Used center lathes 400-499mm turning diameter over bed for sale (208)

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Hodpfx Aok Egrpsansnr Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws Hnjdpfx Aoykca Hoansr - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: new, turning length 1000 mm turning diameter 400 mm turning dia. in gap 560 mm spindle bore 52,0 mm turning speeds 45 - 2.000 U/min bed width 210 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 100 mm total power requirement 2,0 / 2,4 kW weight of the machine ca. 810 kg. range L-W-H 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears Hnsdpexaau Sofx Aanor - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Operating tool

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1220 kg range L-W-H 2070 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge Hjdpexaavvofx Aansnr - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: new, turning length 1000 mm turning diameter 350 mm turning dia. in gap 450 mm spindle bore 40,0 mm turning speeds 70 - 2000 U/min Hnjdow U U R Sjpfx Aaner bed width 180 mm spindle taper 55029 D 1-4 taper in tailstock 3 MK quill travel 110 mm total power requirement 1,5 kW weight of the machine ca. 529 kg. range L-W-H 1730x700x1340 mm Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed steady rest - passage diameter max. 60 mm - Follow-on steady rest - passage diameter max. 60 mm - Clamping plate 250 mm - Quadruple tool holder - Shaft fixing device - Protection device for tool holder - Slip clutch - Micrometer longitudinal stop - Coolant device - Extendable chip tray - Frequency converter - Foot pedal with brake function according to CE - Splash guard - Thread gauge - LED machine light - Digital speed display - Reducing sleeve - Change gears - 2 centering points - Base frame - Operating tool

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 30-550 / 550-3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 5.5 kW weight of the machine ca. 1145 kg. range L-W-H 2090 x 1050 x 1600 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm Hodpfjxaakysx Aansnr - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve - 2x centering tips - Chip back wall - Operating tool

Condition: new, turning length 1500 mm turning diameter 410 mm Hnedpjxaaldofx Aaner swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52,0 mm turning speeds 30 - 3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 120 mm total power requirement 5,5 kW weight of the machine ca. 1400 kg. range L-W-H 2530 x 1000 x 1450 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve - 2 centering points - Chip back wall - Operating tool * Images show identical machine

Condition: used, Year of construction: 2004, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32,0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm Hnjdpfx Ajxaa D Toaner - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Condition: new, turning length 1000 mm turning diameter 380 mm turning dia. in gap 490 mm Hsdpfx Aajxabv Rsnenr spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Condition: new, turning length 1500 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1400 kg range L-W-H 2570 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light Hsdjxab Umjpfx Aanenr - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: new, turning length 1000 mm turning diameter 360 mm swing diameter over bed slide 220 mm turning dia. in gap 502 mm spindle bore 52,0 mm turning speeds 70 - 2.000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 3 MK quill travel 100 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1825 x 750 x 1600 mm Hnjdexaaz Eopfx Aanjr Scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 280 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Condition: new, turning length 1000 mm turning diameter 360 mm turning dia. in gap 480 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 110 mm total power requirement 1,5 kW weight of the machine ca. 540 kg. range L-W-H 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame Hnjdpjxaawasfx Aanor - Operating tools

Condition: new, turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1845 kg. range L-W-H 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall Hnsdpfx Ajxab Nqjanjr - Operating tool

Condition: new, turning length 850 mm turning diameter 400 mm swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light Hedpfsxaaxwex Aansnr - Change gears - Reduction sleeve - 2 centering points - Chip rear wall - Operating tool

Condition: new, turning length 1000 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm Hodpfx Aaoxab H Aonjnr total power requirement 5.5 kW weight of the machine ca. 1675 kg. range L-W-H 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power. Hedpjt Ipi Iofx Aansnr

Condition: used, Year of construction: 1989, centre distance 2000 mm Hnjdpoyi Hvvefx Aansr 600 weight of the machine ca. 3,2 t Passage 49 mm Digital Lynette

