Used complete sawmills (stationary) for sale (112)

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Bcjdpew E Ei Usfx Aafsu Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 25/111/615/18, Cutting line for medium-sized wood Circular sawmill - minimum log diameter: 120mm - maximum log diameter: 400mm - minimum log length: 1500mm - maximum log length: 3200mm - feed rate: 7.5-24m/min Bedevdtzqjpfx Aafjcu - power of main motors: 75+90 kW - saw diameter 600mm WP210 multi saw - maximum cutting height: 210mm - minimum cutting height: 30 mm - maximum cutting width: 500 mm - minimum cutting length: 1500 mm - feeding speed: 5-25 m/min - power of main electric motors: 2x75 kW - diameter of saws 350mm The line includes: PK2200 log feeder Prism roller conveyor TT5/600/400 G caterpillar circular sawmill Control panel Roller table with a mechanism for dropping offsets and side boards Powered roller table 4m SB4000 base roller table WP210 multi-sawing machine Conveyor belt L=25000 More information available at the indicated e-mail address or by phone. Possibility of line presentation from Monday to Friday 08:00-16:00

Condition: used, Complete sawmill, for now only for sale as a whole. Reservation for individual purchase possible at any time. Sawmill consisting of: 01. Log infeed 3-strand Mayrhofer with separator with inserter Total length: 8 meters Width: 3.5 meters 02. Fully hydraulic carriage Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Pini & Kay FN65 HH frame saw Bedpfxewptuyj Aafecu Passage width: 650 mm Drive motor: 33 kW With saw blades With suspension With intermediate gear With splitting wedge With scraper conveyor for sawdust 04. Frame roller table with 3 extractors and steep conveyor Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table 4-strand Length: 4.5 meters Width: 2 meters 06. Steep conveyor 4-strand Conveyor length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 0-line left Right-hand machine Drive motor: 22 kW With 2 under-table crosscut saws With hydraulic roller lifting With hydraulic width adjustment With sliver separator With extraction table/cross conveyor for slivers With elevator for main material With conveyor belt With spiral roller conveyor With manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpener Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Condition: good (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 141-8300, cutting length (max.): 7,000 mm, saw blade width: 100 mm, year of last overhaul: 2022, Zenz BN 110 S saw with mechanization 22 kW drive motor 7 m cutting length 5 vertical supports 2 tensioners (+ 2 supports) Log lifter 4 leveling devices with claws 1 log roller 1 pre-cutter 20 l water lubrication drum PLC control Seat mounted on armrests PLC on the left - joystick on the right Mechanization, built in 2022, consisting of: Hydraulic flap frame for removal from the saw with electrically driven roller conveyor Bjdpewhcwhsfx Aafjcu Roller conveyor with hydraulic ejectors 4 m roller conveyor All electrical and hydraulic elements can be operated from the operator's station. Zenz automatic sharpening machine, type AHB No. S-1012

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Hydraulic power unit: 4 kW Optional equipment: Bcjdpfxjwavqlj Aafou Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: excellent (used), Year of construction: 2021, Year of construction: 2021/2022 Space requirement for entire system: 10x32 meters Total connected load: approx. 350 kW Peak value: approx. 120 kW Average value: approx. 90 kW Personnel requirement: min. 2 people Cutting capacity: maximum 80-100 fm/8h Round log diameter: min. 10cm max. 100cm Round log lengths: min. 100cm max. 600cm Edging system: 3-stack variable / 120mm cutting height Due to a restructuring of the company, a new, complete band sawmill is for sale as follows: - Round log feeder - Block puller - Balz debarking machine BG 90 6W-GR - Steep conveyor with feeder Bsdevw Ry Dopfx Aafecu - Tension carriage ELCA Legno CRO 17 - Band saw ELCA Legno SNI 14 - Conveyor belt - Trimming machine Möhringer 323 001 12 - Stacking system M-TEC - Disposal line / chipping system ZENO ZTI 600/520/160

