Used bale presses for sale (188)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Lodpfxjy R Nnfj Ap Asab Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, We are selling a used waste baler press. It is designed for use with paper, cardboard, and plastic film. The press is fully functional. A demonstration video is available. Laedpoy S Tf Dsfx Ap Aob

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ledpfsym Uxtox Ap Asab Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request Ledpfxeyrtcuj Ap Asab - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Bramidan 4-X25 – High-performance baler for waste compaction Lsdpfev Ak Dgsx Ap Aoab Suitable for various materials, including stretchable types Large, wide chamber Safety locks prevent material expansion inside the chamber Short cycle time allows fast waste processing TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS Styrofoam Steel cans BALE DIMENSIONS 1200 x 800 x 800 mm PRESSING FORCE 25 t BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Price 4500 EUR

Condition: excellent (used), Year of construction: 2011, operating hours: 1,950 h, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 750 mm, bale height: 1,100 mm, bale weight: 550 kg, Equipment: documentation/manual, Automatic baler HSM VK 4812 The machine is maintained in perfect condition. The total operating hours are only 1950, and it has processed just 1314 bales of material. The machine was regularly serviced and has operated indoors in a warehouse since new. The baler has worked almost exclusively with non-abrasive material – textile offcuts. Key advantages of the unit: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle time → ideal for use with conveyor lines - Significantly superior to the 15–22 kW version when processing a high material stream Technical data: Pressing force: 480 kN (≈ 48 tons) Motor power: 30 kW Connected load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressing force: 58.2 N/cm² Volumetric throughput: up to 332 m³/h Practical weight throughput: approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical (maximum) throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Pressing channel: 1100 × 750 mm Filling opening: approx. 1020 × 1250 mm We also have other balers in stock. Transport costs depend on weight, volume, and most importantly, distance. When making inquiries, please provide the following details: Delivery address (postal code and town/city name). For further details and transport options please contact us by phone, as additional arrangements require direct contact. Our contact details are available in the seller's legal information. We sell and export worldwide; thanks to our extensive warehouse capacity, we can flexibly and quickly supply larger quantities as well. Lasdpfsy Sm Sqjx Ap Aob We issue intra-community invoices – VAT-free. Opening hours: Mon–Fri: 08:00–16:00 Sat: closed

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Orwak 5070 baler in perfect working condition. Fully serviced, new oil. Fully equipped – strap holders, straps, hook, bale trolley. Ledpfx Apjy Sk H Sj Asab

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 26 t, Orwak 3325 baler in perfect working order. Fully serviced, new oil. Fully equipped. Comes with additional parts for wire tying. Ledpfx Aey Sk Atsp Aeab

Condition: good (used), Year of construction: 2021, functionality: fully functional, pressing force: 58 t, Very good condition, fully functional, low operating hours, year of manufacture 2021, pressing force 58 tons. New price: seen for €19,500 Pressure cylinder has been dismantled for transport, inspection possible by appointment. Lodpsyzw U Uofx Ap Ajab Further presses in stock.

Condition: good (used), Year of construction: 2016, operating hours: 1,060 h, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Ljdpfx Asy Ni Shep Aeab Model: Dixi 80 SLD Year: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: triple, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or YouTube channel. The hydraulic hoses should be replaced. If you have any questions about the machine, we are also happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any possible errors. The offer is subject to change, prior sale, and withdrawal at any time. Viewings are possible by appointment. Sale is ex-works, subject to prior payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Lajdpsy Ni Rdofx Ap Aob Materials: paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. If you have any questions about the machine, we will be happy to answer them by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on manufacturer specifications. We assume no liability for the information provided or for any potential errors. This offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex works, advance payment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2017 Laodpfx Aey Ni I Aep Aeb Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Strapping: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. You can find a video on our website or YouTube channel. If you have any questions regarding the machine, we are also available by phone from Monday to Thursday, 8:00 am to 2:00 pm. On Fridays we are available from 8:00 am to 1:00 pm. Please note: All technical data is based on the manufacturer's specifications. We do not accept any liability for the information provided or for any possible errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Dixi 60 SLS Baler, Year of Manufacture 2013 Laodoy Ni Hxspfx Ap Aob Technical Data: Manufacturer: Dixi Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Foil The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer’s information. We do not accept liability for the accuracy or possible errors in the details provided. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewings are possible by arrangement. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baler Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Laedoy Ni Hrspfx Ap Aob Manufacturer: Dixi Year: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Size: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The press is in good, fully functional condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or for any potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by appointment. Sale by advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling Press Dixi 60 SLD, Year of Manufacture 2015 Manufacturer: Dixi Model: Dixi 60 SLD Year of Manufacture: 2015 Drive Power: 7.5 kW, 400 V / 32 A Feed Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370–410 kg Strapping: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00–14:00. On Fridays, we are available from 08:00–13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept any liability for the accuracy of the details or potential errors. This offer is subject to change, prior sale reserved and may be withdrawn at any time. Viewings are possible by appointment. Sales are ex works, against advance payment, without warranty or guarantee. Lodoy Ni Euopfx Ap Aeab

Condition: good (used), Year of construction: 2012, functionality: fully functional, Bale Press Dixi 60 SLD, Year of Manufacture 2012 Manufacturer: Dixi Model: Dixi 60 SLD Year of Manufacture: 2012 Drive Power: 7.5 kW, 400 V / 32 A Filling Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Laedoy Ni Dqepfx Ap Aeb Bale Weight: approx. 370–410 kg Tying: Triple, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. We are happy to answer your questions about the machine by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Friday we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data are based on the manufacturer's specifications. We accept no liability for the information provided or for any errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Ledpfxsra A E Ue Ap Ajab Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: ready for operation (used), Year of construction: 2008, filling opening width: 1,195 mm, filling opening length: 65 mm, bale length: 120 mm, bale width: 110 mm, bale height: 120 mm, bale weight: 550 kg, total width: 1,570 mm, total height: 2,985 mm, total length: 1,800 mm, overall weight: 2,403 kg, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Lsdpfx Aoy R Sk Nop Aeab Filling opening: 119.5 x 65 cm Condition: very good! Video of the machine in operation available on request. Transport also possible.

Condition: excellent (used), Year of construction: 2019, operating hours: 119 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Technical data: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 119 Pressing force: 60 t Drive power: 4 kW Feeding opening: 1500 x 651 mm Feeding height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical pressing capacity: 32.5 m³/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: film, paper, cardboard Note: The baler is in very good condition. Laodpfx Apsy I Rnuj Aeb Please note: All technical data is based on manufacturer's information. We assume no liability for the details provided or any possible errors. All offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Ljdpfx Apjv Amw No Ajab Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: ready for operation (used), Year of construction: 2012, Brand: HSM Model: V-press 860 plus Year of manufacture: 2012 Lodpfx Apjy N Rato Aoab Pressing force: 532 kN Voltage: 400 V Max. bale weight: 480 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm Condition: very good! Function-tested. Video of the machine in operation available on request. FLITS Rental & Sales service: with every machine we supply a bundle of tying wire (120 wires). Need more bundles? Request a non-binding quote.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Lsdpfx Apeu Thh Es Ajab Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Lodovf E Avopfx Ap Ajab Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material Ljdpsviwdmofx Ap Asab SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Lsdpov Akciefx Ap Aeab Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur