Baling press with feed conveyor

Bollegraaf HBK 25

Year of construction: 2008, operating hours: 40,000 h, condition: good (used), machine/vehicle number: HBC 140 2x75kW 2008 (00191), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. Dcodjkcgf Hepfx Ab Ter The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical grinding machine. Schehr Meuselwitz, model SAXW 1000. Weight: 33 tons. Centre distance: 5,000 mm. Grinding length: 4,000 mm. Concave and convex grinding direction. Total length: 9.6 meters, width: 3 meters, height: 2.4 meters. 380 Volt. The machine can be inspected under power at the seller's facility. Dcsdpfx Aswb Dq Nsb Tor

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, paper width (max.): 330 mm, paper height (max.): 487 mm, number of feeding trays: 3, Equipment: auto duplex, brochure finisher, Konica Minolta Bizhub Pro C2060l sheet-fed digital color printing machine with Fs-612 brochure finisher Maximum media size is 330x487mm, in banner mode up to 1200mm length. In very good condition Dcsdsv Sq Sijpfx Ab Ter

Condition: used, Year of construction: 2006, Bale size 400x400 mm Force 1 Step 850 KN Force 2 Step 850 KN Force 3 Step 850 KN Steel < 8 to/h Aluminium < 4 kg/h Driving Power 50 KW Arrangement Surface 7,5 x 7,2 m x m Machine weight 29 to Dcedpfx Absltinwo Tor Press box aperture1,9 x 0,95 mxm Place: Germany Available immediately

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Dcjdpfju Thhrjx Ab Tor Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Dodpfxsrx S Iws Ab Tocr Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Condition: like new (used), Year of construction: 2015, operating hours: 37 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, number of drawers: 1, For Sale: SCREEN PT-R 4600Z CTP System (AGFA AVALON N4-30XT)– Excellent Condition MACHINE FROM SHOWROOM! We offer a complete SCREEN PT-R 4600Z thermal CTP system, fully operational and in perfect condition. The equipment is currently in stock and ready for immediate pickup. System includes: 1. SCREEN PT-R 4600Z CTP unit (Year: 2015) Plate count: 2276 Equipped with a 64-channel LD recording head (in perfect condition) 2. Automatic Plate Loader (SAL 4600) cassette with automatic interleaf paper removal 3. Built-in bridge – connects the platesetter and Processor/stacker seamlessly 4. Stacker – for efficient plate output handling 5. Agfa Apogee Workflow 10.5 with several plugins and Server station This is a complete, well-maintained CtP solution ideal for any commercial printing operation. LIKE NEW. Machine from Showroom. It is packed on original palletts. Possible to transport safe by the sea. Location: In stock, available for immediate transport Dodpfx Asw Hq Urob Tjcr Condition: Excellent / Fully tested For more details or to schedule an inspection, feel free to contact us.

Condition: good (used), Year of construction: 1993, operating hours: 604 h, Generator is in good condition, located on stock. Dcjdpfxjvkvvqj Ab Tsr

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Djdpfetyqizox Ab Tecr Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: good (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Djdeic Rl Depfx Ab Tecr Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.