Used Bale presses for sale (214)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Lodjvwlqqepfx Afisah Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2015, operating hours: 97 h, functionality: fully functional, pressing force: 10 t, Fully serviced, fully equipped and ready to use. New oil. 5 units in stock. Lodpfxow Ey Dts Afijah

Condition: good (used), Welger Type: RC 660 Roller compactor with Brück suction Compact and fully automatic Used exclusively for producing pressed bales from low-density packaging materials. Application variants Press materials Paper edge trimming (strips and endless) Paper and film bags PP film edge trimming Film strips Clothing protection film (PP/PE films) PP/PE fiber material Insulating and nonwovens Foam mesh Packaging foam Tetrapak Length 2100mm, width 940mm, height 1755mm Dimensions of filling shaft 330 mm x 600 mm Bale format max. 400 mm x 600 mm Ledpfsdtxbiox Afieah Bale weight 20 - 30 kg depending on the material being pressed Press density 250 - 400 kg/m³ depending on the material being pressed Throughput daily output 30 bales / day Feed speed 0.36 m/s RC 660 3X 400V 50Hz 16A 2.2 kW 5.0A 700 kg Brück extraction Series: KFA Size: 60-30-3000 Air output: 6,000 m³/h Motor output: 0.3 kW Filter area: 30 m² Negative pressure: 3,100 Pa Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 1991, Baler BOA 45 K Baler BOA 45 K 1 Description, Technical data baler: Manufacturer BOA Type 45 K Year of construction 1991/ 2013 completely overhauled and renewed the PLC Press power main press 70 tons Feed channel 1,500 x 1,000 mm Volume press space 1,7 m³ Theoretic cycle time 18 seconds Bale size 700 x 1,150 mm, length variable Driving motor 2 x 18,5 kW Connected load 60 kW Tying system 4-fold vertical, 2-fold horizontal, fully automatic Throughput rate 6 up to 10 tons/hour, depends on material Bale weight 500 up to 600 kg, depends on material PLC Unitronics EX-D16A3-T016 Volume hydraulic oil tank 800 l Transport dimensions only baler 9,800 x 2,250 x 3,200 mm (l x w x h) Machine weight baler approx. 18 tons Condition: The press was completely overhauled in 2013, provided with a new PLC and is in a good condition. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Laodpfoqhnw Aox Afieh

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Laedpow Az E Tsfx Afieh

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21 03 0178, pressing force: 80 t, filling opening width: 1,500 mm, filling opening length: 1,800 mm, bale length: 1,100 mm, bale weight: 600 kg, total width: 750 mm, total height: 3,400 mm, total length: 12,220 mm, input voltage: 400 V, input current: 311 A, overall weight: 21,000 kg, oil tank capacity: 1,200 l, The machine was in operation until 06/2024 and was taken out of service due to a consolidation measure. The system will be inspected and overhauled before sale. Lsdjwx Nxyjpfx Afisah

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Lodpfx Afjvn Tg Ioisah Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 50 t, Perfectly functioning, fully equipped, cleaned, new oil. Lodsv Udpmepfx Afisah

Condition: repair required (used), Year of construction: 1990, functionality: not functional, power: 45 kW (61.18 HP), Briquetting machine, with some spareparts and 45kw motor. Laodpfetur Ewsx Afijh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, pressing force: 25 t, filling opening width: 1,090 mm, filling opening length: 530 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 800 mm, bale weight: 250 kg, total width: 1,760 mm, total height: 1,995 mm, overall weight: 1,410 kg, noise level: 59 dB, transport height: 1,995 mm, year of last overhaul: 2025, Vertical baler Bramidan 4- x 25 for 25 t pressforce. In good condition, ready to work. Bale weight 200-300 kg. Ledpfx Aswpmbaofisah

