Used horizontal band saws - manual - cutting range 221-299mm for sale (79)

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Gsdpfxofibfgj Ahvsip Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. Gjdpfoficb Tsx Ahveip - Vertical rotation on pivot with adjustable conical bearings without backlash - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable stop for cuts of the same size - 24 V low voltage system - 0.06 kW electric pump for belt cooling - Pedestal with drawer for chips collection and extractable tank for the cooling liquid - Machine predisposed

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional double mitre band saw manufactured by Bauer Maschinenbau GmbH. This machine stands out for its robust construction, precise cutting results, and high reliability in daily operations. The band saw is currently under power and can be demonstrated by arrangement. Technical Specifications: Cutting capacity: - 90° round: 280 mm - 90° flat: 320 × 230 mm - 45° flat: 220 × 230 mm - 30° flat: 130 × 160 mm Cutting angle: - 45° – 0° – 60° Saw blade: - 3000 × 27 × 0.9 mm Band speed: - 30 – 60 m/min (steplessly adjustable) Dimensions (L × W × H): - 1700 × 700 × 1400 mm Gsdex Uxruspfx Ahvoip Condition: - Used - Technically flawless - Immediately ready for operation If interested, we are always available for further information or to arrange an inspection.

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm Gedpfog U Uv Rjx Ahvjip 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.1 kW (1.50 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,700 mm, total length: 1,400 mm, total width: 685 mm, overall weight: 200 kg, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 225 mm, cutting range square steel at 45°: 150 mm, cutting range square steel at 90°: 190 mm, saw band length: 2,480 mm, saw band width: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Cutting speed --- 45 - 90 M/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDING * Adjustable material clamp * Graduation up to 60 gr. Godpfsga Tzqox Ahvoip * Automatic shut-off * Low-noise electric motor * Closed worm gear transmission * Hydraulic pressure control * CE emergency stop * Cooling pump * Base cabinet * Quick-release clamp * M42 Bi-metal saw band

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, The USED MACHINE KASTO 260/400 U is a single miter band saw capable of cutting round material up to a diameter of 260 mm and square material up to 260 x 400 mm. Material is fed and clamped manually. The saw frame is raised hydraulically, while the cutting feed is performed automatically by a hydraulically controlled downfeed cylinder. Infinitely variable cutting speed via variator gearbox. Technical Data: • Cutting range: 90° round: 260 mm; rectangular: 260 x 400 mm 45° round: 260 mm; rectangular: 260 x 260 mm • Motor power Power supply approx. 3.2 kW / 400 V / 50 Hz Saw motor approx. 2.2 kW / 400 V / 50 Hz • Blade speed 18 to 110 m/min. (stepless) • Working height 835 mm • Minimum remnant piece length approx. 20 mm (90°) • Saw blade 4310 x 27 x 0.9 mm • Dimensions (in operation) 2410 x 1805 x 913 mm • Weight 920 kg Standard Equipment Gedpfx Asx Sx D Ejhvjip • Hydraulic control of the cast iron saw frame • Saw blade drive via variator • Stepless saw blade speed adjustment from 18 to 110 m/min • Saw frame height limit • Driven chip removal brush • Electric blade tension monitoring with blade breakage detection • Carbide saw blade guides and guide rollers • Cutting pressure regulation (solid material – tube) • Sturdy base with coolant tray • Bi-metal saw blade M 42

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: A 23020337, functionality: fully functional, Manual tilting frame metal band saw with hydraulic saw frame lowering for mitre cuts from 0 - 60 ° right The compact machine has a manual vice with quick-release lever. The saw frame lowers at an infinitely variable speed. The machine is switched off by a limit switch when the saw cut is complete. Another limit switch monitors the saw blade tension. An ergonomic control panel enables safe and easy handling of the LZ 280 S. Features: - Professional band saw for use in workshops, metalworking shops, etc. - For cutting hollow profiles and solid materials, stainless steel, tool steel, ... - Saw frame sturdy cast iron construction - 2 cutting speeds for versatile applications - Flow regulator to regulate the lowering speed of the saw frame - Smooth, low-vibration operation thanks to the use of high-quality materials - Robust cast iron vice with quick-release lever - Ergonomically arranged control panel - Mechanical saw blade tensioning with electrical blade monitoring Equipment: - M42 bi-metal band saw blade - Mechanical band tensioning with electrical band monitoring - Carbide plates for precise blade guidance - Manual vice with quick clamping lever - Coolant device - Motor protection switch - Automatic limit switch - Workpiece stop - Emergency stop button Technical data: * 400 V three-phase motor 0.75/1.1 kW * 2 cutting speeds (33/66 m/min) Giodpfx Ahjvgbatsvsp * Vice clamping width 250 mm * Working height 925 mm * Saw blade dimensions 2450x27x0.9 mm * Weight 255 kg Cutting range in mm: 90° 220 215x215 250x155 45° R 160 150x150 160x110 60° R 100 85x85 80x95

Condition: new, Sawing band --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 M/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90 ----- 270 mm / 260 x 320 mm Cutting capacity 60 ----- 140 mm / 140 x 140 mm Cutting capacity 45 ----- 230 mm / 220 x 220 mm Cutting capacity -45 ---- 200 mm / 220 x 150 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Quick Release Clamp Cooling pump Hydraulic cylinder Gedpfx Aoga Tzujhvsip Motor protection switch Automatic end stop