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm Hnsdpfx Aasx H Szysnor >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 40 mm, turning diameter: 350 mm, turning length: 1,000 mm, total length: 700 mm, total width: 1,730 mm, total height: 1,340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 70 rpm, metric thread diameter (max.): 7 mm, metric thread steps: 32, overall weight: 272 kg, three-jaw chuck diameter: 160 mm, The Standard 165 Top precision lathe is distinguished by its robust design and high functionality. Its rich standard equipment, including essential accessories such as a 3-axis digital readout, steadies, LED work lighting, and CE-compliant safety features, makes it an extremely versatile model. Additionally, the machine is supplied with a quick-change tool post system. - The ideal solution for toolmaking companies, vocational training workshops, and repair shops - Bed made of cast iron, ground and induction hardened - Easy and precise speed and feed adjustment with an ergonomically designed control panel - Standard equipment includes a leadscrew and feed shaft for threading and automatic feed Hjdpfx Aasyr Hnkonjnr - Convenient—single-handed tailstock clamping system, suitable for taper turning - Removable gap bridge enables the machining of larger workpieces - Modern main spindle bearing system - Hardened and ground gearbox and shaft gears - Standard equipment includes: 3-axis digital display, LED lighting, and base - Foot brake significantly reduces downtimes - Motor with magnetic brake according to CE standards - Standard fitted front chip tray - Quick-change toolholder set, Multifix system included in the delivery Centre distance 1000 mm Centre height 175 mm Swing over bed 350 mm Swing over removable gap 450 mm Swing over cross slide 190 mm Bed width 180 mm Spindle bore 40 mm Spindle nose DIN 55029, D1-4 Spindle speed min. 70 rpm Spindle speed max. 2000 rpm Number of spindle speeds / Infinitely variable 8 Longitudinal feed range (40) 0.053–1.29 mm/rev Cross feed range (40) 0.013–0.31 mm/rev Metric thread pitch (32) 0.4–7 mm Inch thread pitch (36) 4–60 TPI Tailstock quill stroke 110 mm Tailstock taper MT 3 Motor power 2.2 kW Motor power S1 100% 1.5 kW Voltage 400 V Dimensions (W × D × H) 1730 × 700 × 1340 mm Weight approx. 515 kg Scope of delivery: - 3-jaw chuck DK11-160 mm / D4 - 4-jaw independent chuck K72-200 mm / D4 - 3-axis digital readout - Service tools - Fixed steady rest – clearance max. 60 mm - Traveling steady rest – clearance max. 60 mm - Faceplate 250 mm - Friction clutch - Micrometer longitudinal stop - Walking system - Motor with magnetic brake in compliance with CE - Foot brake - Thread dial indicator - LED work light - Reducing sleeve - Change gears - 2 live centers - Stand - Partition - Multifix system (4 tool holders included) - Legally required safety guards - Complete technical documentation in Polish - CE Certificate - 24-month warranty for all users at no extra charge

Condition: new, Year of construction: 2026, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 420 mm, turning length: 1,000 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, overall weight: 1,145 kg, Equipment: rotational speed infinitely variable, The Smart 410 Pro Vario Universal Lathe is a professional machine designed for light and medium-duty turning operations. By combining advanced electronics with robust mechanics, this model provides an ideal solution for mechanical workshops, toolrooms, and maintenance departments. Bed made from cast iron, induction-hardened and precision-ground Mechanical foot brake reduces downtime Removable bridge allows machining of larger workpieces Quiet and smooth operation thanks to hardened and ground gear wheels Simple and quick adjustment of feed and speed Solid construction ensures vibration-free performance Sliding tailstock system for taper turning, handwheel with high-precision scale (0.02 mm) Central switching system for feeds and threading, with leadscrew and feed shaft Modern main spindle bearing with precision angular contact ball bearings Hsdpfx Aoyr I Sqjansnr 3-axis digital display included as standard Infinitely variable spindle speed adjustment via inverter with digital display for optimal adaptation to the workpiece Centres distance: 1000 mm Centres height: 210 mm Swing over bed: 420 mm Swing with bridge removed: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle nose: DIN 55029, D1-6 Min. spindle speed: 30 rpm Max. spindle speed: 3000 rpm Spindle speed range - number of steps / stepless: stepless (30–550 / 550–3000) Longitudinal feed range: (17) 0.05–1.7 mm/rev Cross feed range: (17) 0.025–0.85 mm/rev Metric threads: (42) 0.2–14 mm Inch threads: (45) 2–72 TPI Tailstock quill diameter: 50 mm Tailstock quill travel: 140 mm Tailstock taper: MT 4 Motor power: 5.5 kW Voltage: 400 V Dimensions (width): 2090 mm Dimensions (depth): 1050 mm Dimensions (height): 1600 mm Weight approx.: 1145 kg Scope of delivery: 3-jaw chuck DK11-200 mm / D6 Face plate 350 mm Fixed steady rest – max. passage 135 mm Travelling steady rest – max. passage 65 mm Coolant system 4-way tool post Micrometric longitudinal stop Threading dial Magnetic brake compliant with CE standards Electromechanical spindle brake Filled with Shell Tellus 46 oil Halogen work light Change gears 2 centering centres Chip tray Service tools 3-axis digital display Infinitely variable spindle speed Legally required safety guards Full operating documentation in Polish CE Certificate 24-month warranty for all components at no extra cost