Condition: used, HSM V-Press 605 waste paper baler - used The HSM baler is a compact device for reducing packaging waste by up to 95%. It is designed to compact and crush cardboard (paper sacks, waste paper, offcuts) and film (stretch film, plastic sacks). It enables them to be disposed of economically. The waste paper baler has a graphic text display informing of the machine's stage of operation and a large waste loading opening. All this contributes to the comfort of use of the baler and its easy intuitive operation. Advantages of the HSM V-Press 605 baler: - Compact size - contributes to space saving. - Crushing force of 57 kN (approx. 6 tonnes) - allows bales of up to 70 kg with dimensions of 80 x 60 x 60 cm to be formed. Lsdpfxewcpvao Afioah - Low noise level - 60.1 dB (A) - Material support claws - increases loading volume and therefore increases baling capacity. - Mechanical ejector - makes bale removal easier. - Large loading aperture - increases user comfort. - Quick and easy assembly. The offer concerns the HSM V-Press 605 waste paper baler: - Code produkt : MTP004168 - Product condition: used - Year of manufacture : 2018 - Model: V-Press 605 - Width: 119 cm - Depth: 81.5 cm - Height: 198 cm - Weight: 485 kg - Power: 1500 w - Voltage: 400 v Net price : €3499.00 each * I have large quantities, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: reconditioned (used), Year of construction: 2020, pressing force: 50 t, filling opening width: 670 mm, filling opening length: 1,200 mm, bale length: 1,200 mm, bale weight: 450 kg, total width: 800 mm, total height: 800 mm, power: 7.5 kW (10.20 HP), empty load weight: 2,180 kg, input frequency: 50 Hz, Tested and ready for operation, Vertical baler Dixi 50S PET Year of manufacture: 2020 Bale dimensions (L x W x H, mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Specifications (L x W x H, mm): 1600 x 1300 x 3100 Loading opening (mm): 1200 x 670 Pressing force: 50 tons Ledpjwviz Nefx Afioah Power supply: 400 Volt Press immediately ready for use Net price plus VAT Delivery available at extra charge.

Condition: excellent (used), Year of construction: 2012, operating hours: 18,593 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,300 kg, input current: 470 A, overall weight: 47,000 kg, Technical data baler: Manufacturer Bollegraaf Typ HBC 140 K Year of construction 2012 Working hours 18.593 hours, stand September 2024 Press power main press 140 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 248 kW Full load current 470 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 2,750 x 8,270 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 47 tons Special equipment: 2-flap pre-compressor for large cardboard boxes and octatainers Wirbulator for magazines and books Technical data chain belt conveyor: Manufacturer Bollegraaf Type HBT 2250/2000 Year of manufacture 2008 Drive power 7.5 kW Length of feed belt 8,300 mm Length of ascending belt 19,250 mm Length of gooseneck 2,400 mm Incline 30° Useful width 1,960 mm Wall height of feed belt 500 mm Wall height of incline belt 800 mm Weight 16 t Scope of delivery: Bale press with pre-compressor and wirbulator Feeding conveyor Elevating conveyor with gooseneck Lodpfsu Thy Ejx Afieah Comments: The press with conveyor technology has already been dismantled, stored and is available at short notice. Viewings are possible by appointment. We accept no liability for technical specifications or any errors.

Condition: as good as new (ex-display), Year of construction: 2014, Perfect condition, newly repainted, fully tested, new wearing parts and oil, ready to use. We have 10 units Bale weight cardboard (kg) 80-110 Bale weight plastic foil (kg) 90-130 Bale size WxDxH (mm) 1000 x 700 x 800 Press force (t) 5 Lsdpfx Ajiw Dxpofijah Power supply 1x230V 50Hz 10A Motor (kW) 1.1 Noise Level (dB) 65-68 Cycle time avg. (sec) 33 Dimensions WxDxH (mm) 1360 x 895 x 2370 Weight (kg) 600 Feed opening WxH (mm) 1000 x 500 Filling height (mm) 915 Chamber height (mm) 1305 Stroke (mm) 750 Number of ties 3 Type of tying Twine Full bale light Yes Bale eject Automatic