Condition: new, ROGI SAWING MACHINE TYPE CY300N INVERTER Sawing dimensions ----- 2750 x 27 x 0.9 mm Cutting speed ----- 20~80 m/min Engine power ----- 1.5 KW ( 400V ) Weight ----- 350 kg Cutting capacity 0 255 mm 200 mm 200 x 320 mm Cutting capacity 45 195 mm 195 mm 195 x 200 mm Cutting capacity 60 125 mm 125 mm 120 x 130 mm Giedoga T Euopfx Ahvep Cutting capacity -45 200 mm 170 mm 170 x 200 mm INCLUDED Adjustable material clamp Angle adjustment up to 60 degrees Automatic switch off Low-noise electric motor Closed worm gear transmission Hydraulic pressure control Rotatable undercarriage 45 gr. Emergency stop Cooling pump Support box Quick Release Clamp 1 Saw blade mounted

Condition: new, Motor power: 1.5 kW (400V-3PH) / 1.5 kW (Inverter) Cutting capacity 0°: Ø 255 mm ■ 200 mm █ H200 x 340 mm Cutting capacity 45°: Ø 220 mm ■ 200 mm █ H200 x 220 mm Cutting capacity 60°: Ø 135 mm ■ 135 mm █ 135 x 135 mm Cutting capacity -45°: Ø 220 mm ■ 200 mm █ H200 x 135 mm Blade speed: 35/70 m/min / 20~80 m/min (Inverter) Blade dimensions: 2750 x 27 x 0.9 mm Weight: 390 kg Gedex Rkpkopfx Ahvsip Dimensions: 1750 x 770 x 1600 mm

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice Giedpfx Ajcuntzjhvop - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Year of construction: 2022, condition: new, Double mitre band saw with automatic Cutting function for mitre cuts left up to 45° and right up to 60° (30°) Cutting range Ø 230 mm Drive power 1.1 /1.5 kW Working height 760 mm Saw blade 2,720 x 27 x 0.9 mm belt speed 40+ 80 m/min Connection 3 x 400V/50 Hz incl. - Ergonomic operation - Monitoring the saw blade tension - Quick vice adjustment - Coolant device with chip collecting trough Machine dimensions: length - 1 520 mm / width - 1 150 mm / height - 1 670 mm weight - 330 kg Gedpfx Asfkixujhvoip incl. 1 bimetal saw blade M42

Year of construction: 2023, condition: new, The stationary mitre band saw machine for universal use. Function: - manual or semi-automatic Design: - Solid cast saw frame - Saw frame can be swivelled over the material - Robust vice with quick clamping lever - Large cutting range - Saw band guides made of steel with ball bearings Gjdpfx Ahjg Hy Tqjvsip - Chip clearing brush - Hydraulic display of saw band tension - Electric coolant device Technical data: - Mitres from 0° to 60 - Cutting speed 45 and 90 m/min. - Machine weight 200 kg - Saw drive 1,1 kW - Saw blade dimension 2480x27x0,9 mm Cutting range at 90 Ø 225 or 240x160 or250 x110 mm

Condition: as good as new (ex-display), Year of construction: 2023, Manual miter band saw for Miters left up to 45° and right up to 30° cutting range Ø 230 mm or 230 x 230 mm drive power 1,1 /1,5 kW saw band 2.720x27x0,9 mm band speed 40/80 m/min Gijdpfx Ahskhbg Usvjp connection 400V incl. - Ergonomic operation - Monitoring of saw band tension - Quick vice adjustment - Coolant device with chip collection tray

Condition: good (used), Year of construction: 2012, Band saw is in good working condition. Gijdpjxvnh Eefx Ahvsp

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Gsdpfjrah S Hjx Ahvsip Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: new, - 2 speeds - Miter - Hydraulically adjustable cutting pressure Gisdpfx Ajrt Rp Hohvjp - Quick clamping clamp - Cooling system - Automatic output - Saw blade 2455 x 0.9 x 27 mm - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2021 102 14, Offer 25300 Technical specifications: - Manual band saw - Saw band dimensions: 2750 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: N 15 / 90 m/min - Max. clamping capacity: 355 mm - Mitre adjustable left and right up to 30° - Cutting range: - 90°: Gedpsxup Ttofx Ahvoip - round: 255 mm - square: 190 mm - flat: 310 x 190 mm - 45° left & right: round 215 mm - Drive: 400 V / 1.5 kW - Coolant system - Weight: approx. 350 kg - Space requirement: approx. W 700 x H 1600 x D 1700 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 8680 € 167.52 € Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1550 mm 1400 mm 1900 mm 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper Gijdpfjwirpvex Ahvjp 2 speeds coolant equipment

Condition: new, Year of construction: 2022, 230 mm Gsdpfxjwp Tmie Ahvoip 2730 mm 320 mm 230 mm 320x130x mm

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm Giedpfx Ajnlbmzshvep voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2.725 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1 kW Giodpsfgyh Hsfx Ahvsp weight of the machine ca. 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2024, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring Gedoftmxvopfx Ahvjip * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Standard Equipment: ● Powerful saw blade drive Gijdpfx Aomftv Rshvop ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Condition: used, Year of construction: 1970, cutting diameter 250 mm saw band length 3660 mm cutting width 1,3 mm clamping range Länge 450 mm clamping range Höhe 250 mm cutting speed 20 - 70 m/min cutting capacity stufenlos mitter cutting - all-position 45 ° Giedpfxoxc Nwuo Ahvep voltage 380 V frequency 50 Hz power capacity 0,55 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,0 x 1,6 m coolant device