saw blade width until 300 mm, 5 blade supports 2,1 m high inclusive 10 rollers and 4 adjustable guide rollers, heavy tensioning machine movable by spindle drive, tensioning rollers new grinded by Prinultini, large anvil 600 x 250 mm, including adjustable guide roller hollow saw blades can be rolled out, blade length 8,0 until 15,0 m
Bdcgyjgpqq
Works fine, with a few extra saw blades
Bmb9mxv3ls
AVOLA - CIRCULAR SAW BENCH GAMA65K
for cross and mitre - cutting
Of22mpfj9
- The modular GAMA system for your individual wood working needs -
Technical equipment Motor output 10 kW - direct - Motor speed rpm 3.000 / sawblade speed rpm 3.000 Height of sawblade at 90° / 245 mm - 45° / 164 mm - 30° / 113 mm Electrical sawblade inclination 90° - 30° with digital readout
Revolving table 30° - 150° Automatic clamping hood Pneumatic cross-cutting operation / Laser light for cross-cutting TCT – sawblade...
Double head long cutting machine.
Bench Saw
Bgxph0er9y
For more details please contact us via email or phone
reconditioned roll saw stretcher and tensioning bench for max. 230 mm blade width, with 2 new roll saw stretcher rolls and switch for 2 speeds, 3 new blade guide supports in pipe welding construction with 9 new synthetic support rolls for 210 mm blade width, new bench construction with Mulitiplex plates, anvil 200 x 200 mm, with new longitudinal and transverse ruler, with new ball and cross hammer
Bfjis80dkh
Your employees achieve more
Bitijl0nc3
• Standard size 1 .0 x 2.0 Meter
• Ergonomic design.
• Robust concrete table to reduce noise.
• Nailing tacker within reach (by acentral arm and a spiral tube).
• Lighting with clear light directly at the work space
• One central connection for electricity and pressed air.
• The frame also serves as a buffer tank for compressed air.
Option;
• Two drawers for storing nails.
• Balancer for 4.5 – 9 kg or 2.5 - 5 kg.
• Little table for second tacker.
There ar...
VOLLMER VRB / I straightening bench and VWM rolling machine in good condition
- Year of construction: 1990
- Band length: 8.5-11.5m
- bandwidth: max. 230mm
- bench length: 3m
- Bank width: 0.5m
- Feed speed: 9.5 / 15 m / min
- Number of rolls: 4
Cupb722
Works perfectly, video of the function can be sent
For framing.
Year of manufacture 2011, start-up in 2012.
Cutting capacity: 1500
Visible.
Gw0ajc
Band saws Straightening bench and rolling machine
Brand: Vollmer
guy:
Year of manufacture:
Vsynyu
Condition: Very good (used)
Arm Saw OMGA RADIAL ARMS 900
Manufacturer OMGA
Model / machine type RADIAL ARMS 900
Year of production 2002
Machine category Arm Saw
Location
Gorzów Wlkp.
Conditions of delivery
Bztda9qy
own collection
Cost of delivery
Customer cover
Contactor, semiconductor contactor, contactor
-Max. 30 kW 660 V
-Price: per piece
-Number: 18 pieces available
Js3pwi
-Weight: 2 kg
PROTEC PLANET SAW NTV 160
Application: cutting and chamfering of plastic pipes made of PVC, PP, PE
Year of construction: 2011
With central clamp
Cutting of short lengths up to
100 mm
The saw is in a very good condition
Nx0uf
Saw formatting panel Saw TT45/2500T
Odppx
trolley length 2500 mm
4 kw engine
saw speed 4000/6000 RPM
undercutter with a 0.75 kw motor
angled adjustable saw
production year 2009
overhead protection
the weight of the machine: 610 kg
Miter saw OMGA V235 NC
Double miter saw, V-Cutting OMGA V 235 NC
Type / Model: V235 NC
Bnp3jsbium
Production Year: 2007
Technical condition: Perfect, like new!
Technical description:
The V235 NC is a high speed precision saw for picture frame, carpentry and furniture industries. It is equipped with an on-board computer that allows it to operate in various cutting modes. The machine is able to cut out of random material lengths and can also optimize sequence cuts in list mode.
The computer has ...
