Used horizontal band saws - half-automatic - cutting range 0-300mm for sale (107)

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Hjdpfeul Svlsx Ahvsni Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: good (used), Used semi-automatic hydraulic band saw for metal Bianco MOD 330 SA 60° Blade dimensions: 3010x27x0.9mm Cutting angle: up to 60° Two cutting speeds: 35/70 m/min Hydraulic vice Hodpfsxpi E Sex Ahvsni Cutting capacity at 0° - round 250mm - square 220x220mm - rectangle 320x220mm Machine weight: 425kg Year of manufacture: 2006

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm Hsdpfx Aowaauushvjni

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 9210 € 177.75 € Schwenkrahmen 3160x27x0,9 mm 20-100 m/min 270 mm 270 mm 340x220 mm rund 230 mm, quadratisch rund 150 mm, quadratisch rund 180 mm, quadratisch Hsdpfx Ajwirktohveni 910 mm 0.37 kW 1.5 kW 0.12 kW 1730 mm 770 mm 1460 mm 476 kg DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Hedowiqndopfx Ahvoni Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Manufacturer warranty until 31.12.2026 OPTIONS: Roller tables and band saw blades on request

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, MEBA 260 GP (2004) - Column-type semi-automatic band saw Hnsdpfx Aheynv U Eovsi - Cutting diameter (round stock): 260 mm - Workpiece capacity: 260x310 mm - Cutting angle up to 30° (or 60°) - Infinitely variable speed control (inverter): 15–100 m/min - Electronic angle positioner - Oil mist cooling system - Weight approx. 700 kg - Motor 1.5 kW - Saw blade size: 3350x27x0.9 mm (three new blades included) - Machine mounted on heavy-duty, stable transport wheels - CE compliant - Original documentation included Transport available anywhere in the country (additional fee applies) Attention!!! SPECIALIST (20 years in the market): METAL BAND SAWS. The largest selection in the country. I have other metal band saws of all types, and I import professional equipment on request from 200 mm to 1000 mm cutting diameter. Automatic, semi-automatic, and manual machines ONLY PROFESSIONAL MACHINERY!!! BE SURE TO CHECK MY OTHER LISTINGS!!! I MATCH MACHINES TO INDIVIDUAL NEEDS! IF YOU NEED A QUALITY MACHINE AT A GOOD PRICE – CALL 5047.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 11640 € 223.49 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 300 mm 240 mm 420x200 mm rund 240 mm, quadrat 230 rund 170 mm, quadrat 170 830 mm 1650 mm 1200 mm 1900 mm 400 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment Hnjdpfx Aoynm S Iehvsi _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Optional equipmente: adjustable vice pressure EUR 330,--

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 14110 € 270.91 € Hedpfsynm Suox Ahveni Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 280 mm 240 mm 420x200 mm rund 260 mm, quadrat 240 rund 170 mm, quadrat 160 rund 200 mm, quadrat 180 830 mm 1600 mm 1600 mm 1800 mm 488 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 12680 € 243.46 € Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 350x140 mm rund 230 mm, quadrat 200 rund 140 mm, quadrat 140 rund 200 mm, quadrat 170 830 mm 1600 mm 1550 mm 1750 mm 460 kg hydraulicvice saw beam moves up and down by hydraulic cylinder Hnodpfsynm Shox Ahvji fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 10860 € 208.51 € Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1650 mm Hnjdpeynm Sbjfx Ahvsi 1200 mm 1850 mm 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 10460 € 200.83 € Schwenkrahmen 3010x27x0,9 mm Hnodpfsynm R Rex Ahvei 35/70 m/min 260 mm 240 mm 330x120 mm rund 200 mm, quadrat 190 rund 120 mm, quadrat 115 830 mm 1600 mm 1200 mm 1800 mm 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Option: Adjustable vice pressure (R1) EUR 403,--

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 9420 € 181.81 € Schwenkrahmen 2450x27x0,9 mm 35/70 m/min 220 mm 200 mm 250x150 mm rund 160 mm, quadrat 140 rund 90 mm, quadrat 90 mm 800 mm 0.7 kW 1330 mm 1300 mm 1880 mm 350 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent utomatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Hjdpfxsynm R De Ahvsni OPTION: Adjustable vice pressure (R1) EUR 403,--

