Used Dmc 60 U for sale (28)

Condition: used, Year of construction: 2008, working width: 1,350 mm, power: 85 kW (115.57 HP), roller diameter: 250 mm, TECHNICAL DETAILS Working width: max. 1,350 mm Number of processing units: 4 Feed motor power: 5.5 kW Sanding unit 1 Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 2 Roller diameter: 250 mm Motor power: 18.5 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Sanding unit 3 Roller diameter: 250 mm Motor power: 15 kW Speed: 2,905 rpm Sanding belt width: approx. 1,350 mm Sanding unit 4 Roller diameter: 320 mm Motor power: 15 kW Speed: 2,930 rpm Sanding belt width: approx. 1,350 mm Dwodpfxo Aihpao Alfjd MACHINE DETAILS Installed total power: 85 kW EQUIPMENT Calibrating, sanding, and finishing machine Work table with fixed height for line operation NC-controlled feed speed regulation Sanding unit with steel roller Sanding units with rubber rollers Touchscreen control CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8401

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 550 mm Dedpfe Adchyjx Alfjwd z-travel 500 mm control TNC 426 table-size 900 x 550 mm taper ISO SK 40 speeds 18000 U/min total power requirement 50 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,3 x 2,43 x 2,98 m DECKEL MAHO DMC 70 V Hi-dyn machining center featuring: 30-station tool changer Chip conveyor Oil mist filtration system Transport dimensions: 650 x 243 x 297 cm, 8 tonnes

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine Dwodpszx R Dnofx Alfjd SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: excellent (used), Year of construction: 2003, For calibration of solid wood/hard wood In line machine ( Fixed table hight : 900 mm ) Max working width : 52 - 1350 mm Min working lenght : 400 mm Working hight : 4 - 170 mm ( Digital motorized up/down ) Infeed speed : 3 - 18 mtr/min Configuration : Dodpfx Alozuvy Hefswd 1 agg : Steel Roller/drum, 45 Kw 2 agg : Rubber roller/drum, 37 Kw (schore 85 ) 3 agg : Brush Extra new steel roller/drum + extra new rubber roller/drum included ( see pictures attached ) Extra 15 package of sanding paper included( brand new )

Condition: used, machine/vehicle number: 008654, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes Dsdpfx Alozpfbiofswd No. Operating units: 2 Nr sectioned swab: yes

Condition: used, Year of construction: 2004, machine/vehicle number: SA/005006, SECOND HAND WIDE BELT SANDER WITH 3 BELTS DMC MOD. UNISAND USK 1350 M3 - Steel roller - Rubber roller - Rubber roller - N. 3 indipendent motors - Working width 1350 mm - Device for short pieces - Touch screen control - S/N SA/005006 - Year 2004 - CE rules Djdpfswrnmpex Alfowd

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500 Dwedezp D Eaopfx Alfed

Condition: used, Year of construction: 2001, functionality: fully functional, DMC US 1350 M2 Wide Belt Sander, year 2001 for sale! Dwodpfx Ajx Ezwhjlfjd

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, TOP AND BOTTOM CALIBRATING LINE DMC MOD. UNISAND 2000–1350 – CE RULES Bottom machine: - Vacuum lifting device for conveyor belt - N. 2 bottom sanding belts Dsdjywgqkspfx Alfjwd - Steel roller - Rubber roller - Brush - On/off devices - Blowers - Shoe pressers - Working width 1350 mm - Year 2000 - Complete with manual and CE declaration Top machine: - N. 3 top sanding belts - Steel roller - Rubber roller - Pad - Brush - On/off devices - Blowers - Shoe pressers - Vacuum device - Year 2000

Condition: used, Year of construction: 2001, functionality: fully functional, Manufacturer DMC Model E 110 RP Dwsdpjxwwk Eofx Alfed Year 2001

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Dsdpfx Aljx Dm Tvofswd Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Dwedjtwzyfopfx Alfsd Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Dwsdsrbyrpspfx Alfod Stock no: 2001933

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore Dodpogr Er Sefx Alfjwd diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm The machine is in good condition and fully functional Dwsdet I Tplepfx Alfod Technical data Commissioning: 2001 Control: Heidenhain TNC 430 i Table size: 850x600 mm Tool holder: SK 40 Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Dwedeitvkuepfx Alfjd Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: used, Year of construction: 2018, turning diameter over cross slide: 525 mm, turning length: 1,255 mm, turning diameter: 520 mm, travel distance X-axis: 305 mm, travel distance Z-axis: 1,305 mm, rotational speed (max.): 2,500 rpm, overall weight: 8,600 kg, DL-35M motorized turret, FANUC Series Oi-TF control Workholding fixtures and tools not included AVAILABLE: late January/early February 2027 Dwodjz Sqwtjpfx Alfod

Condition: used, Year of construction: 2013, BAZ DMC 635V ecoline, year of manufacture 2013. Dedpfjz Tf Ehox Alfjwd

Condition: used, Year of construction: 2009, BAZ cover for Maho DMC63V, year of manufacture 2009 Dwedpfxsw D Sp Eo Alfed (includes new milling spindle + Y-axis spindle) Heidenhain control BAZ DMC 63 V, year of manufacture 2001

Condition: used, Year of construction: 2002, functionality: fully functional, grinding width: 1,100 mm, overall weight: 6,600 kg, type of input current: three-phase, The machine is in working condition. 2+2 level grinding is possible. Dwsdpfx Aoyybgrslfed

Condition: excellent (used), functionality: fully functional, CALIBRATING SANDING machine with 3 belts model DMC TECHNOSAND TC 1350 RRP second hand machine CE standard : YES machine with vacuum unit for table universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data: max. working width mm.1350 max. working height mm.150 min. working height mm.3 dimensions of abrasive belts mm.1380 x 2620 automatic centering composition machine ( 3 units , 3 independent motors ) : 1st unit : rubber roller diameter mm.240 - shore 85 . motor power Kw 18,5 automatic blowers for cleaning abrasive belts 2nd unit : rubber roller diameter mm.240 - shore 45 . motor 2 speeds power Kw 12 / 15 automatic blowers for cleaning abrasive belts 3rd unit : electronic segmented pad n.34 sectors . motor 2 speeds power Kw 8,8 / 11 automatic blowers for cleaning abrasive belts Dsdpfsyrrr Ujx Alfewd brake with automatic intervention input roller conveyor output roller conveyor weight kg 3850 volt. 380/50

Condition: excellent (used), DMC Topsand 2000 Calibrating and Sanding Machine 4 Belts First group: 1 roller Second group: 1 roller Third group: 1 electronically controlled sectional pad Dwodoi Dakropfx Alfjd Fourth group: 1 electronically controlled sectional pad for superfine finishing Usable width: 1350 Vacuum system on the belt

Condition: used, Year of construction: 2005, SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - Rubber roller - 18.5 kw - 90 sh - diam. 250 mm - Rubber roller - 15.0 kw - 70 sh - diam. 250 mm. Dwjdjmxggyspfx Alfed - Rubber roller - 11.1 kw - 40 sh - diam. 330 mm - N. 3 indipendent motors - Working width 1100 mm - Device for short pieces - Year 2005

Condition: used, machine/vehicle number: 008702, Max. machining width: 1350 mm Min. machining thickness: 3 mm Dwsdjzq Urgepfx Alfsd Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW - 4 upper 15 kW - 5 upper 11 kW Dwodpet Hmg Isfx Alfsd * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing