Condition: good (used), clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Clamping table: with T-slots -Groove width: 20 mm, groove spacing 69 mm Cgslq Nrqovmm Aas Tst -Guide rail: with rack -Dimensions: see photos / technical drawing -Dimensions: 3300/285/H185 mm -Weight: 397 kg

Condition: excellent (used), Gear milling machine WMW ZFWZ 500 x 5 Gear Hobbing Machine in excellent working condition. The technical details are as follows - Make - WMW module Model - ZFWZ 500 x 5 Max. modules - 5 modules Max. Diameter of Gear - 500 mm Max. Width of Gear - 285 mm Table diameter - 460 mm Diameter of Gear (with Tail-stock) - 370 mm Hob Speed Range - 46 rpm to 216 rpm Table Bore - 70mm Motorized Rapid Travel of Hob-Carriage & Table. Complete with arbours, changing gears etc. Operating manual of the machine is available. Machine is in excellent working condition. WMW ZFWZ 500 x 5 Gear milling machine in excellent working condition. The technical specifications are as follows: Cjlqov Sd Ids Nrq Tjgt Manufacturer: WMW-Modul Model: ZFWZ 500 x 5 Max. module: 5 modules Max. gear diameter: 500 mm Max. gear width: 285 mm Table diameter: 460 mm Gear diameter (with tailstock): 370 mm Speed range: Milling cutter: 46 to 216 rpm Table bore: 70 mm Motorized rapid traverse of the milling cutter slide and table. Complete with arbors, change gears, etc. Operating instructions included.

Condition: excellent (used), Functionality: fully functional, total height: 94 mm, total length: 220 mm, total width: 125 mm, We are selling 7 Spreitzer MZR 220-125 centering vises. Each includes two base jaws with grip. The base jaws are in very good condition, cleaned, and oiled. Accessories Clamping Jaws The compact MZR centering vise series is used as a cost-effective clamping device for raw parts on multi-axis machining centers and automation systems. It is used wherever maximum centering and repeat accuracy is not required. The clamping range can be increased using the one-piece reversible jaws with integrated grip steps. Area of application: Cgelev Sak Ieq Nrq Tjt Single part and small-batch production Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material: Quenched and tempered tool steel

Condition: used, Jaw width: 125 mm Opening width: 150 mm The vice does not have a pipe clamp. Cgslqov Hcyzs Nrq Tot

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Transor system with 800-liter tank capacity. Equipped with three pumps and a filter tower. Available for immediate delivery. Cgslq Nsvuibnerq Tst Also included is a Transor with an 800-liter tank capacity and two cleaning towers.

Condition: new, Special price €2,500 instead of €3,410 excl. VAT. Dormatec AirBench FN066784A - Extraction Table Capacity: 1500 m³/h Filter Category: A Thanks to a wide range of filters, the extraction tables are suitable for all types of contamination (metal, plastic, stone, wood, glue fumes, etc.). Dust, steam, or fumes are immediately extracted through the work surface. The extraction tables are available in various sizes and configurations. All you need is a power outlet: plug & play! Like the FP model, the FN extraction table is a welded steel table with a load capacity of 150 kg on the tabletop and access to the filters is provided at the front of the table. - Industrial design - Robust welded filter housing made of 2 mm sheet steel - Steel surface made of 3 mm sheet steel - Perforated dia. 4 mm - Surface treatment: Powder coating in RAL 7035 (light gray) Filter: A - Non-sparking dust Aluminum, plastics, atmospheric dust, flour or similar, fiberglass, cleaning aircraft electronics Technical specifications: - Capacity: 1500 m³/h - Power: 0.17 kW - Suction area: 610 x 656 mm Colq Nrqevdruis Tsgt - Table dimensions W x H x D: 674 x 660 x 840 mm

Condition: used, Technical details: Cgslju R A A Ujq Nrq Tst floor-plate length: 640 mm plate width: 330 mm Plate thickness: 65 mm