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 250 mm cutting range min.: 110 mm Hnodpfx Aeym Ukcjhvji saw blade diameter: 3100 x 27x 0,9 mm square: 220 mm flat: 275x170 mm cutting speed: 37/74 m/min total power requirement: 1,1/1,5 kW weight of the machine ca.: ca. 500 kg

Condition: used, Year of construction: 1990, functionality: fully functional, Technical Data: Description: Fully automatic band saw with dual-column guide for serial cutting Model: KAMU HB 270 A Year of Manufacture: 1990 Operating Modes: Manual, semi-automatic, fully automatic Working Range 90° round: ø250 mm Working Range 90° square: 250x250 mm Saw Blade Dimensions: 4,100 x 32 x 1.1 mm Voltage: 400/230 V 50 Hz Control Voltage: 230 V/24 V Dual-column: Yes Equipment: Chip conveyor, right side / chip brush motor with chip brush / operating manual Drive Motor: Infinitely variable control via helical-worm gearbox, blade speed from 11–55 or 22–110 m/min Motor Power: 2.4/3 kW Saw Blade Tension: Hydraulic blade tension Roller Conveyor (optional): Approx. 3.8m roller conveyor, included free of charge (weight approx. 300kg) Machine Dimensions (L/W/H): Approx. 2,800 x 2,200 x 1,900 mm (without roller conveyor) Material Support Height: Approx. 750 mm Weight: Approx. 1,700 kg Hedpfxsyrrcte Ahvjni Overall Condition: Used, good, fully functional. Private sale, not a dealer. Machine can be demonstrated under power. All technical data subject to change without notice.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° Hodpfx Ahofgyh Uevoni • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Year of construction: 2012, Technical details: Hodpfx Aheymmcwevjni cutting diameter: 250 mm cutting range min.: 80 mm saw blade diameter: 2950 x 27 x 0,9 mm cutting range square: 220 mm cutting capacity flat: 280 x 220 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 650 kg

Condition: new, Bernardo twin band saw MITRE MBS 300 DG-V PRO Technical specifications Cutting capacity round / square 90 ° 255 mm / 210 x 210 mm Section flat 90 ° 310 x 210 mm Cutting capacity round / square 45 ° R 220 mm / 210 x 210 mm Section flat 45° R 220 x 200 mm Cutting capacity round / square 45 ° L 230 mm / 200 x 200 mm Section flat 45° L 230 x 200 mm Cutting capacity round / square 60 ° R 135 mm / 135 x 135 mm Section 135 x 135 mm flat 60 ° R Working height 930 mm Band saw blade dimensions 2750 x 27 x 0,9 mm Cutting speeds, variable 20 - 80 m/min Coolant pump 100 W S1 motor power output 100% 1,5 kW Motor power S6 40% 2,2 kW Voltage 400 V Machine dimensions (L x D x H) 2000 x 1250 x 1900 mm Weight 350 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Blade guide with tungsten carbide inserts Hodpfx Ahsd Hzbwjveni • Quick clamping Vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, PILOUS double miter band saw ARG 300 plus H.F. with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, belt tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm,+45°240mm,+60°155mm Square: 90°290mm, -45°195mm,+45°225mm,+60°150mm Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor:400 V, 50 Hz, 2,2 kW Pump motor:400 V, 50 Hz, 0,05 kW Hydraulic power unit motor:400 V, 50 Hz, 0,18 kW Saw blade speed:15-90 m/min. Stepless Saw blade length:3150 x 27 x 0,9 mm Working height from vice: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm machine dimensions (max.)1700 x 2000 x 2150 mm Machine weight: 645 kg Hjdpsh S Ikkofx Ahvsni

Condition: new, PILOUS double miter band saw ARG 260 plus H with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, Belt tension indicator Roller conveyor D 300 / 3m incl. manual measuring system Roller conveyor D 300 / 3m Cutting range: Round:90° -45° +45° +60° in mm:260-175-200-125 Square:90°-45°+45° +60° in mm:255-145-185-120 Rectangle:90°-45°+45° +60° in mm.300 x 200-190 x 100-185 x 200-125 x 120 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Motor from hydraulic unit 400 V, 50 Hz, 0.18 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm working height from vice 910 mm Oil in hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) Coolant tank approx. 15 l Machine dimensions (min.) 950 x 1650 x 1450 mm Machine dimensions (max.) 1550 x 1850 x 2050 mm Hsdpfxeilqbuo Ahveni Machine weight 490 kg

