Used Tailstock for sale (1,612)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: P018, spindle bore: 105 mm, total length: 7,000 mm, total width: 1,000 mm, total height: 1,500 mm, overall weight: 5,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 26 A, nominal power (apparent): 15 kVA, DMTG DALIAN CW 6163 E: Guide and lead screw lathe - Machine year of manufacture: probably 2018 - Distance between centers: 4000 mm - Center height above bed: approx. 315 mm Gsdpfx Aez Rwz Nekyekc - Turning diameter above bed: approx. 630 mm - Center height above carriage: approx. 180 mm - Turning diameter above carriage: approx. 360 mm The machine is equipped with a tailstock, a Multifix clamping system, and a three-jaw chuck, diameter: 300 mm, including two steady rests. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: K0218, spindle bore: 105 mm, total length: 8,000 mm, total width: 1,500 mm, total height: 1,500 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 13 rpm, overall weight: 6,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 26 A, nominal power (apparent): 15 kVA, DMTG DALIAN CW 6163 E: Guide-way and lead screw lathe - Machine year of manufacture: presumably 2018 - Distance between centers: 5000 mm - Distance between centers above the bed: approx. 350 mm Gkjdez Rwlzopfx Akyec - Swing over bed: approx. 700 mm - Distance between centers above the carriage: approx. 250 mm - Swing over carriage: approx. 500 mm The machine is equipped with a tailstock, a Multifix clamping system, and a three-jaw chuck, diameter: 300 mm, including two steady rests. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Condition: good (used), overall weight: 300 kg, Hofmann RWNC-300 CNC dividing head / A-axis, including tailstock GHL 4/300 For sale is a robust and highly precise CNC dividing head (A-axis) from Hofmann Mess- und Teiltechnik (Werkzeugsysteme Müller GmbH), including a matching tailstock. This system is ideal for expanding milling machines and machining centers for multi-axis machining. Technical data & equipment details: Gkodpfx Aez Iv Easkyec Manufacturer: Hofmann Mess- und Teiltechnik (Werkzeugsysteme Müller GmbH) Type of dividing head: RWNC-300 Factory number dividing head: 11281 (Hofmann ID No.: 1170-0500-241) Weight dividing head: 300 kg Type of tailstock: GHL 4/300 Factory number tailstock: 1109 (Hofmann ID No.: 1270-0400-010) Weight tailstock: 85 kg Equipment: Includes a solid counter support (tailstock) with centering point, as well as the associated connection cables and lines. Matching keys/fastening screws are included. Logistics: No shipping. Collection only (delivery terms: EXW Leipzig).

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,700 h, functionality: fully functional, turning diameter over cross slide: 400 mm, turning diameter: 400 mm, travel distance X-axis: 250 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 3,000 rpm, total height: 1,950 mm, total length: 3,600 mm, total width: 1,880 mm, quill diameter: 70 mm, quill stroke: 500 mm, overall weight: 5,900 kg, Equipment: rotational speed infinitely variable, Angelini DG 13 lathe Gkodezzzu Ajpfx Akyjc Control: Fanuc OT/C Year of manufacture: 1998 Spindle speed: 3,000 rpm Drive power: 18.5 kW Travel: Z-axis: 800 mm X-axis: 250 mm Tailstock diameter: 70 mm Hydraulic tailstock stroke: 500 mm Center height: 250 mm Distance between centers: 800 mm Max. turning diameter: 400 mm 1 chip conveyor Tool turret: 12 stations with driven tools VDI40 C-axis enables 3D interpolation turning with face and cylindrical surface machining Optional with driven tools. Documentation and export available for an additional charge. Inspection possible while the machine is powered on. We will gladly send you further details or arrange an on-site inspection.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches Gkedjz Nv H Uepfx Akyec - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: excellent (used), Year of construction: 2015, operating hours: 55,000 h, functionality: fully functional, Equipment: documentation/manual, Type: CNC turning center Manufacturer: INDEX Model: C200 Year of manufacture: 2015 - Number of spindles: 2 - Number of axes: 10 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: AD140 - Spindle drive power: 25 / 33 [kW] - Spindle speed: 5,000 [rpm] - Max. bar diameter: 65 [mm] - Max. diameter of the main spindle chuck: 160 [mm] - Minimum C-axis resolution: 0.001 [degrees] TAILSTOCK SPINDLE Gsdpfx Ajz R Ad Aokyjkc - Spindle nose: AD140 - Spindle drive power: 25 / 33 [kW] - Spindle speed: 5,000 [rpm] - Max. bar diameter: 65 [mm] - Max. machining diameter: 160 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel: 700 [mm] - Rapid traverse speed: 50 [m/min] - Distance between spindle / tailstock spindle: 710 [mm] LEFT UPPER TURRET - Number of positions: 14 - Number of motorized positions: 14 - Travel X/Z: 110 / 320 [mm] - Travel Y: 100 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 6.5 [kW] RIGHT UPPER TURRET - Number of positions: 14 - Number of motorized positions: 14 - Travel X: 180 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 6.5 [kW] LEFT LOWER TURRET - Number of positions: 14 - Number of motorized positions: 14 - Travel X/Z: 110 / 550 [mm] - Travel Y: 100 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 6.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 64 [kVA] WEIGHT AND DIMENSIONS - Footprint: 6,618 x 1,794 [mm] - Machine height: 2,139 [mm] - Machine weight: 9,000 [kg] MACHINE HOURS - Power-on hours: 59,431 [hours] - Spindle hours: 29,663 [hours] ACCESSORIES - Control: C200-4D (SIEMENS 840D) - Interface: Ethernet / USB - 3-color status indicator - Options: Transmit / Tracyl - Tool breakage detection - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Spindle cooling - Internal coolant supply (ICS): on all turrets - Chip conveyor - Part removal - Part belt conveyor - Bar feeder: INDEX MBL capacity 3,000 [mm] - Collet chuck: 2 HAINBUCH Spanntop Kombi Axfix Ø65 This offer is subject to change and is non-binding. Modifications, errors and prior sale are reserved.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from vocational school / technical college - identification -Guides in good condition -Technical college identification -Good working condition -Maximum turning height 180mm -Maximum turning diameter 1000mm -Bar capacity 56mm -Speed range (gearbox) 56 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Tailstock MK4 -Three-jaw chuck approx. 200mm -ELECTRIC CHUCK GUARD -SPINDLE COVERS -2 x Emergency stop -Multifix base and inserts -Coolant system -Chip guard -Work light Gkodpez R Dn Aofx Akyoc -Documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500kg Errors and omissions excepted.

