Broaching machine

Rausch RS 3/1000

Condition: refurbished (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 3615/673, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 3 mm/s, total length: 750 mm, total width: 800 mm, total height: 2,250 mm, -WR 177- Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3615/673 Year of Manufacture: 1988 Weight: 350kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, partially overhauled, mechanical vertical broaching machine Rausch RS 3 without CE marking Pulling force: 3,000kg Broaching speeds: 3m/min Return speed: 3m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / work area: 430mm x 320mm / 340mm x 220mm Table through-hole: Ø 90mm for standard broaching mandrels "System Rausch" Workpiece diameter: any (with the cabin removed) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with offset tool shank) Dimensions (h x w x d): 2,250mm x 800mm x 750mm (h = including 3-sided protective cabin) Motor: 3.0kw / Power supply: 400V / 50 Hz Equipment: - Protective door with safety monitoring (emergency stop circuit) - Chip chute - Externally adjustable tool length adjustment system (System Rausch) - Protective cover for stroke adjustment and electrical switching units - Electrical sensing of the clamping jaws (System Rausch) (Tool removal control to prevent unintentional retraction of the drawbar, providing additional safety for the operator & tool) - Integrated coolant system - 4-sided enclosed splash guard hood with protective door - Extra reinforced chip basket and chip sieve with magnet insert - Control panel external - 2 grease points for the trapezoidal spindle drive with manual grease gun directly on the spindle nut Note: The machine has been partially overhauled by Rausch. The following wear parts have been replaced and renewed. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - New electrical system - 4-sided enclosed splash guard hood with protective door at the front - New protective door instead of the light barrier in the machine room - New clamping jaws Cjdpfxez Hl U Io Aiisri - All sheet metal parts, such as covers, chip chute, basket, sieve and spindle protection, are new. - External control panel General The double spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 18mm. (from 16mm keyway tools only with offset tool shanks) Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Due to the structurally universal design of the drawbar and the machine table, broaching with profile and flat broaching tools is possible without the use of additional draw heads.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Csdpfxsxfka Nj Aiieri Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: good (used), Year of construction: 1984, Grinding wheelhead: - motor power : 2,2 kW - spindle speeds : 1 000 - 8 000 rpm - spindle inclination (A-axis): -10° up to +27° Csdpfx Aovmpabjiisri - setting accuracy 1 min - height adjustment (Y axis) : 130 mm - stroke range (X axis) : 220 mm - oscillation stroke, steplessly adjustable during oscillation : 0-30 mm - oscillation frequency : 30/60 1/min Workhead: - radius setting (Z axis) : 0.01-50 mm - setting accuracy: 0,01 mm - retraction of slide from the grinding to the measuring position : max. 49 mm - cross table, clamping surface : 155 x 205 mm - travel X - Y : each 60 mm - maximum swivelling angle (B axis): 260° - supply voltage : 380 V - weight : 1200 kg Accessories/options: - grinding pressure variable - projector fixed in measuring position - 1 cabinet with accessories - different grinding wheels, flanges - coolant tank - documentation Under power in our warehouse.

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Crsdpfx Asf Hmn Aoiiei Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Csdpoxg Rhvefx Aiiori

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) Crodpfjr A Hcbsx Aiiji - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: used, Year of construction: 2018, operating hours: 23,532 h, functionality: fully functional, turning length: 550 mm, spindle motor power: 31,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, torque: 170 Nm, bar passage: 65 mm, total height: 2,490 mm, total length: 6,910 mm, chuck outer diameter: 160 mm, total width: 2,092 mm, bar diameter (max.): 65 mm, spindle nose: 140, overall weight: 9,000 kg, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC lathe, manufactured in 2018, from our own machine inventory. The machine is fully functional and can be inspected and demonstrated in operation at our location. The C200 features extensive equipment, including a main and counter spindle, three tool carriers, and driven tools, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2018 - Control system: INDEX C200-si based on Siemens Sinumerik 840D SolutionLine - Main spindle D65 Csdpfjz Hmxnsx Aiieri - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool carriers - 14 stations per tool carrier - Driven tools - Y-axis on tool carriers 1 and 2 - C-axis on main and counter spindle - Coolant high-pressure supply - Chip conveyor - Part removal / gantry removal system - Interface for bar loader magazine UNIMAG4 - iXpanel operating interface - Connection: 400 V / 50 Hz - Rated power: 54 kW - Connected power: 65 kVA - Rated current: 94 A - Max. fuse rating: 100 A The equipment with three tool carriers, a main and counter spindle, and the existing automation and peripheral technology enables flexible and productive complete machining of series parts. The technical configuration is documented in the original INDEX order confirmation. 20260930101605 Current operating hours according to the machine control system: - Total operating time: approx. 23,532 h - Hydraulic system: approx. 22,288 h - Spindle/drive operating times according to the operating hour counter: - S1: approx. 2,298 h - S2: approx. 4,189 h - S3: approx. 1,954 h - S4: approx. 5,998 h - S5: approx. 8,006 h The machine is currently located at our facility and can be inspected and demonstrated in operation after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed list of equipment upon request.

Condition: not inspected (used), Please see technical details on photo. Crodpfxohvzxzo Aiisi

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Codpfxoz A Ah Rj Aiieri Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: excellent (used), Year of construction: 2024, operating hours: 20 h, turning diameter over cross slide: 300 mm, turning length: 1,350 mm, turning diameter: 510 mm, spindle bore: 50 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 7,500 W, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, rotational speed (min.): 2,500 rpm, quill travel distance: 160 mm, quill diameter: 75 mm, quill stroke: 160 mm, swing diameter over cross slide: 300 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, workpiece weight (max.): 600 kg, turning diameter over top slide: 300 mm, overall weight: 2,700 kg, mount diameter: 40 mm, Equipment: documentation/manual, Style CNC is a company specializing in the manufacture of CNC lathes and milling machines for single-piece or small-batch production. If you operate a tool shop, prototyping center, or provide services with very fast turnaround times, Style is an excellent solution. The intuitive graphical software allows you to create a program directly on the touch screen of the machine in just a few minutes. We currently have a demo machine for sale with a limited number of dry run hours. The machine is sold with a full 12-month warranty, including commissioning and training. In Poland, Style CNC has its own dedicated service branch. Crjdjw Eum Aspfx Aiioi