Band saw

FLOTT HBS 230 ANC (NEU ab Werk)

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Djdjh Hd A Sopfx Ab Tecr Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2023, condition: new, Very robust and easy to use semi-automatic hydraulic double mitre band saw. Hydraulic saw feed and saw pressure separately adjustable, Vice can be operated hydraulically and manually, Djdohaq D Iepfx Ab Tocr 2 saw band speeds as standard, material stop swivelling Coolant device and chip container Main technical data: Sawing length up to 450 mm Sawing height up to 320 mm Saw diameter up to 330 mm Power 2,4 KW - 4,0 KW dimensions lxwxh 2050x1180x1550 mm Illustrations (photos) with options Also available in other sizes (260 and 320 mm) Ask for a non-binding offer. We offer delivery, service, spare parts and saw bands from one source. Our postcode areas in Germany are 17,18,19,23

Condition: new, Shaft diameter: 50Upper Roll Diameter: 152Bottom Roll Diameter: 162high performance hydraulic: 8working speed: 4,5motor power: 1,1length: 810width: 950heigth: 1500weight approx.: 500 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- Dsdpfx Abed Ab H Se Tecr - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Year of construction: 2023, laser power: 8,000 W, Fiber laser machine HLF from stock, available for short notice. We have to test an identical machine under power. Power: 8kW Sheet format: 3000 x 1500mm Automatic changing table including ball rollers for scratch-free workpiece positioning Siemens touchscreen control with LAN/USB Siemens drives Precitec Auto Focus Procutter cutting head Sheet metal measurement IPG resonator with 8kW / alternatively MAX Photonics Small parts conveyor belt will include: guarantee CAD/CAM software Installation Dcsdpfx Asqgcwtob Tjr Delivery (within Germany) Donaldson suction Training offered The machine is a stock machine and is therefore available at short notice. We already have 300+ similar and identical machines under power in Germany and Europe. Reference visits to users are possible at any time. Give us a call !

Condition: used, Year of construction: 2003, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 14 Stück no. of strokes max. 15 Hub/min cutting angle 1°15 work height max. 770 mm column arm 350 mm oil volume 170 ltr. control ENC 100 total power requirement 15.0 kW weight 7500 kg range L-W-H 3850 x 2200 x 1950 mm Equipment: - NC electro-hydraulic swing beam shear - DURMA "ENC 100" digital control unit * Operator control, pivoting to the front left Dcjdpfx Asxacdisb Ter - NC electro-motorized backgauge * Travel = 1.000 mm (X axis) * On recirculating ball screws - Manual quick cutting gap adjustment * Via eccentric (right side column) - Machine column with overhang (350 mm) - 1x extra-long side stop, with mm scale - 2x front support arms, with mm scale - Ball transfer units in the front support table - Front hinged finger guard - 1x freely movable foot switch - Rear safety device (protective grid) - 2x emergency stop buttons at the front - Operating instructions (PDF)

Condition: used, Year of construction: 2006, pressure 160 t chamfer lenght 3550 mm distance between columns 3100 mm dayligth 395 mm stroke of upper beam 200 mm throat 350 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 950 mm table width 125 mm Control CYBELEC DNC 60 oil volume 150 l total power requirement 15.0 kW weight 10800 kg range L-W-H 4700 x 2100 x 2700 mm New price ~ €80,000 From a maintenance workshop In good condition (!!) - in checked conditions - machinevideo - ?v=L6bUrMv-VOM Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control - Model "DNC60" * Pivoting control panel, front right * Numerical control unit * Tool and program library - CNC-controlled axes: Y1 + Y2 + X + CNC crowning - CNC electro-motorized backgauge (X axis) * With 2 manually adjustable stop fingers (R + Z axes) - CNC under-table crowning - FIESSLER front safety device - Upper tool holder with upper wedge crowning (AMADA) * Including split Rehfuß upper tool (AMADA) - Split 4V universal die (AMADA), in the die shoe Dcsdpfxsxab T Ne Ab Tsr - 2 front sliding support arms with "sliding system" - Side guards (pivoting doors) - Rear Safety device (light barrier) - Machine light in the rear area of the machine - 1x freely movable foot control - Original operating instructions

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Dcsdpfxswf Hm Ie Ab Tjr Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 100920 € 1907.39 € 220 to 4050 mm Y1 / Y2 / X Achse 265 mm 3600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 22 kW 5250 mm 1770 mm 3000 mm 14750 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked Dsdpfx Ajwirwgeb Tscr 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,128 h, load capacity: 3,000 kg, lifting height: 4,200 mm, fuel type: electric, mast type: other, construction height: 2,780 mm, battery capacity: 620 Ah, remaining battery capacity: 88 %, battery voltage: 80 V, DGUV certified until: 11/2026, Equipment: UVV, cabin, fork extension, lighting, retractable fork, sideshift, Still RX 60-30 Electric Forklift with the following specifications: Lifting capacity: 3,000 kg Lift height: 4,200 mm Overall height: 2,780 mm Year of manufacture: 2019 Dedpfsxw D T Hox Ab Tocr Operating hours: 1,128 STILL 3.0 ton electric forklift with full cabin and heating, battery at 88%, good tires (rear tires new), telescopic clear view mast, fork positioner with side shifter and reach forks, road-compliant lighting, adjustable fork length from 1,150mm to 1,900mm, new charger included. Price ex works, incl. 500-hour service as per STILL manufacturer specifications and valid FEM (UVV) inspection upon sale. Viewing, demonstration, and test drive available by telephone appointment. Sale exclusively to businesses. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Further information and offers can be found on our website.

Condition: used, functionality: fully functional, machine/vehicle number: H2120X00.., Year of construction: 2020, operating hours: 1,256 h, load capacity: 3,000 kg, lifting height: 4,980 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork length: 2,200 mm, drive type: Diesel, Diesel Forklift VIN: H2120X00.. Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Solid Rubber Dcodpfswlwp Hjx Ab Tsr Rear Tires Condition: 40 - 60% Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Full Cabin