Contactor, semiconductor contactor, contactor
-Max. 11 kW 660 V
Hyj0jkj
-Price: per piece
-Number: 180 pieces available
-Weight: 0.5 kg
saw double edger WALTER SPIERING TRKR 700
Location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
Cost of delivery
G00rx8o
Client cover
startup type
negotiated
Description
Comments
Dwupiła for cutting logs maximum diameter of 36 cm diameter blades discs 700 mm x 2 power motors drank 17,5kW x 2 also feeder timber .IMPORTANT chain saws to cut wood sliding round .minimalny size of 10 mm maximum spacing of 36 cm saw for cutting wyżynków , logs length 3000 mm the machine after kapitalhym r...
double saw motor 22 kW cutting height 330 mm cutting length of 2.6 m at the dogs feeder saw blade diameter 700 mm shaft with spacers and the pressure plates feeder machine perfectly suitable for pulpwood, new tensioners, new chain new bearings, new electrical, new feeder machine safe with all the security machine with a simple-to-use design and service firm in addition to the price of two new slitting saws to 700 mm
Cutting Length mm 2600 mm
Length Machines mm 6100 mm
Table length 2000 mm
Spind...
SAW MACHINES FOR FOAM FISCHER TORSO 1140
The manufacturer FISCHER
Model / type of machine TPRSO 1140
H2kavet
Year of manufacture 1978
With sliding table
ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs
cost of delivery
cover customer
Startup type
R9uzikcv7
negotiated
Description
Notes
Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of m...
Rip and cross saw REMA DMLK 30
Producer of REMA
Machine model / type DMLK 30
Year of production 1997
Machine category Longitudinal and transverse saw
Location
Gorzów Wlkp.
Conditions of delivery
PERSONAL COLLECTION
Cost of delivery
Customer cover
Startup type
to be agreed
Blomrmqleg
Description
Comments
- after the technical review
- very good condition
- year of production 1997 TECHNICAL PARAMETERS:
main engine 3.9 kW
trolley length 1370 mm
blade diameter 300 mm
angle adjustment 0 - 45 "...
Saw REMA DMRT 300
Location
Gorzów Wlkp.
Conditions of delivery
PERSONAL COLLECTION
Cost of delivery
G3utjprlo
Customer cover
Startup type
to be agreed
Description
Comments
Producer of REMA
Machine model / type DMRT 300
Year of production 1999
Machine category Kapowa saw Location
Gorzów Wlkp.
Conditions of delivery
PERSONAL COLLECTION
Cost of delivery
Customer cover
Startup type
to be agreed
Description
Comments
Properties
Circular saw diameter O 300 mm
Max. sawing width at a height of ...
Drilling machines Eugen Mayer 715 Second hand 1998
Make:
Eugen
Model:
Mayer 715
Description:
dauble saw with boring system eugen mayer
Year:
Jfdds7p
1998
Producer HORST BREHM
Machine model / type TK 300
Year of production 1989
Machine category Kapowa saw
Location
Gorzów Wlkp.
Conditions of delivery
PERSONAL COLLECTION
Cost of delivery
Customer covers
Startup type
to be agreed
Description
Bl0bhdaq
Comments
PNEUMATIC DRIP SAW, START WITH A PEDAL
Kap Saw Reinchardt NC 700 automatic
Manufacturer Reinchardt
Model / machine type NC 700
Year of production 1998
Machine category Kapła Kapowa
Location
Gorzów Wlkp.
Conditions of delivery
OWN RECEIPT
Cost of delivery
Customer cover
H8uf7cg
Start type
to be agreed
Description
Comments
CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT
HOLZMANN HBS 500 band saw
Manufacturer HOLZMANN
Model / type of the HBS 500 machine
Production year 2014
Machine category Band saw
Location
Iejqh3r
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Cost of delivery
Customer cover
Startup Type
to be agreed
Description
Comments
2.2 kW ENGINE, 500 mm WHEEL DIAMETER, TABLE SET AT ANGLES, VERY GOOD CONDITION, ADDITIONAL SAWS AS TOOLS
Band saw Berg & Schmid
Dxxkfe
Type: GBS 230 Super
Year of manufacture: unknown.
Cutting range: at 90° round 230mm, square 230x230mm,rectangle 280x150mm.
At 45° left: Round 200mm, square 180x180mm.
At 45° right: round 180mm, square 155x155mm.
Cutting speed: 40 / 80 rpm.
Saw blade dimension: 2755x25x0,9mm.
Power requirement: 400 Volt 1,5 / 1,8 KW.
Coolant device.
Instruction manual.
