Used Horizontal band saws - half-automatic - cutting range 0-300mm for sale (112)

Condition: new, cutting diameter 227 mm Cjlip T Dsfgyh Ejtegt saw band length 2455 mm table height 840 mm cutting width 260 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2455 x 27 x 0,9 mm capacity 90 degrees: round 227 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 260 x 220 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 45 degrees: flat 200 x 220 mm total power requirement 1,5 kW weight of the machine ca. 0,25 t dimensions of the machine ca. 0,8 x 1,4 x 1,5 m Miter band saw - automatic cut - Base frame - Coolant pump - Chip brush for cleaning the saw band - Vise with quick adjustment

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm Cjlipjfgyh Ne T Dtegt The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm table height mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg dimensions of the machine ca. m Basic equipment: Vice with quick adjustment and adjustable guide bars Colip Tsfg E H Ns Dtsgt Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button Cgjlofgyh Seip T Dtot - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor Cgolisfg E Hpjp T Dtst are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m Cgslipofg E H Te T Dtet How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, capacity 90 degrees: round 250 mm Celjd Iip Roip T Dtjgt capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Celip T Defg E H Iotegt Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Cjlip T Djfg E H Sstogt Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 195 kg dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering Celishpktrjp T Dtogt • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved Cgjlip T Defgyh Rstjt - Quick release lever - Automatic cooling

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: Cgsliofg E H Usp T Dtot New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.