Used Saw Shaft Diameter 30 Mm for sale (118,268)

Condition: new, functionality: fully functional, Year of construction: 2025, Technical characteristics: Section modulus 100 cm³ Main shaft diameter 130 mm Pgedod Eqg Nopfx Adnsw Side shaft diameter 130 mm Outside diameter of the bending rolls 410 mm Adjustable rolling speed 0-6 m/min Installed power 18.4 kW (25 hp) Length 1,900mm Width 2,200mm Height 1,900mm Weight 5,720 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rolls, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the roller position of the side rollers Optional, installed: Siemens NC control PGS-CLASSIC

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new, with new electrical system and Siemens S7 control. Completion upon order. Cross-cut saw with chalk line detection. Wood cross-sections: 430x30 / 300x150 / 200x200 mm Pgodpfx Adjv Diy Asnew DIMTER OptiCut 602 R Saw blade diameter: 650 / 700 mm Feed speed: 120 m/min Saw motor: 15 kW SEW servo drive 11.00 kW with frequency converter.

Condition: good (used), Shaft, axle shaft, spindle shaft, axle bolt -Shaft: axle shaft spindle shaft 2 pieces -Type: Shaft Ø 30/40/45 mm -Dimensions: see photos Pgodswq Ip Iepfx Adnow -Shipping/Price: complete -Total dimensions: Ø 65 x 82 mm -Weight: 0,6 kg/pc.

Condition: new, Year of construction: 2024, saw blade diameter: 285 mm, cutting height (max.): 75 mm, warranty duration: 12 months, Capacity / Capacitiy Ø10mm - Ø75mm Saw Body / Saw Body 30 Degree Angle Linear Slide 30 Degree Angle Linear Slide Saw Engine Power / Saw Engine Power 11 KW Hydraulic Pump Engine Power / Hydraulic Pump Engine Power 3 KW Saw Feeding Servo / Saw Feeding Servo 1.5 KW SIEMENS Material Feeding Servo / Material Feeding Servo 1.5 KW SIEMENS Saw Speed / Saw Speed 70-160 (r./min.) / (RPM / Min) Saw Blade Dimensions Ø285x2,0x1,7x32mm Saw Cutting Feed / Saw Cutting Feed Servo Motor With Brake and Screw Spindle Movement Servo Motor With Brake, Screw Spindle Movement Part Feed System / Part Feed System Servo Motor and Screw Spindle Movement Servo Motor Screw Spindle Movement Automatic Part Feed Length / Auto Part Feed Length Single Feed 10-1000mm / Single Feed Part Length to be Auto Cut / Part Length to be Auto Cut 7000mm (Max) 1500mm (Min) Chip Conveyor / Chip Conveyor Palletized / Pallets Cooling System / Cooling System Pulverized Cutting Oil / Pulverized Cutting Oil Machine Weight / Machine Weight 3.500KG Bench Dimensions / Bench Size (Machine Capacity) 2595mm x 6781mm (with Loading Table and Chip Conveyor) Pjdevbzp Ropfx Adnogw Lubrication / Lubrication Automatic and Manual / Auto and Manual Control System / Control System Siemens PLC, Screen, Servo and Drivers, Touch Color Screen / Siemens PLC Screen, Servo and Drivers, Touch Color Screen Hydraulic System / Hydraulic System Rexroth Valves, Cooled Hydraulic Unit / Rexroth Valve, Cooled Hydraulic Unit

Condition: new, Year of construction: 2024, saw blade diameter: 360 mm, cutting height (max.): 100 mm, warranty duration: 12 months, Capacity / Capacitiy Ø20mm - Ø100mm Saw Body / Saw Body 30 Degree Angle Linear Slide 30 Degree Angle Linear Slide Saw Engine Power / Saw Engine Power 15 KW Hydraulic Pump Engine Power / Hydraulic Pump Engine Power 3 KW Saw Feeding Servo / Saw Feeding Servo 1.5 KW SIEMENS Material Feeding Servo / Material Feeding Servo 1.5 KW SIEMENS Saw Speed / Saw Speed 30-130 (r./min.) / (RPM / Min) Saw Blade Dimensions Ø360x2,25x2,7x40mm Saw Cutting Feed / Saw Cutting Feed Servo Motor With Brake and Screw Spindle Movement Servo Motor With Brake, Screw Spindle Movement Pgsdpevbzrxsfx Adnjw Part Feed System / Part Feed System Servo Motor and Screw Spindle Movement Servo Motor Screw Spindle Movement Auto Part Feed Length / Auto Part Feed Length Single Feed 10-580mm / Single Feed Part Length to be Auto Cut / Part Length to be Auto Cut 7000mm (Max) 1000mm (Min) Chip Conveyor / Chip Conveyor Palletized / Pallets Cooling System / Cooling System Pulverized Cutting Oil / Pulverized Cutting Oil Machine Weight / Machine Weight 5000KG Bench Dimensions / Bench Size (Machine Capacity) 3368mm x 6624mm (with Loading Table and Chip Conveyor) Lubrication / Lubrication Automatic and Manual / Auto and Manual Control System / Control System Siemens PLC, Screen, Servo and Drivers, Touch Color Screen / Siemens PLC Screen, Servo and Drivers, Touch Color Screen Hydraulic System / Hydraulic System Rexroth Valves, Cooled Hydr