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled Bcsdpfx Aasqvz U Ejfsu New bearings for pressure rollers and motor new tips opening width: 430 mm

Condition: good (used), Year of construction: 1977, functionality: fully functional, High-Performance Frame Saw / HIGH SPEED FRAME SAW EWD HDN 600 Year: 1977 / Good condition, continuously maintained (can also be fully overhauled and brought up to the latest standard upon request!) TECHNICAL SPECIFICATIONS: Well-maintained high-performance full frame saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw mounting Drive motor and intermediate gearbox Electrical control cabinet with PLC Splitter wedge type AVER, hydraulically driven In very good condition! (Machine can also be delivered fully overhauled if required!) Top condition with remote-controlled carriage Bcjdpow S S A Hefx Aafju 3. Double Edger / Edger Paul KME II with Conveyor Belt KME II, Year: 2010 (As new condition) Cutting height: 125 mm Working width: 750 mm Drive power: 38 kW 4. Complete Waste Disposal with Metal Detector Chipper Rudnick & Enners TH150/500/3 With conveyor belts for material removal and processing Equipped with metal detector for safety and quality of finished products 5. Summary The entire line is in excellent condition and can be inspected at any time. All machines are well maintained and fully operational. 6. Inspection and Contact The machines can be viewed at any time. For further questions or to arrange an inspection appointment, please do not hesitate to contact us.

Condition: defective spare-parts repository (used), Year of construction: 2022, operating hours: 200 h, functionality: not functional, For sale here is a block band saw from the company Drosten, the machine is currently in a defective condition. The block band saw is offered for sale with all attachments, operator's stand, and saw blades. Feel free to contact me with any further questions. Bcjdpjw Tyngsfx Aafsu

Condition: good (used), Year of construction: 1998, functionality: fully functional, Canter Linea COSTA, model Prisma 30, with roller infeed for 6 m and roller outfeed left and right Bodpfewt Uqqsx Aafocu

Condition: new, The edger is used for double-sided edge trimming of boards and logs. The use of automatic width adjustment, smooth feed, and laser markings on the cutting guide enable optimal use of edged boards. Technical specifications: Minimum cutting width: 60 mm, maximum cutting width: 500 mm (horizontal clearance: 700 mm) Edge thickness: max. 65 mm Infeed table: 2000 mm Pick-up table: 2200 mm Distance between electric saws can be adjusted via the control panel Feed speed: uniform Saw diameter: 350 mm Number of saws on the spindle: 2 Bjdswb Uwgspfx Aafjcu Main motors: 2 x 5.2 kW Machine weight: 1000 kg – Laser for marking the cutting line (2) – Electronic width measuring controller ANP 05

Condition: good (used), Horizontal Schulte HB 12-16 block bandsaw, installed in 2019 - 135 cm cutting width - 1,600 mm wheel diameter - 185 mm wheel width - Scoring unit Stone clamping carriage, year of manufacture: 2020 - Fully hydraulic - 2 log turners - 5 clamping fixtures - 2 right-angle stops - 2 high-quality remote controls (one as a spare) - Carriage drive with winch Vacuum lifting device Bjdpfjw Dcqgjx Aafscu - Manual and with automatic functions - Further photos and videos available upon request Available from November/December 2025

Year of construction: 2022, condition: new, New WRC, performance by black series Combination of high -tech equipment with frequency contolled motors and movements. Main motor 30 kW or 37 kW or 45 kW Soft start & stop starting Boards pushing hand with adjustable hight & additional side holders Pressurized blade guidances with oil mist cooling Automatical oil and grease lubricating Bedpjfm Urtsfx Aafjcu Tracking precutter Robust and raised rails with automatical waste cleaners All possible equipment for manipulating with log; movable logturners, patented fast log & prism turners, 2 levels of log grippers Separated self standing control panel with seat and 2 joystick controling. Price & Conditions