Space requirement: L 140cm, W 90cm, H 160cm + roller conveyor L 350cm.
Double mitre saw DG 244 6,0m/ D= 550mm + E 580/3 - 22,5°/ 140°
Discription:
The reliable elumatec principle “Cutting from below”:
- Provides unhindered access to support table
- A large saw blade diameter and optimal use of the saw blade offer an ideal cutting capacity for all cutting variations
- Standard for elumatec: External dimension cuts at all angle positions.
- This means no length calculations are necessary when cutting profiles of different heights
- The universal pivoting and tiltin...
cutting diameter: 455 mm
saw band length: 4120 mm
saw band width: 55 mm
table height: 600 mm
square: bei 90°: 455 mm
electrical connection: 380 / 50 V / Hz.
total power requirement: 7,9 kW
weight of the machine ca.: 3,2 t
space requirements of the machine approx.: L:3,8xB:2,3xH:2,1 m
Fully Automatic 2 Column Bandsaw
- bandsaw speed: 16-35;35-60;60-80;80-100 m/min
- cutting feed adjustable
- worpiece clamping hydraulic
- worpiece feed automatic
equipment:
- roll conveyor, coolant device, swarf c...
Construction circular saw, circular saw
-Max. Cutting height: mm
-Dimensions: 885/670/H810 mm
-Weight: 42 kg
Gxs88wl
cleaned, function tested, test run
new parts:
V-belt, support table, return spring
used, good condition
manufactured by Graule
type ZS 135 N
built in 1984
motor 2 kW
Ok8md
tiltable right hand to 65°
tiltable left hand to 45°
tiltable to 45°
underframe
fence aus aluminium
exhaust connection D 100 mm
required space ca. 1000 mm x 1000 mm x 1400 mm
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
Used machine
Year of manufacture 1997
5462 Operating hours
cutting length 3200 mm
cutting width 2850 mm
max. cutting height 60 mm
P8hezv
Main saw blade 300 mm
Main saw motor 5,5 kW
Scoring saw blade 180 x4.4/5.4 x 30
scoring motor 1,1 kW
Fence speed forward and return 15 m/min.
Feed speed saw carriage 15 + 30 m/min.
Return travel of saw carriage 30 m/min.
Control SPPA10
Memory space for 10 programs
Availability: approx. April/May 2021
Location: Wetzlar/Hessen
saw blade diameter 90 mm
cutting diameter 140 mm
Bie7qexsho
miter ja
voltage 380 V
ja
weight of the machine ca. 300 kg
bore capacity in steel (diameter) 13 mm
throat 245 mm
bore stroke 100 mm
spindle taper B 16
table surface area 360 x 250 mm
spindle turning speed range 200 - 3200 U/min
Ocegd
column diameter 80 mm
distance spindle /table 110 - 465 mm
height adjustment 355 mm
total power requirement 0,5 kW
weight of the machine ca. 0,1 t
dimensions of machine L x W x H 0,7 x 0,6 x 1,63 m
- on rack -
Accessories: drill chuck RÖHM 1 - 13 mm
cutting width: 2000 mm
Cutting height: ca. 160 mm
saw blade diameter: 440 mm
passage between the side columns: 3000 mm
total power requirement: ca. 4,0 kW
weight of the machine approx.: 1800 kg
dimensions L x W x H: 5,0x0,9x1,95 m
Circular Saw for sandwich panel elements
operation area:
- straight cuts of PU- Foam with steel- or Alu lamination; or/-and cutting of solid wood plates
- 2 opposite slides with moveable sawing units
- passage inside frame: 3000mm
- support of the backside sawing tab...
