Used Gang Saw Blade for sale (9,198)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Operating instructions included Dcsdpfx Afewd N Das Ion Feed rate 30 or 60 teeth per minute

Condition: excellent (used), functionality: fully functional, overall weight: 50,000 kg, total height: 5,400 mm, total width: 4,500 mm, total length: 14,000 mm, feed length X-axis: 800 mm, rotational speed (max.): 80 rpm, 80 blade gang saw with top quality of cutting easily reaching C120 surface, so no honing is required. Dcsdpfsv D Napex Af Ijn Blade stroke: 800 mm. Blades number: 80 Blade length: 4,350 mm. Motor power: 110 kW Cycles per minute: 85 Voltage: 400v/50hz Machine weight: 54,000 Kg. Useful cutting side: 3,200 x 2,000 x h 2,000 mm. Overall dimensions: 13,600 x 4,500 x h 5,400 mm. With n.2 block trolleys. More data or pictures upon request. Machine is fully functioning and in top condition.

Condition: excellent (used), suitable e.g. for ESTERER SS 56, 1,320 mm long x 140 mm wide x 2.2 mm thick, tooth pitch 22 mm, serrated facing 30 x 8 mm for JANSEN-Angel type no. 7 Dedpslu Dzxsfx Af Iscn

Condition: repair required (used), Year of construction: 2002, operating hours: 14,000 h, functionality: limited functionality, Wintersteiger dsg 200S 250mm height lamella sawn In-feed roller not working Dcodpfx Aoxlr Hqef Ijn

Condition: new, Code: N0764 Brand: SCM Model: NOVA SI X - CE Standard Circular saw with +/- 46° double blade tilting with 3 controlled axis - Version READY 3 UP - CE Standard equipped with following optionals : Start buttons integrated into the sliding table Squaring frame with Compex device Squaring fence with n° 2 LCD displays for position reading Technical data: Max. saw blade diameter with mounted scorer mm 400 Maximum saw blade projection from table to 90°/+46°/-46° mm 136/97/60 Cutting width on rip fence mm 1270 Dsdpfx Aed Dc Ecjf Iecn Squaring capacity mm 3200 Three-phase motors starting from kW/Hz 7 (8) / 50 (60)

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Dcedpfxsui Ifco Af Ion

Condition: excellent (used), Bargain with only 4,800 hours: Kälin multi-blade saw, 250 mm chain width, 300 mm saw blades, 30 HP stepless, chain in very good condition. Djdpfoxg Trqex Af Iecn

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Dcedpsxlnpnsfx Af Ion

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Dodpfjxliguex Af Ijcn Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 51205, CML SCA 220 T 250 Multi Rip Saw. Dodewn D E Hepfx Af Iocn in very good condition. 250m/m Track in Very Good Order. Feed Speeds from 0 to 36m/min. Max sawblade diameter 330m/m. c/w Spacers and Operator manual. Very good range of photos on WhatsApp, show your mobile number on your enquiry.

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Dodstwy Iujpfx Af Iocn Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Spare parts for LINCK FSF 56 gang saw: Dsdjwziwbjpfx Af Ijcn 8 saw frame guides, newly milled, 8 guide shoes prism new, flat newly milled, 1 saw frame, 2 bottom rollers and 2 top rollers with replaceable half shells, gear racks, guide bearings, chain wheels, 1 set of chain tensioners, 1 lifting hydraulics with 2 hydraulic motors and gearbox, 2 sets of white metal main bearings, 1 idle wheel with bushing

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Dcedpoxiza Usfx Af Ion

Year of construction: 2015, condition: used, Cutting height max. 140 mm Motor output 11 kW cutting width 600 mm Cutting length 6200 mm Dimensions (L/W/H) 8400x1900x2090 mm Weight 3500 kg Number of working hours 3331 h Raimann FlexiRip "Jrionline" Automatic Longitudinal Circular Saw ----- Cutting length 6200 mm Machine base, carriage, feed ----- - Motor according to IE3 standard: 11 kW (15 HP) - Precise cutting thanks to the self-supporting, torsion-resistant steel construction and carriage guides on generously dimensioned, hardened, and ground round steel tracks. Extra-long and wide carriage with ball-bearing rollers, precisely adjustable and play-free via eccentric axes. - Clean cutting thanks to the stepless height adjustment of the saw blade for quick and optimal adjustment of the saw blade projection to the workpiece thickness. (Levels 1-18) - Continuously adjustable feed speed via pedal across the entire cutting length from 1-80 m/min - Potentiometer for presetting the maximum feed speed - Anti-blocking system for FlexiRip: If the maximum permissible load is exceeded, the saw blade automatically lowers to prevent jamming. The saw carriage then returns to the start position. Your advantage: Reliable protection against machine overload and sawblade jamming - Saw shaft speed: 2,900 rpm - Maximum cutting height: Sawblade diameter 400 mm: Max. cutting height 65 mm Sawblade diameter 450 mm: Max. cutting height 90 mm Sawblade diameter 500 mm: Max. cutting height 115 mm Sawblade diameter 550 mm: Max. cutting height 140 mm Width stop and machine table ----- - Width stop adjustment via several control levers on the front of the machine for precise positioning of the stop with a large digital display, easy to rotate and tilt. - Width stop in a cantilever design with 6 pneumatically pivoting stop cams - Smooth, even, and backlash-free operation of the stop - Width stop driven by 2 hardened, ground ball screws, 32 mm diameter - Maximum usable width (standard): 600 mm - 6 cross chains in the rear machine table, including an extension to the vibrating feeder with roller conveyor transfer (L = approx. 600 mm) to the vibrating feeder. Chain distribution according to the layout plan Control System ----- - Electronic machine and stop control "PLC control" with easy-to-read touchscreen on the left side at the start of the cut, mounted at eye level, easily adjustable for rotation, tilt, and height. Ten different cutting lists can store 10 width dimensions each and easily retrieved by touching the screen. These dimensions can be accessed either absolutely or as consecutive dimensions, the latter for working from back to front. Furthermore, for the consecutive sequence from back to front, five different dimensions with target quantities can be stored for automatic board cutting. - The width stop's free travel function can be selected via the touchscreen. - Error diagnostics via error display and cause note in plain text on the screen. Hour and cut counters for precise recording and output of production output. - Rotatable control panel on the swivel arm is particularly advantageous when cutting large-format panels. Dcsdpfewk N U Eox Af Ion Operation and Tools ----- - Workpiece clamp mounted on the upper guard beam, inside the slats. ...