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Gkodpfx Akoz Ng I Aeyoc Mount according to DIN 228: MK5 Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE Gkedpfx Akez Rnwbsyjc 170 MM HYD 3 JAW CHUCK MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER PARTS CATCHER BARFEED

Condition: ready for operation (used), Year of construction: 2008, operating hours: 32,110 h, functionality: fully functional, machine/vehicle number: 027.0500, workpiece weight (max.): 80 kg, total width: 2,200 mm, total length: 2,700 mm, total height: 1,800 mm, distance between centers: 600 mm, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 600 mm, input frequency: 50 Hz, input voltage: 380 V, space requirement height: 170 mm, tailstock quill stroke: 70 mm, Equipment: CE marking, Universal CNC Grinding Machine for Sale - Type: STUDER S33, Series 75 - Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: - Table tilt: +8.5° - X-axis travel: 285 mm - B-axis travel: 800 mm - Grinding angle adjustment: -15° to +195° (1° increments) - Grinding wheel: 500x63 mm, 50 m/s - Distance between centers: 600 mm (max. load 80 kg) - Collets: B32 Gkjdpfx Akoz Iybfeysc - Tailstock quill travel: 63 mm - Tailstock fine adjustment: 0.04 mm - Control unit: FANUC 21-TB, 10.4" - Memory: 64 KB - Coolant tank: 375 L with automatic paper filter feed ADDITIONAL EQUIPMENT: - Steady rest: ARBOTECH – GR – 055V - MARPOSS device: UNIMAR S30 - MARPOSS device: P4 - Grinding wheel balancing system: MPM The S33 grinding machine is equipped with a MARPOSS device for fast and precise workpiece measurement, an ARBOTECH auxiliary device for grinding workpieces in a single setup, and a grinding wheel balancing system. The machine has undergone regular annual servicing by the manufacturer, STUDER. It is highly precise and in excellent condition. It was used for toolmaking production runs of up to 50 pieces. It is connected to the power supply and ready for operation.

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 1,011 mm, turning diameter: 658 mm, spindle bore: 102 mm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,077 mm, rotational speed (max.): 3,300 rpm, rotational speed (min.): 50 rpm, bar passage: 102 mm, total height: 2,720 mm, total length: 6,585 mm, total width: 2,800 mm, overall weight: 13,400 kg, We are pleased to offer this Mazak Integrex i-400 x 1000 multitasking CNC machine, manufactured in 2011 and equipped with Mazatrol Matrix control. A versatile machine combining turning and milling operations in a single setup, ideal for precision machining and complex (bigger) components. Technical specifications: Turning diameter: 658 mm Max. turning length: 1011 mm Bar capacity: 102 mm Travel on X-axis: 615 mm Travel on Y-axis: 250 mm Travel on Z-axis: 1.077 mm B-axis travel: -120/+120° Main and spindle: 50 - 3300 1/min. Gksdpfxjz Rt Dto Akyjc B-axis index increments: 0,0001° C-axis indexing of spindle: 0.0001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 36 tool positions NC Tailstock: MK5 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Driven Tools No Gsdpoz Rxg Hefx Akyekc