Condition: excellent (used), - Maximum turning diameter over bed: 500 mm. Hjdpfxjygy Dus Aanjnr - Maximum turning diameter over gap/bridge: 580 mm. - Turning length between centers: 1500 mm. - Spindle bore: 71 mm. - Spindle speed range: 14–1800 rpm (22 speed steps). - Main motor power: 11 kW. - Machine weight: approx. 3,000 kg. - Equipped with rapid feeds (0.55 kW motor) - Tailstock with Morse taper 5.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 185, turning diameter over cross slide: 800 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning diameter over bed slide: 1,000 mm, turning length: 2,000 mm, faceplate diameter: 900 mm, Potisje lathe PA - 50 - DC. Excellent condition. Steady and following rests included, along with face plate. Cone attachment on the lathe. Hjdpfx Aasww Igmsnonr

Condition: excellent (used), Conventional lead and feed screw lathe from manufacturer Nardini S.A. Máquinas e Ferramentas, model ND 220 SE. Well-maintained machine in technically flawless condition. Technical Data: Machine type: Lead and feed screw lathe Manufacturer: Nardini Model: ND 220 SE Control: Conventional Center height: 220 mm Distance between centers: 1,000 / 1,500 mm Swing over bed: 440 mm Swing over cross slide: 270 mm Swing in gap: 630 mm Gap length in front of faceplate: 200 mm Spindle Spindle nose with short taper size 6, DIN 55027 Spindle bore: 52 mm Internal taper: 1:20 Reducer bush: MT 4 18 spindle speeds: 25 – 2,000 rpm Feed and thread range 132 longitudinal feeds: 0.057 – 2.645 mm/rev 132 cross feeds: 0.028 – 1.322 mm/rev 54 metric threads 54 Whitworth threads 54 module threads 54 diametral pitch threads Leadscrew pitch: 6 mm Carriage & Compound Cross slide travel: 250 mm Top slide travel: 125 mm Max turning tool section: 20 × 20 mm Top slide swivel range: ± 45° Tailstock Quill diameter: 60 mm Internal taper: MT 4 Hodpoypcpxjfx Aanonr Quill stroke: 200 mm Lateral offset: 15 mm Drive Main motor: 3-phase 380 V / 50 Hz, pole-reversible, 3 / 6 kW Coolant pump: 0.09 kW Operational Advantages - Robust machine bed - Very large feed and thread range - Suitable for both single-part and series production - Easy operation - Durable industrial quality Used machine Technically tested Fully functional Ready for immediate use Delivery time: Immediate Ex-works, loaded free of charge Loading: Forklift available Transport / shipping: can be arranged

Condition: good (used), For sale is a heavy-duty industrial lathe TOS TRENČÍN type 16D20 (long-bed version). The machine stands out for its robust construction, smooth operation, and an exceptionally large spindle bore – ideal for shafts, pipes, and large workpieces. Technical Data Machine type: Engine lathe with leadscrew and feed shaft Manufacturer: TOS TRENČÍN Model: 16D20 Control: conventional Max. turning diameter over bed: 400 mm Max. turning diameter over cross slide: 220 mm Spindle bore: 63 mm Max. workpiece length: 1,000 mm Spindle speed range: 8.5 – 2,000 rpm Main drive: 11 kW Hsdeypcy Rjpfx Aansnr Dimensions & Weight Dimensions (L × W × H): approx. 2,880 × 1,270 × 1,605 mm Machine weight: approx. 2,800 kg Heavy, torsion-resistant machine construction Large working area for universal turning tasks Precision spindle bearings Smooth running even at high speeds Suitable for single-piece and series production Used Solid industrial machine Technically fully functional Ready for operation Delivery time: immediately Terms: ex-site, loaded free of charge Loading: no problem Transport / forwarding: can be organized

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. The article produced was only sold during Corona. It is also possible to purchase the complete product. Hsdpfxjvmnkrs Aanonr Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.