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm thickness 3 mm Number of teeth 180 Pgedpjmxi T Asfx Adnew Pitch circle driver bore 63 mm diameter driving hole 11mm HSS unused ,from magazine liquidation bearing number 28418

Condition: ready for operation (used), 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Pjdpfx Adou Tc Tvsnjgw Safety switch Width: 900 mm, Height: 1500 mm Year: 2003

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm Pgodot Ht Hhopfx Adnsw - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly Psdjcbq Nwopfx Adnsgw -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Year of construction: 2004, condition: excellent (used), Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings Pgedpfxjiqpx No Adnsw -Type: Drawing No. 281.30.1200.013.11.1503 -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition Podpfexl Eadsx Adnogw • Photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included. Pedjudwzcopfx Adnegw

Condition: used, Year of construction: 2010, functionality: fully functional, Complete Automatic System Pgodpfx Adev H Ufvjnsw Beam Saw Giben Prisma 3000 , Cutting 3800 + Systraplan , Professional Stacking and destacking System , Complete line , 24m * 10 m , 2 places for loadin palets by forklift , Capacity about 20-25 palet places , * 5 palets in one place, about 100 pallets , Speed 120m/min longitudinal , 80 m/min * short side , Load capacity of the vacuum system 500 kg , More pictures and videos avilable ,

Condition: excellent (used), functionality: fully functional, Engine power 2.2 KW Manual aggregate movement Disc diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Pjdpfx Aswbpwhednjgw Starting the cutting process with a pedal Safety switch Width 900 mm, height 1500 mm

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.0 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm Pedpfx Adjw Au Nljnjgw -Number of teeth: see photo -Quantity: 1x saw blade available -Weight: 10.6 kg

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.0 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Quantity: 1x saw blade available -Weight: 10,5 kg Psdpfxew Au Izs Adnsgw

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.0 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm Podpfx Aow Au Hqjdnogw -Number of teeth: see photo -Quantity: 1x saw blade available -Weight: 10 kg

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.4 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Number: 2x saw blades available Pgjdpfsw Au Egox Adnjw -Price: per piece -Weight: 10.6 kg

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Pgedpfxjw Au D No Adnew -Saw blade: Ø 630 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Number: 2x saw blades available -Price: per piece -Weight: 10.5 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6 mm -Inside: Ø: 80 mm Pgsdpfx Aevzn N Dednsw -Bolt circle: Ø 120 x 22 mm -Number of teeth: 70, see photo -Weight: 9 kg

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Leitz, saw blade for non-ferrous metal or plastic, unused in original packaging -Type: 165828 300x3.2/2.6x32 Z72/13.09 -Inside: Ø 32 mm -Number of teeth: 72 teeth -Speed speed: n max. 7600 rpm -Quantity: 1x saw blade available -Dimensions of box: 380/380/H15 mm Pgjdpfx Asquft Njdnjw -Weight: 1.6kg/piece

Year of construction: 2024, condition: excellent (used), Plug-in shaft for hollow shaft, friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, drive shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: 4700419300 suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 160 x 600 mm -Groove width: 40 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 735 mm Pgsdpfx Adjv Hmf Ionew -Weight: 173 kg/piece

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Pgsdpfx Ajvzn D Ujdnew -Saw blade: Ø 630 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 23 mm -Number of teeth: 70, see photo -Weight: 10 kg

Condition: used, Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw Poded Sachspfx Adnegw -Rolls: Ø 89 x 330 mm -Roll width: 330 mm -Dimensions: 435/580/H720 mm -Weight: 20.5 kg

Condition: used, Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 845-1350 mm adjustable Pgodod Dh A Sspfx Adnsw -Roll width: 300 mm -Dimensions: 480/420/H845 mm -Weight: 9 kg