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Godpswvgbyofx Akyokc Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC control Haas C-axis driven tools 12-fold revolver hydraulic 3-jaw chuck Gksdpfxsz Rk Tro Akyoc Tool Eye chip conveyor coolant device without tailstock Technische Daten / technical details: max. Drehlänge / max. turning lenght 660 mm max. Drehdurchmesser / max. turning diameter 533 mm Umlaufdurchmesser über Bett / rotary diameter over bed 806 mm Drehzahl Spindel / spindle speed 3400 UpM /rpm Anzahl Revolverwerkzeugplätze / number of places in revolver 12 fach /fold Eilgang Z, X / rapid feed Z, X 24 m/min Antriebsleistung Spindel / drive capacity spindle 22,4 kW Gewicht der Maschine ca. / weight ca. 4100 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds Godpoz Izi Dofx Akyokc - Threading / Metric / Inch etc. - 3-jaw chuck - Tailstock - Chip guard - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1989, functionality: fully functional, The machine comes from a training center. Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Godszrt Rkepfx Akyokc Equipment: 3-axis active digital readout made by Heidenhain Infinitely variable feeds and rapid traverse in all 3 axes Fixed angle table Coolant equipment Tailstock with counter bearing Several toolholders

Condition: good (used), Year of construction: 2007, functionality: fully functional, Turning machine, cycle-controlled, Weiler E70: - Turning length / center distance 2000 mm - Swing diameter over bed 720 mm Gedpfx Akez R Dlnoyskc - Swing diameter over cross slide 430 mm - Spindle head A11 - Spindle bore in front bearing 150 mm, spindle bore 106 mm - Drive power 37/30 kW - Max. torque 3150 Nm - Speed 1-1800 rpm - Tailstock quill diameter 115 mm, stroke 225 mm, MK6 - Weight 5400 kg Reinforced coolant pump Knoll chip conveyor with 700 liter clean water tank and compact filter SAUTER 8-station turret with cylindrical shank holder DIN 69880-40 SIEMENS 810D and Weiler D3 software

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Gksdsz Rnrrepfx Akyec Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Gksdpfx Ajz Irwfjkyjc Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website.

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Gsdpfxez R D Hle Akyskc Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 Year of manufacture: 2004 Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Main spindle power: 28 / 22 kW (40/100 % duty cycle) Main spindle torque: 180 / 140 Nm Counter spindle: Yes, same power Gkjdpfx Aezl Dvkskyec X-axis: 220 mm Z-axis: 320 mm Y-axis: ±30 mm Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Machine weight: approx. 5,300 kg Connected power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor, Bürener type SPE 63/30-250 Z60 Tool monitoring system, Artis type CTM Tailstock mounted on counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece extraction device Workpieces can be automatically unloaded from both the main and counter spindles Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine, IRCO type SiMag 42

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Gkodpfx Ajz Rqmrekyoc Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg.

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Gksdpfx Akjz Ibaioyoc Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: good (used), Year of construction: 1995, functionality: fully functional, Schaublin 125-CCN High-precision lathe with numerical control FANUC 20-T. A LARGE AMOUNT of accessories included. CE compliant!!!! Technical data: >> Machine no. 334949, year of manufacture 1995 Working area: Permissible diameter: over the carriage 270 mm over the slide 115 mm in the spindle bore 28 mm largest chuck 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X/Z axis, stepless 0-5000 mm/min Rapid traverse X/Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Gsdpoz Ezc Eefx Akyokc Accessories: 1 pallet, see photo About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with numerical control FANUC 20-T. The machine was manufactured in 1995 and comes with a large amount of accessories. Take advantage of the opportunity to inspect this machine on site while it is powered up and to verify its condition.

Condition: ready for operation (used), Year of construction: 1985, Available immediately from our location: L & Z lathe LEGOOR Godpfxjz I Ih Tj Akyokc Type 300 Year of manufacture 1985 Center height 300 mm Diameter over bed 620 mm Diameter over carriage 390 mm Diameter in the gap 850 mm Spindle bore 104 mm Tailstock, Morse 5 Tailstock quill travel 275 mm Spindle speeds 20 – 1500 rpm Thread cutting without gear changes Drive power 15 hp Weight 3.5 tons Several chucks Faceplate 2 centers Multifix steel tool holder with inserts Price: Euro 4,750.00 plus VAT, ex works.