Used complete sawmills (stationary) for sale (124)

Year of construction: 1980, condition: used, Passage width: 560 mm Passage height: 560 mm Stroke: 600 mm Maximum speed: 320 1/min The gantry system is fully mechanized and equipped with a new Moehringer quick-feed system. Djdpfxscvhnds Akvskr

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Dkjdpsrmmqzefx Akvsr

Year of construction: 1984, condition: excellent (used), Frame saw with 600 stroke Dodpfxsfym Edj Akvjkr width 950 mm height 915 mm power 132 KW

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Dkedsui Ifcspfx Akver

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Dsdpfx Akjy Iuuxovjkr

Condition: good (used), Year of construction: 1971, Esterer frame saw with many spare parts and at least 40 new and used saw blades. The gang saw is in a good, ready to use condition with minimal bearing play. Djdpfx Ajncfiyekvekr After agreement the saw blade grinders can be sold with the saw.

Condition: used, Conveyor mechanization suitable for scanning systems. Dedpfoxpgmgex Akvokr Speed: up to 140 m/min. Manufacturer: Framtec (Sweden) Year: 2014

Condition: used, Year of construction: 2007, 4 profiling units VPF340 2x90 kW New subframe Dsdpfxey Adl Ns Akvekr LINCK centering system VZM LINCK extraction unit CSA

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Dkjdpfxjyr Dbus Akvjr Can also be dismantled at additional cost.

Condition: used, Year of construction: 2007, functionality: fully functional, cutting length (max.): 5 mm, overall weight: 3,000 kg, Includes: -Complete log sawmill -Log loading ramp -Roller track 6 meters It is in excellent condition and fully functional Dksdpfx Akov Stdbevor

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. Dkodeyyd Tnepfx Akvsr We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin Dkjdpfx Asvtwzmokvsr - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: used, Jonsored Chainsaw Mill EL-600, 9m cutting length, electric motor, 5.5 kW, 600 kg, maximum log diameter approx. 500 mm Dkjdox H Udwspfx Akvor Prices subject to change without notice; errors, misprints, and typographical mistakes excepted.

Condition: used, Mobile sawmill Logosol B1001, year of manufacture 2020, very good condition, 23 HP engine, hydraulic log leveling, XL log holder, trailer kit Dedpfxovr I Hqe Akvokr Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, machine/vehicle number: G-BBS124070P, Pilous CTR750EV log band saw, very good condition, new rails, 5.5 kW, 4100 mm band length, 460 kg Dkedpfx Aovw Ecgokvjr Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Pilous CTR750EV bandsaw, very good condition, 5.5 kW, S6 7.5 kW, 3.6 m cutting length, 460 kg Dkjdpfjwzzf Dox Akvsr Price changes reserved, errors, misprints, and typographical mistakes excepted.

Condition: used, machine/vehicle number: G-BBS112186P, Hydraulic log band saw Forestor CTR800H including the following accessories: 3m extension section, chain log turner, hydraulically rotatable log lifter, hydraulic log lifter with drive, saw band tensioning device, 11 kW motor, pre-cutting device, ammeter, saw band guide electrically adjustable, Dkedovw Eb Aspfx Akver LG Automat, irrigation pump with automatic switch-on Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Small sawmill CTR550, year 2018, good condition, 4 kW, 3600 mm cutting length. Price changes reserved, errors, misprints and typesetting mistakes reserved. Dodpfxowzzfqo Akvokr

Condition: used, Woodmizer EG300 Twin Blade Edger, year 2019, in good condition Technical data: Pass-through width: 550 mm Cutting height: 60 mm Minimum cutting width: 60 mm Maximum cutting width: 410 mm Width adjustment: Electric Minimum board length: 700 mm Saw blade diameter: 2 x 350 mm Motor: 15 kW Feed speed: Infinitely variable 0 to 25 m/min Machine length with tables: 4900 mm Machine width: 1630 mm Machine height: 1250 mm Working height: 900 mm Dodpfxsx H Uhis Akvekr Weight: 988 kg Price subject to change. Errors and misprints excepted.

Condition: used, Block bandsaw Pilous CTR520, good condition, cutting length 5.8 m, max. log diameter 550 mm, 4 kW S1, cutting length 3110 mm, weight 310 kg Dedpfx Ajwzzhrekvokr Price changes and errors, misprints and typographical mistakes reserved.

Condition: used, Year of construction: 2013, Block bandsaw CTR710M, year 2013, 12 m cutting length, incl. LG automatic feeder and scorer, 6 kW, 550 kg Dkjdpfx Akexlng Tjvjr

Condition: new, The new, ultra-modern, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many options for cutting your wood and logs correctly. Maximum cutting precision thanks to cutting thickness calculator, lower part galvanized, upper part powder-coated including pre-cutting device! For all types of wood, logs or old wood. Can be extended indefinitely with extension sections. Very stable thanks to solid welded frame. CE tested. The original!, not a replica!!! Technical data: max. log diameter 750 mm max. board width 620 mm motor output S6 7 kW (5.5 kW S1) motor output feed motor 0.37 kW max. feed speed 17 m/min cutting length 3.45 m (can be extended without limit) min. cutting length without aids 0.75 m saw band length 4140 mm saw band width up to 35 mm diameter of the band wheels 500 mm dimensions W x H x L 1980 x 1670 (1910) x 5300 mm band speed 13 m/sec weight 460 kg standard equipment: - electric feed, continuously adjustable - electronic speed display - electric height adjustment with electronic height display - cutting thickness calculator with automatic travel to the Dksdpfevrvigsx Akver specified height - special device for setting the exact wood thickness - 2 basic sections - 3 90° angle stops - 3 log clamping devices - Band tension indicator - Bimetal saw blade for all types of wood - Hydraulic band tension indicator - Irrigation valve Optional equipment - Extension section with angle stop and log clamping device extends the cutting length per piece by 2.25 m - 7.5 kW motor - Cover tarpaulin - Sharpening machine - Setting device - Log turning lever

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: Dodpfx Aovrvq Dskvokr CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Dodpfovrvqwex Akvskr Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)

Condition: as good as new (ex-display), Demonstration machine Robust band saw for logs up to 71 cm in diameter with extendable rail sections—extension is unlimited. Automatic feed with continuously variable speed. Electric height adjustment controlled from the operator panel. 3.8-inch touch LCD display for height adjustment. Saw unit suspended on both sides for increased stability and improved precision. CE certified. Technical data: Dkedevr I Rcepfx Akvor Max. log diameter: 71 cm Max. board width: 67 cm Motor output S1: 5.5 kW Cutting length, base version: 2.1 m Cutting length, extension section (optional): 3 m, 1 m Weight: 550 kg Extras not included in the price (sample image).