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing force approx. 44 kN (4.5 tonnes) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Idle cycle time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Lajdpjwuk Nrefx Afioh Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Condition: excellent (used), Year of construction: 2018, Two balers, Bramidan X30 - second-hand - : Price (for both together) ex location: 17.500.-€ (net) Please note that one of the two balers has to be repaired - there is a cost estimate of approx. 1.500.-€ (net)! Manufacturer: Bramidan Type: X30 AD Machine number PEY395533 (second number on request) Year of construction: 2018 Pressing force: 30 t Bale size: WxDxH (mm) 1200 x 800 x 1000 FILLING OPENING: WxH (mm) 1090 x 655 BALE WEIGHT: Cardboard (kg) 275-350, plastic film (kg) 325-425 Recyclable material types: Cardboard, plastic film, paper, PET bottles, aluminum cans, tin cans, hard plastic, textiles, styrofoam. 3 x 230 - 400V, 50Hz, Amp: 25/16 db: 59-60 Weight: 1.650kg Condition: good - very good Available: immediately Location: 21465 Reinbek Laodetq Hrijpfx Afieh

Condition: used, Year of construction: 2011, operating hours: 11,140 h, functionality: fully functional, machine/vehicle number: 407.00.115, total width: 2,000 mm, total height: 3,000 mm, total length: 7,100 mm, transport height: 3,000 mm, transport width: 2,000 mm, transport length: 5,300 mm, Strautmann baler in very good condition. Baler is perfect for plastic material or paper. Making strong, good and symmetrical bales. Baler is ready to work, we are selling it because we don't need it anymore. Laodpfx Aewrr Svjfish

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 50 t, filling opening width: 1,200 mm, filling opening length: 600 mm, bale length: 1,200 mm, bale weight: 450 kg, total width: 800 mm, Inspected and ready for use, Orwak 3620 vertical baler, year of manufacture 2014. Bale dimensions (L x W x H mm): 1200 x 800 x 1000 - 1200. Bale weight (kg): approx. 450 kg. Specifications (L x W x H mm): 1900 x 1050 x 1980. Loading opening (mm): 1200 x 600. Pressing force 50 tons. Power supply 400 volts. Baler immediately ready for operation. Net price plus VAT. Delivery possible at extra cost. Lasdpfx Aowviupsfieh

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Laodpfx Aju Thhrsfieh Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 533.02.090, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 400 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH Laedpowq Ifvsfx Afieh The quoted price is plus statutory VAT, ex works and without packaging. The press is cleaned, function tested, repaired and equipped with a new control according to EN16500. All spare parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale size (LxWxH): 1180 x 700 x 800 mm External dimensions (LxWxH): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 400 mm Pressing pressure: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of band channels: 4 Weight of press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation site: indoors/outdoors, covered Including starter bale band set, 19mm Serial number: 533.02.090 Year of manufacture: 2002

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Lasdpfx Afora Nrmsish Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: reconditioned (used), Horizontal Press Baler DIXI 60 SLD Year of manufacture: 2014 Semi-automatic 60-ton baling system for economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard boxes Tetra packaging Foils Lodpfxsnfux Uo Afioah PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Feed opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of bindings: 3, with wire with quick release eyelets Drive power: 7.5 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press and wire stations. Laodpfoviwdmjx Afieh Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), power: 11 kW (14.96 HP), operation weight: 8,000 kg, Horizontal baler DIXI 80 SLD 2018-2021 Year of construction Semi-automatic 80-tonne baling system for the economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard packaging Tetra packaging Films PET bottles Foam Insulation boards Lsdpfx Asqa Dq Dsfioah and other compressible materials. Machine dimensions L x H x W approx. mm: 4,320 x 1830 x 2,154 mm Filling opening W x H (standard) mm: 1,040 x 1,110 mm Machine weight approx. kg: 8,000 Press force max. kN: 80 t / 800 kN Ironing cycle (average value) approx. s: 35 Bale size W x H x L approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Binding: manual Number of bindings: 4, with wire with Quicklink wire Drive power: 11 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation. The operating instructions are available and are supplied as a PDF file and in paper form.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 43,954 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 50,800 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 112 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. Lodpeu Thgzjfx Afisah The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.