Condition: new, For technical specifications, see the PDF file. Hodpfsxp Hygsx Ahvsni

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Saw band dimensions: 2950x27x0.9 mm 2 speeds: 15-100 m/min Vice opening: 285 mm Cutting range at 90° (round): 250 mm Cutting range at 90° (square): 220 mm Cutting range at 90° (flat): 280x220 mm Cutting range at 60° (round): 120 mm Cutting range at 60° (square): 80 mm Cutting range at 60° (flat): 140x100 mm Cutting range at 45° (round): 230/200 mm Cutting range at 45° (square): 200/170 mm Cutting range at 45° (flat): 220x200/200x140 mm Total power requirement: 2.2 kW Hnodoylwi Eepfx Ahvei Weight: 990 kg Machine dimensions: 2500x2230x2050 mm

Condition: new, Year of construction: 2026, power: 2.2 kW (2.99 HP), cutting height (max.): 300 mm, cutting width (max.): 560 mm, control type: manual, pivoting range: 60 °, actuation type: hydraulic, rotational speed (max.): 100 rpm, rotational speed (min.): 80 rpm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, CRONOSS 300X560 YDG Pivoting Head Semi-Automatic Band Saw Machine The CRONOSS 300X560 YDG is a robust, pivot-type semi-automatic band saw machine engineered for medium-scale metal cutting operations. Featuring a rotary head that allows for precise and repeatable angled cuts between 0° and 60°. This machine offers a reliable cutting solution for steel fabrication workshops, machine manufacturers, and metal processing plants. Standard Features - Hydraulic vice - Variable speed control (inverter-driven) - Safety switches - Hydromechanical blade tensioning system - Variable miter cutting from 0° to 60° (Pivoting Head) - Angle gauge - Adjustable head descent system - 1 band saw blade included - 2 material support stands included - Country of origin: Turkey Model options available for diameters ranging from 220 mm to 3000 mm. Technical Specifications – 300 YDG Capacity at 90° - Round: 300 mm - Square: 300 x 300 mm - Rectangle: 300 x 560 mm Capacity at 60° - Round: 200 mm - Square: 180 x 180 mm - Rectangle: 180 x 245 mm Capacity at 45° - Round: 300 mm - Square: 235 x 235 mm - Rectangle: 235 x 360 mm Motor & Technical Details - Main motor: 2.2 kW - Hydraulic motor: 0.37 kW - Coolant motor: 0.09 kW - Blade dimensions: 34 x 1.1 x 4100 mm - Material feed height: 809 mm - Vice maximum opening: 600 mm - Vice minimum closing: 0 mm - Stand width: 615 mm - Dimensions (H x W x L): 1268 x 2035 x 2862 mm - Weight: 900 kg Production & Supply The CRONOSS 300X560 YDG is manufactured in Turkey. Alternative capacity and configuration options are available upon request. Contact us for detailed technical information and pricing. Band Saw Machine Semi Automatic Band Saw Hnjdpfx Ahoyntzpevei Pivot Type Band Saw Rotary Head Band Saw Metal Cutting Machine Steel Cutting Band Saw Industrial Band Saw Hydraulic Band Saw Angle Cutting Band Saw 300 mm Band Saw 300x560 Band Saw Workshop Band Saw Machine Structural Steel Cutting Machine

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m Hnedpfxod Iip Sj Ahvji • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg Basic equipment: Hnsdpfx Ahsfg E H Njvji Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: ready for operation (used), Thomas Mod 310 S.O. Semi-Automatic Hydraulic Bandsaw Metal Saw #7428 Maximum clamping capacity: 300x270mm Dimensions: 200cm x 90cm x 200cm (LxWxH) 380V Variable adjustable cutting speeds Equipped with coolant pump Includes 2 additional new saw blades Video available on our YouTube channel. Location: Budel, Netherlands Transport available at extra cost Hnodpfx Ahjylpt Aovoi Call or email for more information Check out our other listings as well We are also looking for industrial machines year-round. If you have surplus machines, please email us with photos and information. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition and wear are consistent with its age; used machines are sold without warranty. The price shown is excluding VAT (unless stated otherwise).