Saw roller block, saw roller block, sawhorse, roller conveyor block
-for: hacksaw, band saw, cold circular saw
-Roller height: 850 - 1500 mm adjustable
-Roll: Ø 80 x 840 mm
-Plate below: Ø 480 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 915/480/H850 mm
-Weight: 44 kg/piece
28vxenwb
used, good condition
manufactured by Scheer
type FM 2 - 3000
Masch.-No. N 199/09
motor 1,5 kW
cut length 3000 mm
hand wheel clamping
rip fence
Bn0pu77p9c
rear extented table
moveable
required space ca. 3500 mm x 1000 mm x 1300 mm
weight ca. 350 kg
total connected power ca. 1,5 kW
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen, function checked
without revision
Robland sliding table saw used swivelling
O0kol
trimming length 3200 mm
max cutting height 125 mm,
main saw 5,5 KW, 0-45° tiltable,
foresaw 0,75 KW ,
speeds 3000/4000/5000 rpm,
exhaust diameter 120 + 60 mm,
some saw blades available
Location: ex stock 54634 Bitburg
- free loading-
Subject to prior sale
1 fired double grinding stand
Mnuirefh
grinding wheel dimension 150 x 25 mm
weight approx. 50 kg
roll diameter 420 mm
throat 410 mm
workpiece height 265 mm
Beombkd7ow
table-size 600 x 600 mm
cutting speed 12 - 375 m/min
turning speed range 39 - 1230 U/min
saw band length 3150 - 3260 mm
width of saw-band 3-16 mm
voltage 380 V
total power requirement 1,7 kW
weight of the machine ca. 620 kg
dimensions of the machine ca. 1,00 x 0,80 x 1,90 m
welding equipment IDEAL
air blow equipment
- S/N: 21486 - 74 / 41
- IDEAL Welding unit
- Grinding wheel
- Machine lamp
saw blade diameter: 450 mm
revolution per minute: 2820 U/min
cutting lenght max.: 5000 mm
Ytpw09gm
cutting length min.: 240 mm
air pressure - required: 6-8 bar
hole of sawblade: 32 mm
mitter cutting - both sides: 45+90 °
total power requirement: ca. 4,6 kW
weight of the machine ca.: 1,1 t
dimension machine xH: 6,05x1,49x1,79 m
- cutting diameter can be seen in a cutting chart of the machine
- clamping pneumatic and horizontal
- pneumatic mist spraying device
- adjustable machine base stands
- m...
Cold circular saw, metal circular saw, metal miter saw, semi-automatic vertical metal circular saw, semi-automatic vertical metal circular saw
-semi-automatic cold circular saw: with roller conveyor and programmable digital stop
-Saw blade diameter: 350 mm
-Speeds: 17/34 rpm
-Motor power: 1.5 / 1.9 kW
-Stop working length max .: ca. 1500/1700 mm
-Miter cuts: up to 45 ? left 45 ? right
Blops2a00n
-with coolant device
-Installation dimensions: 5300/1200 / H1900 mm
-Transport dimensions:...
bore capacity in steel (diameter) 18,0 mm
Gcyviv7
throat 215 mm
bore stroke 100 mm
spindle taper 2 MK
table: 310 x 220 mm
turning speeds 200 - 1800 U/min
column diameter 75,0 mm
range L-W-H 300x800x1050 mm
total power requirement 0,65/1,2 kW
cutting diameter 250 mm
saw band length 3380 mm
table height mm
throat 500 mm
cutting speed 15 - 900 m/min
table-size 600 x 600 mm
total power requirement 1,1 kW
Bnhxt3sjrw
weight of the machine ca. 0,8 t
dimensions of the machine ca. 1,0 x 0,8 x 2,1 m
1 used automatic band saw, make Danobat, type CR 330 A, year 1998
Technical data:
E73prvq2k
Automatic double column saw DANOBAT mod. CR 330 A.
Maximum shaft diameter (90 degree cut) 330 mm
Minimum band saw blade speed 14 m / min
Band saw blade speed 105 m / min
Total power requirement 3 kW
Machine height 1878 mm
Machine width 1727 mm
Machine length 2438 mm
Machine weight approx. 1,7 t
cutting diameter 420 mm
saw band length 6300 mm
cutting speed 20-130 m/min
cutting width at rectangle material 420x420 mm
Bd7eaqy90
cutting pressure einstellbar
chip conveyor
weight of the machine ca. 3 t
feeds slides 7mm Rollenbahn
Control
total power requirement 8 kW
saw blade diameter: 250 mm
I3ejmxz
cutting diameter: 60 mm
stroke : 170 mm
revolution per minute: 57 U/min
total power requirement: 0,8 kW
weight of the machine approx.: 71 kg
space requirements of the machine approx.: L:0,8 x B:0,45 x H:1,0 m
cutting area with 90°:
- pipe: 80mm; Flat:95x60mm;
cutting area with 45°:
- pipe: 70mm; Flat:65x60mm
- mitre cut is possible
- workpiece holder mechanic
Machine is on sale as is with bearing damage, spare part deliverer or repair!
Tooth broken of gear.
Wiefelstede, Germany