 kW space needed: 550 x 450 x 1100 mm Lrjdpfx Aobfp Ixob Aeu weight: 95 kg

Condition: good (used), Tailstock Taper size: MK 2 Quill travel: 30 mm Height-adjustable Center height of 250 - 285 mm Tiltable from -5 degrees to +15 degrees Base area: 230 x 155 mm Weight: 27 kg Lredpsdlp Txofx Ab Asu

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Lredjzka H Aopfx Ab Aju

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Weight approx. 22 tons Ljdpjv Hx R Nsfx Ab Ajru Video of the machine in operation available!

Condition: new, Hydraulic workshop press, LFSS, type DPM 1070/100 Technical specifications: Pressure: 100 t Lrjdpfjgipilox Ab Asu Stroke: 300 mm Table area: 1070 x 260 mm Distance between guide columns: 1070 mm Approach speed: 8.0 mm/sec Working speed: 5.0 mm/sec Retraction speed: 10.0 mm/sec Motor power: 5.5 kW Machine weight: approx. 1400 kg Space required: approx. 2110 x 1000 x 2290 mm Equipment: Hydraulic workshop press Table height adjustment V-block tool insert Pressure gauge

Condition: new, diameter 200 mm height 105/265 mm centre height 105 mm weight of the machine ca. 41 kg dimensions of the machine ca. 400 x 330 x 310 m Lrsdpsupxd Rsfx Ab Aou

Condition: new, Maximum turning height: 250 mm Turning diameter over slide: 350 mm Turning diameter in the curve: 695 mm Lrjdpfxsgt E Ils Ab Aju Distance between centers: 1500 mm Spindle nose: DIN 55029, cam lock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions L x W x H, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker's precision - Stepless speed control (3 pre-selected stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed drive with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication system - Removable bridge - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - Frequency inverter - Machine stand with a high splash guard and integrated lighting - Chip tray that can be pulled out to the front - 3-jaw chuck - Fixed steady rest - Traveling steady rest - Micrometer bed stop - Oil cooler - Two emergency stop push buttons and a foot pedal with an electrical braking system - End-switch protected chuck guard, tool holder guard, and cover for the lead and feed screw according to European safety standards CE - Coolant system - Fixed center - Reduction sleeve for the main spindle - Operating tools in a toolbox