Used horizontal band saws - automatic - cutting range 300-359mm for sale (89)

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 350 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 1,820 mm, total length: 1,850 mm, total width: 2,300 mm, overall weight: 1,900 kg, table height: 800 mm, section length (min.): 10 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the HBE321A Dynamic bandsaw automat Band guide parts made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This noticeably increases the service life of the saw blades. Servo feed system The saw feed is controlled by a ball screw and a servo motor. This results in significantly shorter cycle times and more precise saw feeds. Your advantage: higher cutting performance and longer band service life! Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Bwjdpfxjz Rwitj Aknew Auto-Feed-Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed and cutting speed. Electrically powered chip brush with a Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the metal bandsaw to the changing material cross-sections. Due to its arrangement directly at the back of the saw blade, the system regulates quickly and precisely. Automatic guide arm adjustment This ensures that the metal bandsaw provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Energy-efficient The use of modern drives and a special hydraulic system reduces energy consumption by approx. 30% compared to the previous model. Easy to operate Quick and easy operation of all functions of the metal bandsaw via touch control. Double clamping device offers process reliability, especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the metal bandsaw and fix both the raw material and the sections that have just been cut.

Condition: new, neu ca. 4 Monate ab Auftragse Bwjdpfx Akowiq Hgonow Türkei 32000 € 611.2 € Doppelsäulenführung 5000 x 34 x 1,1 mm mm 20 - 120 m/min 330 mm 330 mm 350 x 330 mm 845 mm 1.1 kW 3 kW 0.12 kW 2815 mm 1935 mm 1855 mm 2560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH ALTERNATIVE (PRICE ON REQUEST): Model BMSO 330 CH NC with hydraulic feed instead of servo feed

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Bwsdpfx Ajqzhxijknew Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) - Delta frequency inverter (NC Pro,) - Motor protection switch - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V Bsdpfx Akot Tqlboneww total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Parameters: Cutting diameter: 330 mm Cutting range (90° flat): 350 x 330 mm Saw band length: 4900×34×1.1 mm Cutting speed: 15–150 m/min (adjustable) Max. workpiece weight: 670 kg/m Total power requirement: 3.9 kW Table height: 750 mm Machine weight approx.: 2,600 kg Required space approx.: 1,700×2,400×2,200 mm Equipment: Laser line for cutting indication/marking Cutting process control Material monitoring Material database Bwjdpfx Ajx H Rynoknew Feed force adjustment Zero stop Job menu Bundle cutting clamp Vertical roller Double-sided opening / reduced end scrap Operation and Comfort: Swiveling control panel LED work lighting Receiving table Water spray gun Chip and Coolant Management: Screw chip conveyor Micro-dosing Coolant level and flow control

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 45100 € 861.41 € Doppelsäulenführung 5200x34x1,1 mm 20-100 m/min 360 mm 360 mm 610x360 mm rund 360 mm, quadrat 360 rund 360 mm, quadrat 360 rund 325 mm, quadrat 265 735 mm 1.5 kW 3 kW 0.12 kW 2850 mm 2250 mm 1870 mm 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,-- Bwsdpfjwirhxex Aknow

Condition: new, Year of construction: 2026, Condition: New Machine type: Twin-column bandsaw fully automatic Blade dimensions: 4,240 x 34 x 1.1 mm Cutting capacity (rectangular): 325 x 380 mm Bsdpfxsyc Hd Tj Aknsww Cutting capacity (round): 325 mm Bundle cutting: 190 - 300 x 70 - 140 mm Cutting speed: 15 - 100 m/min (stepless) Main drive motor power: 3.7 kW Table height: 800 mm Coolant capacity: 75 L (19.8 gal) Clamping force: 18-28 kg/cm² Control method: Hydraulic, NC Automatic Single cut length: 0-403 mm Multiple cut length: 0-9,999 mm Residual piece: 50 mm Weight: approx. 1,950 kg Dimensions (W x D x H): approx. 2,410 x 2,250 x 2,250 mm Standard Equipment: - Touchscreen control - Stepless cutting speed adjustment (frequency inverter) via touchscreen - Up to 100 jobs programmable - Automatic kerf compensation - Double retracting vices - Display for blade height and cutting speed - Blade height encoder - Work lamp - Blade cleaning brush - Coolant gun - Broken blade detection sensor - Hydraulic blade tensioning - Hydraulic carbide blade guide - Hydraulic chip conveyor - Vibration damper - Manual in English - Machine feet - CE Options: - Variable pressure adjustment for clamping jaws - Hydraulic bundle clamping - 2 meter roller conveyor