Year of construction: 2019, condition: like new (used), SAWMILLL LINE IN EXCELLENT CONDITION, YEAR 2019, AVAILABLE IN DEC.23/JANUARY 24: - LOG DECK Bedpfx Aajpq Sd Ujfecu - BAND SAW WRC 1250 AC with full hydraulic equipment: - max. cut length 9m - main motor 55kW - SEW drive with steel ropes - fast movement - separate comm.panel with 2 joysticks for fast and easy controll of log deck and band saw - precutter - arm for automatic removal of cut board - add.arm for guiding board - automatic blade tensioning - special pressure movable blade guides right and left - V560 special Wravor cut optimizing program - on chassis: 7 grip pins, 6 rollers for log positioning, 5 log turners, 7 centrators, exit belt for boards and slabs exiting band saw

Condition: new, Year of construction: 2025, ARE YOU INVOLVED IN CUTTING THICK LOGS AND ARE YOU LOOKING FOR A POWERFUL BAND SAW THAT WILL CUT YOUR THICK LOG WITHOUT PROBLEMS? THEN WE HAVE A SOLUTION FOR YOU, THE HORIZONTAL BAND SAW WRC 1550! ✔️ROBUST CONSTRUCTION THAT ENABLES SAW STABILITY ✔️MAIN MOTOR 55-110kW ✔️IDEAL RATIO BETWEEN THE DIAMETER OF THE MAIN WHEELS, THE WIDTH OF THE MAIN WHEELS, THE LENGTH, WIDTH AND THICKNESS OF THE BAND SHEET, WHICH ENABLES ACCURATE, FAST CUTTING ✔️DOUBLE-SIDED BEARING WHEELS THAT ENABLE STABILITY OF THE MACHINE EVEN IN THE LONG TERM! ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW HEAD ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW LINE (INCLUDING HYDRAULIC DOUBLE TURNERS DESIGNED SPECIFICALLY FOR TURNING THICK HEAVY LOGS) Bcsdpfxjv R Umuj Aafou 👉 For more information and inquiries, contact us!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, 3-box conveyor; three-part automatic stacked boxes. Board height: 17-27 mm Board length: 800-1200 mm Board width: 80-160 mm Stacking up to 60 pcs/min Bcjdpfx Aewf Digsafsu

Condition: new, Year of construction: 2025, HIGH-PERFORMANCE WRAVOR BANDSAW, SPECIALLY DESIGNED FOR PRECISE AND EFFICIENT CUTTING OF LAMINATED BEAMS. IT ENSURES HIGH-QUALITY CUTS, MINIMAL MATERIAL LOSS, AND OPTIMAL PRODUCTIVITY. Bcsdpfx Aovu Um Nsafeu 📌 Key features: ✔ Precise cutting of laminated beams ✔ Automatic control for increased efficiency ✔ Robust and reliable construction

Condition: used, Year of construction: 2019, For sale: Complete Wood-Mizer sawmill line, fully operational and ready for use in a production facility. The package is intended for processing round timber and producing sawn lumber. The offer includes a Wood-Mizer LT70 band sawmill along with equipment for efficient log feeding, material offloading and sorting, and assisted loading operations. Sale exclusively as a complete set – will not be split into individual components. The Wood-Mizer LT70 sawmill features full hydraulic functions and automatic log loading, significantly improving workflow and increasing production efficiency. The set comprises a Wood-Mizer LT70 SE25SRAHS2-SRP2R band sawmill (year of manufacture: 2019), a 6-meter chain log conveyor, a Wood-Mizer CRD2H-LTR sorting table (year of manufacture: 2021), and an Elephant F-250 vacuum lifter (year of manufacture: 2017) for manual handling, with a lifting capacity of 250 kg. This package provides a complete solution for sawmill operations, ensuring efficient organization of the cutting, material transport, and sorting processes. All machines are in good working condition and ready for immediate use. Inspection possible on site by prior appointment. Price for the complete set: EUR 68,000 net Bsdpfx Asygh H Roafecu Terms of sale: EXW (PL 38-120 Czudec), in accordance with Incoterms 2020. Please contact us by phone for further information or to schedule a viewing.

