Used Mep Shark 260 for sale (116)

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Podpfoxz Hhzsx Adnerd Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: like new (used), Year of construction: 2018, Used automatic band saw MEP Shark 332 nc 5.0 Blade dimensions: 3320x27x0.9mm Cutting angle: from -45° to +60° Blade speed: from 15 - 100 m/min Pjdpfx Asxz Ulbjdnsrd Cutting capacity at 0°: - round 300mm - square 260mm - rectangle 330x260mm Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Year of manufacture: 2018 Machine weight: 1150kg THE SAW IS SOLD WITHOUT ROLLER TABLES. The machine will be available after 15.12.2025 The machine will be fully inspected and serviced.

Condition: used, cutting height (max.): 280 mm, MEP Shark 280 with micro spray unit chip drawer Prodpfewza T Tjx Adnjd saw blade dimensions: 2950 x 27 x 0.9 mm maximum cutting capacity: 280 mm maximum vise opening: 280 mm vise height: 130 mm 2 cutting speeds swiveling cut from 0 to 60° automatic lowering manual vise clamping lubricant pump voltage: 380 V width: 900 mm depth: 1900 mm total height in raised position: 1900 mm weight: approx. 650 kg

Condition: as good as new (ex-display), Year of construction: 2024, saw band length: 2,950 mm, saw band width: 27 mm, type of input current: DC, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, cutting height (max.): 285 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Pjdpoxyywmsfx Adnord Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: new, MEP SHARK 382-1 SXI EVO metal band saw Hydraulic semi-automatic. MEP dealer - please send us your inquiry motor power 1,5 / 1,8 kW Bench opening 385 mm belt dimensions 3770 x 27 x 0,9 mm weight 695 kg Speed 40/80 m/min. cutting area 0° 300 / 250x250 / 380x250 cutting area 45° right 260 / 250x250 / 300x200 Cutting area 45° left 240 / 210x210 / 280x160 Cutting area 60° right 180 / 170x170 / 200x170 Cutting area 60° left Description Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical posts. Prsdpfxsg Hzxis Adned 420 mm rotary table on roller bearing with preloaded thrust bearing and interchangeable steel inserts. Double belt speed (40/80 m/min.).

Condition: not inspected (used), MEP Shark 330 CNC FE automatic metal bandsaw, fully hydraulic, untested. Cutting dimensions: see photos. Approximate dimensions: Length: 2200 mm, Depth: 1850 mm, Height: 2000 mm. For details and condition, see photos. Shipping is possible by arrangement at an additional cost. Podpfx Adoxmti Ajnsrd

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg Podpsxta N Asfx Adnjrd - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: new, Model Name Prjdpsgvkbcefx Adnsd Shark 282 CCS

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 0306283/0, - Very good metal band saw. High cutting performance. - 5 new saw bands - Roller conveyor approx. 5 m (also fully functional) Psdpfxjxnartj Adnord

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing Prjdefg E Iajpfx Adnsd and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, Model Name Predpfxsgvkgls Adnod Shark 281 SXI evo

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Prjdpfx Asfg E Ibednod Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: new, Model Name Pjdpfxjgvkchj Adnsrd Shark 281 CCS

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and Psdpfxjfg E H Ro Adnsrd with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, Model Name Prjdel Sva Iepfx Adnod SHARK 331-1 NC 5.0 SPIDER

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. Pjdpfx Adsfg E H Esnerd - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, Model Name Predegvkafspfx Adned Shark 332-1 SXI evo

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm table height mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg dimensions of the machine ca. m Basic equipment: Prjdpfxsfg E H Ns Adnod Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, Model Name Prsdpfxjgvquwj Adnsd Shark 332-1 CCS

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Prjdpfxjfg E Hye Adnsd Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, Model Name Prsdpfx Adegvkctonjd Shark 282 SXI evo

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm Pjdpfefg E H Dox Adnsrd capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) Psdpfxelf Tu Us Adnerd -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Predpfx Asfg E H Todnod Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m Prodpfefg E H Isx Adned MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)