Used cold saws - fully automated - saw blade diameter 0-350mm for sale (37)

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Ijdpema Ddrjfx Adnsa Model: S200 Length: 4.5 m Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3092102159, cutting height (max.): 70 mm, cutting width (max.): 60 mm, saw blade diameter: 285 mm, saw drive: 6 W, cutting speed: 160,000 mm/min, TECHNICAL DETAILS Material type: Construction steels, stainless steels, tool steels Saw blade type: Carbide tipped Cutting diameter: 50 – 70 mm Material width: 60 mm Material height: 70 mm Cutting area Round cutting area: 15 – 70 mm Square cutting area: 15 – 60 mm Flat cutting area: 15 x 15 – 70 x 60 mm Min. remnant length: 65 mm Saw blade and fixture Saw blade sizes: 250x80 T / 250x60 T / 285x60 T mm Saw blade holder: 32/4x9/50 mm Saw blade clamping flange: 110 mm Iedpswm Hr Hjfx Adnea Performance Cutting speed: 40 – 160 m/min Saw blade drive: 5.5 kW Saw feed Feed speed (infinitely variable): approx. 25 – 1,000 mm/min Rapid movement: approx. 8,000 mm/min Material feed Trolley feed speed: 15 – 40 m/min Rapid movement approx.: 95 m/min Loading table Bar lengths: 1,600 – 6,000 mm Support depth: 750 mm Max. single bar weight: 200 kg Max. total load: 2,000 kg Working height: 1,000 mm MACHINE DETAILS Machine weight: 1 t Cutting direction: Straight cut Automation: automatic Weight: 980 kg

Condition: new, MEP TIGER 372 CNC LR 4.0 Item number TI372CNCLR motor power 4,0 kW belt opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Electro-mechanical vertical circular saw with semiautomatic function for the use of HSS saw blades to make precision cuts from 45° right to 60° left with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, for the same thickness of material Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feeding (length 1000 mm) via recirculating ball screw with stepper motor and movable feeding vice -Vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush -The machine is designed for lift truck transport incl. tools and operating instructions Electrical equipment: -control panel -80 different cutting programs programmable -control light for operational readiness -Main safety switch -console for programming and control, LCD display with auto-diagnostics -LED check indicator on the control panel to check the machine functions -Emergency stop button -Speed changeover switch -Thermomagnetic protection -Undervoltage release Iedpfx Adjchkyrsnsa -Switch handle protection class IP 55 -Low voltage system 24 volts -Electric coolant device for lubrication and cooling of the saw blade (attachment of a micro-spraying device possible) -Motor 4,0 kW - 400 Volt MEP TIGER 372 CNC LR 4.0 RC with automatic miter cutting Item number TI372CNC LR 4.0 RC motor power 4,0 kW bench opening 190 mm belt dimensions 370x32x3 weight 1.060 Kg Speed 15-150 1/min. Cutting surface 0° 120 / 110 / 180x100 Cutting surface 45° right 115 / 100 / 120x100 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description -Automatic electromechanical vertical circular saw for the use of HSS saw blades to perform serial cuts with automatic miter adjustment between -45° to +45° on steel. -Semi-automatic cycle to perform miter cuts between -45° and +60°. -with multi-micro processors with two controlled axes that allow to program 80 different cutting programs, each with different cutting length and number of pieces, on the same material thickness. Basic equipment: -Saw head slides on recirculating ball linear double guides. -saw head feed with electromechanical cylinder -Rotary axis with thrust bearing -three-stage gearbox -material feed (length 1000 mm) via recirculating ball screw with stepping motor -movable feeding vice -vice opening 190 mm -Saw head stroke directly programmable from the control panel, for adaptation to the cutting material -Pneumatic vertical vice -Saw blade HSS DMO 5 Æ 370x32x3 for solid and profiled material -chipping brush Electrical equipment: -control panel -80 different cutting speeds

Condition: new, Year of construction: 2024, saw blade diameter: 285 mm, cutting height (max.): 75 mm, warranty duration: 12 months, Capacity / Capacitiy Ø10mm - Ø75mm Saw Body / Saw Body 30 Degree Angle Linear Slide 30 Degree Angle Linear Slide Saw Engine Power / Saw Engine Power 11 KW Hydraulic Pump Engine Power / Hydraulic Pump Engine Power 3 KW Saw Feeding Servo / Saw Feeding Servo 1.5 KW SIEMENS Material Feeding Servo / Material Feeding Servo 1.5 KW SIEMENS Saw Speed / Saw Speed 70-160 (r./min.) / (RPM / Min) Saw Blade Dimensions Ø285x2,0x1,7x32mm Saw Cutting Feed / Saw Cutting Feed Servo Motor With Brake and Screw Spindle Movement Servo Motor With Brake, Screw Spindle Movement Part Feed System / Part Feed System Servo Motor and Screw Spindle Movement Servo Motor Screw Spindle Movement Automatic Part Feed Length / Auto Part Feed Length Single Feed 10-1000mm / Single Feed Part Length to be Auto Cut / Part Length to be Auto Cut 7000mm (Max) 1500mm (Min) Ijdpfx Adevbzp Ronja Chip Conveyor / Chip Conveyor Palletized / Pallets Cooling System / Cooling System Pulverized Cutting Oil / Pulverized Cutting Oil Machine Weight / Machine Weight 3.500KG Bench Dimensions / Bench Size (Machine Capacity) 2595mm x 6781mm (with Loading Table and Chip Conveyor) Lubrication / Lubrication Automatic and Manual / Auto and Manual Control System / Control System Siemens PLC, Screen, Servo and Drivers, Touch Color Screen / Siemens PLC Screen, Servo and Drivers, Touch Color Screen Hydraulic System / Hydraulic System Rexroth Valves, Cooled Hydraulic Unit / Rexroth Valve, Cooled Hydraulic Unit

