Bandsaw machine

Rogi CY350RN INVERTER

Condition: ready for operation (used), Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Fjdpfx Adov Uqcgepofw

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Fjdpfx Adewuurwepjfw Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, Ffedpsvfdatefx Adpew potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: new, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor Ffodjucqquspfx Adpjw - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Ffjdpfod Du T Iox Adpsw Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Ffjdpfxega Tzxj Adpow Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Hydraulic bag cylinder Motor protection switch Automatic end stop

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Fjdpferah S Hex Adpofw Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Ffsdjg U Uv Repfx Adpew Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, Fsdpfjhpktvex Adpofw - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Fsdpfegculvsx Adpefw Please do not hesitate to contact us.