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 36720 € 701.35 € Doppelsäulenführung 3270 x 27 x 0,9 mm 40 - 80 m/min 300 mm 300 mm 330 x 290 mm Bedpfxewiq Tte Akneww rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 840 mm 0.75 kW 1.5 kW 0.06 kW 3070 mm 2060 mm 1930 mm 2400 x 1700 x 1700 mm 1210 kg Double-column guided automatic band saw Vertical infeed by means of longitudinal ball bearing guides Feed length and number of pieces via CNC (up to 99 programmes) Automatic cutting cycle with sensor pin Automatic material feed 800 mm / stroke Variable cutting pressure and infeed speed Infinitely adjustable band speed Cooling lubricant device Chip brush Chip conveyor Hydraulic clamping vices for clamping during the cut and on the feed carriage Operating instructions in GERMAN or ENGLISH ALTERNATIVE: Version with 7" touchscreen control, additionally included: Automatic preselection of cutting parameters Belt deviation control Adjustable vice pressure

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. Bwodewf Hm Ijpfx Aknew • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW Bwjdpfx Aksupw R Aenew weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 34400 € 657.04 € Doppelsäulenführung 4380x34x1,1 mm 20-100 m/min 325 mm 325 mm 400x325 mm rund 325 mm, quadrat 325 rund 300 mm, quadrat 265 rund 190 mm, quadrat 190 Bwsdpfx Aewirhrsknew 655 mm 1.1 kW 2.2 kW 0.12 kW 2130 mm 2150 mm 1650 mm 1860 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--

Condition: repair required (used), Cutting capacity round Ø 300 mm Cutting capacity rectangular 305 x 305 mm Saw blade speed approx. 25-108 m/min Saw blade drive 4 kW Incl. hydraulic saw blade tensioning Incl. coolant system Incl. various replacement bands Bedswqcahjpfx Akneww

Condition: used, Year of construction: 2021, CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0) Bwedpfxjyhrb Ij Aknjw

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Bwsdpstv Ip Iofx Aknow

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 11100 € Bodpfx Akowirhfensww 213.12 € Schwenkrahmen 3660x27x0,9 mm 20-100 m/min 320 mm 300 mm 320x300 mm 640 mm 0.37 kW 2.2 kW 0.12 kW 1900 mm 850 mm 1300 mm 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Year of construction: 1978, condition: used, machine/vehicle number: 1078136, Behringer full automatic sawing machine in a good working condition. Capacity round 320mm Bwodpfxjbta Dme Aknow

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 29800 € 569.18 € Schwenkrahmen 3660x27x0,9 mm 15-120 m/min 320 mm 320 mm 350x320 mm rund 170 mm, quadrat 150 rund 260 mm, quadrat 220 rund 320 mm, quadrat 280 740 mm 1.1 kW 2.2 kW 1 kW 0.12 kW 2120 mm 2100 mm 1810 mm 1810 kg NC control panel Bodpjwirhlefx Aknoww servo feed with ballscrew spindles hydraulic vice hydromechanical blade tension inverter coolant pump saw blade blade brush security switch height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning

Condition: new, cutting diameter 360 mm saw band length 5050 x 41 x 1,3 mm cutting width 1,3 mm cutting speed 15-100 m/min total power requirement 4 kW weight of the machine ca. 2,8 t Bedpfx Aowg Sfleknsww dimensions of the machine ca. 3,0x 2,6 x 2,2 m The X-SMART 4 ??is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm. Other features include: 4 kW drive motor with 41 mm saw blade width Modern 7" touchscreen CNC control Inclined saw frame Solid 2-column structure Linearly guided material sensor Hydraulic cutting pressure regulation 500 mm feed unit Double vise 2 vises in front of and 2 vises behind the saw blade Electrically driven chip conveyor Cleaning gun Full enclosure LED work light Minimum remnant length 100 mm Optionally available: Bundle clamping device; MMS and roller conveyors

Condition: new, For technical specifications, see the PDF file. Bwodexp H Nnopfx Aknew

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm Bwedpjxabacsfx Aknsw capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: excellent (used), Frietsch SAWMILL MACHINERY Buying and selling KASTO sawing machines Dear Sir or Madam, We buy, sell, overhaul, repair, and repaint KASTO sawing machines. We have over 40 years of experience with KASTO sawing machines and have specialized in overhauling these machines. We can also handle KASTO control systems! Bwedpfxefh Huko Aknsw The machines are overhauled by trained personnel according to KASTO factory standards. We also source KASTO sawing machines according to your specifications for machine overhauls. Excellent price-performance ratio thanks to professional machine overhauls.

Condition: new, neu ca. 4-6 Monate ab Auftrag Türkei 12200 € 234.24 € Schwenkrahmen 3660x27x0,9 mm 20-100 m/min 320 mm 300 mm 320x300 mm 640 mm 0.37 kW 2 kW Bodpfjynmxhex Aknjww 0.12 kW 1900 mm 850 mm 1300 mm 770 kg Roller material feed with encoder and NC control blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: new, For technical specifications, see the PDF file. Bwedpfx Asxp H H Heknow

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Bodpfx Akjt Hwrnenjww Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm Bwsdpfxera Rrle Aknsw 40 / 80 mt/min weight of the machine ca. 1050 kg