Condition: new, - Fast cutting saw for solid material / profile up to 75mm - autom. loading magazine for bars up to 6300mm length and 3t weight - feed via ball screw Ijdeggytqopfx Adnoa - single stroke with 600mm - SIEMENS - electronics / drive / control - good parts / first cuts are sorted - on request with conveyor unit for sawn parts - robot connection possible - incl. suction

Condition: like new (used), Year of construction: 2002, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 0213101, saw blade diameter: 350 mm, cutting height (max.): 90 mm, input voltage: 380 V, working range: 4,000 mm, A used high class refurbished 2002 BEWO Automatic Circular Sawing including BEWO deburring machine DB-90. Machine Model FCH-90-M serial number 0213101 Including: BUNDLE LOADER: • Max. bundle diameter 650 mm, max lifting capacity 4000 kgs equally divided over 5 lifting units (max starting length 7500 mm). • The bundle loader has 5 new lifting belts. • The bundle loader is equipped with new sensors. CUTTING UNIT: • Heavy duty, high speed roller drive tube transport system, including new transport rollers. • Transport system is provided with new tooth belts. • Automatic setting of saw blade stroke. • Cutting speed sawblade chosen by customer (RPM) + new blade motor drive tooth belt. • 3 KW cutting head motor + frequency converter. • 1 saw blade, spindle 40 mm + clamping flange. • Micro lube blade coolant system c/w spray mist blade cooler. Iedpfjv Sycqsx Adnja • Hydraulic material clamping system. • Tube discharge system, Max cut length capacity = 4000 mm. • 2 man length stops with new DRO + hydraulic clamping. • Siemens Simatic Panel operator HMI display and Siemens S7-300 PLC. NOTE: Control in METRIC. • 1 set of jaws included with machine. • Electrics built to European standard 400V 50Hz • Feed trough motor + new encoder + frequency converter. New plexiglass windows + new gas springs. • New steel plate for ejection table top including new table nose. • Transport system and material stops are equipped with new sensors. • New tooth belts for encoders. • New chip brush for saw blade. • New hold down finger system. • New hydraulic filters. • FAT at our workshop with material supplied by the end user. • De commissioning • Packing and loading/securing into customers container/truck. Delivery FCA. • No transport and installation but can be quoted additionally and be done by our experienced team.

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 6 m Material Length: 4680 mm Iodpfx Adjma Ddvonja Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, MEP TIGER 352 NC 5.0 [Fully automatic] Article number TI352NC motor power 3,0 kW belt opening 190 mm belt dimensions 350x32x2,5 weight 680 kg Speed 15 - 90 m/min. Cutting surface 0° 115 / 95 / 180x95 Cutting surface 45° right 110 / 95 / 125x95 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Electro-pneumatic, vertical, linearly guided automatic saw for the use of HSS saw blades to make serial cuts from 60° left to 45° right on steel. The machine also works in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by MEP control, latest generation, which allows to program 1000 different cutting programs, each with different cutting length and number of pieces, for the same material thickness. FEATURES: -New centralized control panel on articulated arm to allow operators to easily reach the emergency stop switch from any working position. -NEW: Fieldbus communication system (Modbus protocol) with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: + saw band speed + number of cuts programmed and executed + saw band thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -NEW: Display and recording of the alarm and error messages with the possibility of displaying the incidents that have occurred. -NEW: Iedpfechhhdex Adnsa

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0612072, saw blade diameter: 350 mm, cutting height (max.): 90 mm, controller manufacturer: Siemens, controller model: Simatic Multi Panel, BEWO prism clamping system for simultaneous sawing of multiple tubes TECHNICAL DETAILS Control: Siemens Simatic Multi Panel Cutting capacity Round tubes: 8 - 90 mm Square tubes: 10 x 10 mm - 80 x 80 mm Maximum capacity: 8,000 tubes per hour Saw motor Power: 5.5 kW Cutting speed: 50 - 300 m/min EQUIPMENT - Integrated deburring machine for seamless processing - BEWO prism clamping system for simultaneous sawing of multiple tubes Isdpfx Aov Nagdednsa

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 3 m Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES. Iodpfx Adema Dc Uonja

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture Iedpema Dfajfx Adnsa • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. Iodpfxjma Dd Ij Adnsa • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.