Used Bale presses for sale (210)

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Nwjdsv Amw Nopfx Af Een Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), empty load weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Nwedpfx Asvtpq Hjf Een Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Nodpfx Asvaw T Asf Ejwn

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Motor: 5,5 kW Nedpshzr U Iofx Af Eown hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Njdpfx Aevvk T Ijf Ejwn Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 4 t, Perfect condition, newly repainted, fully tested, new wearing parts and oil, ready to use. We have 2 units. Nedpfjxdk Dxex Af Eown

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 Nwsdpfx Afsra Nyuo Ejn ALSO AVAILABLE: 2017–2018 models – €7,500

Condition: excellent (used), Year of construction: 2015, operating hours: 19,750 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,000 l, empty load weight: 33,000 kg, volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2015 Operating hours 19,750 hours, as of July 2025 Number of bales pressed: 24,760 bales, as of July 2025 Nedpjxb Dvvefx Af Eown Main press force 1000 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 110 kW Total current consumption 213 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 35,000 x 8,480 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2015 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 14,500 mm Length goose neck 1,550 mm Grade 30° Nominal width 1,800 mm Effecting width 1,638 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 11,200 x 3,000 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, the transverse distribution belt and the baling press are for sale, with bale chute but without wire pulling stations and without wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : Njdpsndcxgjfx Af Eswn 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: used, Year of construction: 2018, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2018 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2018 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Processed materials: Paper, cardboard, film Please note: All technical data are based on manufacturer information. We assume no liability for the details provided or for any errors. Offer is subject to prior sale and can be withdrawn at any time. An inspection is possible by appointment. Sale is ex works against advance payment, without warranty or guarantee. Nwjdpfxjw T Rc Ij Af Ejn

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Neder Dufbjpfx Af Eown Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, filling opening width: 1,200 mm, filling opening length: 1,600 mm, bale width: 300 mm, bale height: 300 mm, total width: 4,600 mm, total height: 2,244 mm, total length: 6,130 mm, input voltage: 380 V, overall weight: 16,500 kg, power: 55 kW (74.78 HP), Equipment: documentation/manual, Bale clamp 300 x 300 mm. Very good condition. Well maintained. Nsdpfx Afsxcazws Eewn

Condition: ready for operation (used), Bramidan 4-0F Motor: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 mm Bale weight: 200–250 kg Pressing force: 18 tons Njdpfsv Ai Uqox Af Eswn Weight: 1580 kg This machine is used to reduce the volume of waste such as film, cardboard, etc. We also have a Bramidan 3-chamber baler available.

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. Nwodpfx Afexbgnho Ejn The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2006, Balemaster Year: 2006 Type: CMG 268 Waste compactor Nodpfx Afjrdwlks Eown

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, pressing force: 58 t, filling opening width: 600 mm, filling opening length: 1,190 mm, bale length: 1,100 mm, bale weight: 450 kg, total width: 700 mm, total height: 1,000 mm, overall weight: 2,300 kg, STRAUTMANN PP1207 Single chamber baler - Very good condition. Low running. 70*110*80-100 cm 58 tons of pressing force 70 cm deep chamber 60cm high door opening Quick Door auto door hydraulic bale dropping Possible recyclable materials: Nwjdpswqfnzjfx Af Ejn Cardboard, film, PET bottles, foam, cans, electronic scrap Bale size (LxWxH): 1200 x 700 x 800 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1844 x 1067 x 2868 mm Transport height: 1970 mm Filling opening: 1145 x 430 mm Throughput: 1 - 2 bales / hour Number of band channels: 4 Weight of press: 2,200 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / covered outdoors Noise level: under 80 dB(A) Year of manufacture: 2004 Baler rental possible.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, pressing force: 25 t, filling opening width: 800 mm, filling opening length: 1,050 mm, bale width: 900 mm, bale height: 800 mm, input voltage: 400 V, noise level: 85 dB, power: 18.5 kW (25.15 HP), volume flow: 160 m³/h, Bollegraaf HBK25 offered in Cyprus. The machine is in good condition and includes a floor conveyor belt. The machine is immediately available. Technical specifications of the baler: Drive: 18.5 kW Bale size: 800 x 900 x adjustable Feed hopper dimensions: 1,050 x 800 Press force: 25 tons Capacity: 160 m3/hour (depending on material) Nedpfxjxbdgue Af Eown Technical specifications of the conveyor belt (approximate): Length on floor: 3,000 mm Diagonal length: 5,000 mm

Condition: good (used), B5 – Ideal for large cartons: High throughput – large capacity Bale is ejected automatically Strap rollers positioned at the front for easy strap replacement Cardboard bale weight (kg): 80-110 Plastic film bale weight (kg): 90-130 Bale size WxDxH (mm): 1000 x 700 x 800 Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Noise level (dB): 65-68 Njdpfx Aev Aktnef Eswn Average cycle time (sec): 33 Dimensions WxDxH (mm): 1360 x 895 x 2370 Weight (kg): 600 Feed opening W x H (mm): 1000 x 500 Year 2015-16 price: 4000 EUR Year 2014 price: 3500 EUR

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, empty load weight: 8,500 kg, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a Nwsdpjw U Dt Nefx Af Esn bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 90 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 720 mm, bale height: 1,100 mm, bale weight: 600 kg, overall weight: 32,000 kg, pressure: 300 bar, power: 110 kW (149.56 HP), BOA baler with double pre-press flaps available in fully refurbished condition. The machine is located at our workshop in Almelo and can be inspected by appointment. If required, a matching (new) conveyor belt can be produced. The machine is perfectly suited for baling various materials such as cardboard, paper, plastics, car tires, and RDF. The machine is equipped with a so-called refu-ram. This is ideal for baling materials such as plastic bottles and/or shredded RDF. Nwsdpfx Asxbc U Def Esn Technical specifications: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tying wires: 5 vertical

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Nwodpfxora Nrxj Af Eon Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: good (used), Bramidan B 20 Baler Bale dimensions – WxDxH (mm): 1200 x 800 x 800 Feed opening WxH (mm): 1200 x 480 Pressing force: 20 tons Motor (kW): 4.0 Cycle time (s): 36 / 21 Baler dimensions WxDxH (mm): 1775 x 1030 x 2790 Weight (kg): 1600 Stroke (mm): 750 Number of tying points: 4 Year of manufacture: 2012 – 2017 Bramidan X25 – High-performance baler for waste compaction Suitable for various materials, including stretchable types Large, wide chamber Retaining clamps prevent material expansion inside the chamber Short cycle times allow for rapid waste processing TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Nodpsv Aku Sjfx Af Ejwn Textiles EPS foam Steel cans BALE DIMENSIONS 1200 x 800 x 800 mm PRESS FORCE 25 t BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Year of manufacture: 2012–2018 Price: 5,500 EUR

Condition: excellent (used), Manufacturer: Strautmann Model: PP 1207 Plus Bale size (LxWxH): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 t / 580 kN Performance: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: sheltered indoor/outdoor Noise level: less than 80 dB(A) Year of manufacture: 2003–2007 Nsdpfx Aev Aiymof Ejwn I also have Strautmann PP 1207 balers from 2010–2011, price 5500 EUR I also have Strautmann PP 1208 balers from 2014–2015

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Nodpfx Afera Rbgj Eown Compression force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s

Condition: excellent (used), Model: HSM V-press 1160 plus baler Press force (kN): 532 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (LxWxH) (mm): 1780x1150x2985 Power (kW): 4 kW Weight (kg): 2300 Nwsdpfx Aov Al Tisf Esn Year of manufacture: 2017-2021 Year 2018, price: 8,500 EUR