Bandsaw machine

Rogi CY270N

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Isdpfx Ajw Hx Rzofuoba Control Esa S630 control Including Wila Sealing stamp

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body Ibedpfx Afslb I Dasuoa - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: new, Boring power 35 mm turning speeds max. 810 U/min core drilling diameter max. 35 mm tool taper Weldon 19,05 mm bore stroke 210 mm weight 11 kg connected load frequency 230 V engine output 1,6 kW Dimensions (LxWxH) 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. Iedpfxjidabvo Afueba MAGNET HOLDING FORCE 1800 kg

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder Iedpfxeudi Une Afueba BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical specifications: - Cutting range at 90° (round): 260 mm - Cutting range at 90° (flat): 450 x 240 mm Iodpfsgin Ndjx Afuoba - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure, infinitely adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Isdpfx Aey E S D Eefusba

Condition: used, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Ibedpfx Aowzzgnofuea Subject to price changes, errors, printing and typographical mistakes excepted.

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm Iodpfxou Sblws Afusba workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Ibodpfxjy Icbao Afuoa

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Ibsdepr Uvrspfx Afuea