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Djdpfxsxlfwpj Af Iscn Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: like new (used), chain width: 210 mm, Transport chain Width 210 mm 59 links Interholz RAIMANN Dcsdpoqwdvgefx Af Ion Freiburg

Condition: used, Double edger / Edger line / Multi-blade circular saw Wurster & Dietz LB 12 0-line left Right-hand machine (adjustable saw blade right) max. pass-through height: 100 mm max. pass-through width: 65 mm with 5-strand cross conveyor as feed with 2 crosscut saws with roller infeed table Dcsdsxhbxnjpfx Af Ion with laser with lath head with chip separator with spiral roller conveyor (length: 9 meters) with discharge table (cross conveyor 5-strand) (length: 5.2 m, width: 2.2 m) Location: Austria, near Ried im Innkreis

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm Dcedew Eu Akopfx Af Ion 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: excellent (used), CATALOG NO. 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Saw blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. timber width: 870 mm - Min. timber length: 1500 mm From above: - Pawls - Driven shaft, toothed, metal - Pawls - Driven shaft, toothed, metal - Pressure system - Saw shaft - 2 driven metal feed rollers, pneumatically pressed From below: - Guide rail - Metal sliding roller - Pawls - Track (caterpillar track) - Saw shaft - Track (caterpillar track) - Stepless feed speed control via inverter: 4–40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric raising/lowering of frame: 0.55 kW - Electric adjustment of saw shafts: 2 × 0.25 kW - Central lubrication - Extraction outlet diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg Included: - Centering device - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 × 1.5 kW - Upper pneumatic pressure system - Side pressure system - Dimensions (L/W/H): 4850 / 1100 / 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Manufactured in the Czech Republic – Two-shaft – Centering device – Operating & Maintenance Documentation (DTR) – Year of manufacture: 2010 – Used multi-blade saw, very good condition Net price: 262,900 PLN Net price: 61,860 EUR Net price calculated at an exchange rate of 4.25 PLN/EUR Dcedpfxjlrvguj Af Ijn (price may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2024, working width: 600 mm, saw blade bore: 70 mm, max. cutting height 160 mm max. cutting width 600 mm feed 5-30 m/min. Saw motor 55 KW Dcjdpfx Afjvcn D Re Isn feed motor 2,2 kW max. saw blade insert at 145 mm 6 Saw shaft diameter 70 mm CE compliant design Control cabinet and control panel Weight 3,200 kg Special equipment - Electric height adjustment of the feed rollers

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, cutting height (max.): 80 mm, overall weight: 1,500 kg, saw blade diameter: 280 mm, motor voltage: 400 V, Powerful lamella saw from Swedish production. Equipped with a 30 kW motor. Additional saw blades and spacer rings are included in the scope of delivery. Very good condition, beam width 200 mm. Transport across Europe can be organized at a good price. Dcsdoxg N Emspfx Af Ijn

Condition: used, Year of construction: 1974, Technical details: Dodpfx Afswqplke Ijcn total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: new, Band saw blade Make Röntgen Type bi-alfa cobalt Dodpjrwl R Nofx Af Ijcn Dimensions :4860 x 34 x 1.1 mm 3/4 Combi 10 unused, out of magazine

Condition: excellent (used), passing width 1.000mm, stroke 800 mm, saw motor 22 kW or 30 kW, high adjustment by gear motor with brake, automatic lubrication pump, clamping carriage 6 m with 7 m rack, 6 mechanical clamping stations Dcedpfx Afotzlrfj Ion

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA track width 250mm shaft width 250mm max. disc diameter 350mm disc hole diameter 80mm max. cutting height 120mm table width with clearance 700mm table length 1790mm *from above: pawls smooth pressure shaft pawls smooth pressure shaft shaft with saws 2 smooth pressure shafts from below: guide smooth slip shaft pawls track central lubrication Dcodpjvx Rcuefx Af Isn 1.1kW feed motor 30kW main motor electric lifting of the body manual lifting of the shaft with saws diameter of the exhaust port 160mm overall dimensions length/width/height 2250x1700x2000mm weight approx. 3000kg – German production – electric lifting of the body and shaft – smooth regulation of the feed speed – used multi-saw, very good condition Net price: PLN 76900 Net price: EUR 18100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)