Condition: used, Year of construction: 2019, For sale: Complete Wood-Mizer sawmill set, fully operational and ready for immediate use in a production facility. The set is designed for processing round timber and sawn timber production. The offer includes a Wood-Mizer LT70 band sawmill with auxiliary equipment for efficient log feeding, material offloading and sorting, as well as handling and loading operations. The sale is strictly for the complete line as a whole; components will not be sold separately. The Wood-Mizer LT70 sawmill features a full hydraulic system and automatic log loading, which greatly increases production efficiency and streamlines operation. The set consists of a Wood-Mizer LT70 SE25SRAHS2-SRP2R band sawmill, year of manufacture 2019, a 6-meter chain log conveyor, a Wood-Mizer CRD2H-LTR sorting table, year of manufacture 2021, and an Elephant F-250 vacuum lifting crane, year of manufacture 2017, suitable for manual material handling with a lifting capacity of 250 kg. This package offers a complete solution for sawmill operations, enabling an efficient workflow for cutting, transport, and sorting processes. All machinery is fully functional and ready for continued operation. On-site inspection is available by prior arrangement. Price for the complete set: EUR 68,000 net Terms of sale: EXW (PL 38-120 Czudec) according to Incoterms 2020 Bcedpfxoyghiro Aafsu Please contact us by phone for further information and to arrange an inspection.

Condition: excellent (used), For sale: STRAVIS sawmill line consisting, among others, of a TTLG36 circular saw, PW15 multi-blade saw, PFPI3/3 panel saw, and numerous conveyors. Bcodpfx Aasyfz Ilefju

Condition: good (used), Complete restacking system Wood lengths: 3–5 m Wood thicknesses: 17–140 mm Wood widths: 75–300 mm Performance: 60–80 boards/minute Cross conveyor Tipping table Singulation Alignment Sorting facility Stacking Without stick magazines Cross conveyor Complete electrical system/control Siemens S7 (Alfha) Bcsdoyfb Hbepfx Aafeu

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,100 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 19,500 kg, cutting height (max.): 800 mm, input current: 250 A, input voltage: 400 V, saw blade width: 500 mm, main saw diameter: 500 mm, Equipment: cabin, centralized greasing system, scorer, - Log circular saw, fully functional Bcsdjyc Ncrjpfx Aafeu - max. log diameter 800 mm, max. length 6 m, individual pieces up to 8 m - max. timber size 180/180 mm, in wide board mode 310/180 mm - automatic timber sorting - price includes log feeder, 2x outfeed conveyors, and 1x sorting conveyor

Condition: excellent (used), For sale: 3 FINSCAN lines: 1x Finscan camera sorting line Boardmaster HD Year of manufacture: 2012 1x Finscan NOVA No need to turn the pieces and without infrared lights. Speed: 200 pcs/min Year of manufacture: 2014 Bjdpfx Aaex Up Dbefscu 1x Finscan NOVA Camera sorting, speed 200–220 pcs/min. No need to turn the pieces and without infrared lights. Year of manufacture: 2018

Condition: good (used), Ari Vislanda sawmill Kockums chippers + double profiling line capacity 75,000 m3 timber per shift. Bsdpjx Up A Rofx Aafjcu Only one operator required. Lisker control for Ari/Kockums line and edging line as well.

Condition: ready for operation (used), functionality: fully functional, saw drive: 13,200 W, Well-maintained complete width-adjustable sash saw system LINCK type BV. Right-hand machine. Frame width 760 mm, stroke 600 mm, max. passage height 710 mm. Complete with log infeed, sash carriage with auxiliary carriage. Split wedge with roller conveyor, cross transfer, and model return. Sash saw with new saw tensioners. Reducing gear and frame including 132 kW motor with belt drive 310 rpm. Various spare parts can be purchased as a package. Dismantling at buyer's own responsibility. Full truck loading after dismantling can be offered. Bcjdpfx Aaext Uvqjfeu