Complete sawmill (stationary)

Soderhamn Eriksson/ARI Vislanda 240-12

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW Dujdpfxjx Ap Hpj Aiwot -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Duedju Hmacepfx Aiwet Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 Dedpfx Aioqy Ek Aewsut - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: new, functionality: fully functional, Approximately 15-18 tons of batch bearings, completely new, unused, and in original packaging. Duedsywk T Nepfx Aiwet Brands include: SKF, FAG, Timken, NTN, BTC, N&R, APB, and more.

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Dusdpow Ug Agofx Aiwet

Condition: new, Year of construction: 2025, HIGH-PERFORMANCE WRAVOR BANDSAW, SPECIALLY DESIGNED FOR PRECISE AND EFFICIENT CUTTING OF LAMINATED BEAMS. IT ENSURES HIGH-QUALITY CUTS, MINIMAL MATERIAL LOSS, AND OPTIMAL PRODUCTIVITY. 📌 Key features: ✔ Precise cutting of laminated beams ✔ Automatic control for increased efficiency Duedevu Um Nspfx Aiwst ✔ Robust and reliable construction

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator Duodpfxotrd Hfe Aiwjt - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Dsdextxg Hopfx Aiwjut Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW Dsdpfxoq Nf Ens Aiwsut 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist.

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net Duedpjh Rabnjfx Aiwot INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.