Condition: excellent (used), WMW ZFWZ 500 x 5 Gear Hobbing Machine in excellent working condition. The technical details are as follows - Make - WMW module Model - ZFWZ 500 x 5 Max. modules - 5 modules Max. Diameter of Gear - 500 mm Max. Width of Gear - 285 mm Table diameter - 460 mm Celq Nrqjv Sd H Tj Togt Diameter of Gear (with Tail-stock) - 370 mm Hob Speed Range - 46 rpm to 216 rpm Table Bore - 70mm Motorized Rapid Travel of Hob-Carriage & Table. Complete with arbours, changing gears etc. Operating manual of the machine is available. Machine is in excellent working condition. WMW ZFWZ 500 x 5 Gear milling machine in excellent working condition. The technical specifications are as follows: Manufacturer: WMW-Modul Model: ZFWZ 500 x 5 Max. module: 5 modules Max. gear diameter: 500 mm Max. gear width: 285 mm Table diameter: 460 mm Gear diameter (with tailstock): 370 mm Speed range: Milling cutter: 46 to 216 rpm Table bore: 70 mm Motorized rapid traverse of the milling cutter slide and table. Complete with arbors, change gears, etc. Operating instructions included.

Condition: excellent (used), Functionality: fully functional, total height: 84 mm, total length: 120 mm, total width: 60 mm, We are selling 12 Spreitzer MZR 120-60 centering clamps. Each includes two base jaws with grip. The base jaws are in very good condition, cleaned, and oiled. Accessories Clamping Jaws The compact MZR centering clamp series is used as a cost-effective clamping device for raw parts on multi-axis machining centers and automation systems. It is used wherever maximum centering and repeatability are not required. The clamping range can be increased using the one-piece reversible jaws with integrated grip steps. Area of application: Colqjv R U T Uo Nrq Tsgt Single part and small-batch production Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material: Quenched and tempered tool steel

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 2 Plate thickness 400 mm weight of the machine ca. ca. 14 t Cgolqev Ey Nqs Nrq Tot dimensions of the machine ca. 8 x 3 x 0,4 m 2 pieces available. Plates does have 10 t- slots in length direction each 32 mm wide.

Condition: new, Year of construction: 2013, machine/vehicle number: TC359308, overall weight: 112 kg, Weiss TS320T indexing table complete with TS004E control board - NEW IN PACKAGING Number of stations 08; Speed ​​level F; Mounting position - horizontal; Gear position - underneath; Motor position - inside. Colq Njv Rm S Nerq Togt Power supply voltage 400/480V AC/three-phase User manual in English EC declaration of conformity The set also includes a new electronic TS004E control board. User manual in English

Condition: good (used), Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole Cgjlqjgl Rxxo Nrq Tet -Dimension box: 260/330/H80 mm -Weight: 2.3 kg

Condition: good (used), Machine vice heavy execution Designation S200 - 562 Cgjlq Nrqehlaigj Tjt Clamping jaws 200 x 60 mm Clamping width 250 mm Footprint 500 x 200 mm Height 150 mm Weight 52 kg

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Cgslqov Ev Dqe Nrq Tot Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition

Condition: excellent (used), Functionality: fully functional, total height: 94 mm, total length: 220 mm, total width: 80 mm, We are selling 10 Spreitzer MZR 220-80 centric clamps. These each include two base jaws with grip and center jaws. The base jaws are in very good condition, cleaned, and oiled. Accessories Clamping Jaws Center Jaws The compact MZR centric clamp series is used as a cost-effective clamping device for raw parts on multi-axis machining centers and automation systems. It is used wherever maximum centering and repeat accuracy is not required. The clamping range can be increased using the one-piece reversible jaws with integrated grip steps. Area of application: Single part and small-batch production Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material: Quenched and tempered tool steel Cgslq Nrjv R U Rasq Tjt

Condition: reconditioned (used), Hydraulic vice Fabr: Hilma Cgolq Nrqjg Dgv As Tet Jaw width: 200 mm

Condition: like new (used), It's in an excellent condition Celq Nrsv Rbxqjq Togt

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: 29 pieces -Model: ER32 -Sizes: 2-20 mm, see photo parts list -Sale: only for sale complete Cslsgk Dyweq Nrq Togt -Dimensions box: 350/175/H55 mm -Weight: 4.7 kg

Condition: used, Year of construction: 2010, Functionality: unexamined, Offered is an emulsion coolant system with a belt filter. Cgelq Nrqsv N U Ezs Tst Year of manufacture: 2010, flow rate: 500 l/min, power consumption: 21.2 kW. Further specifications can be found on the nameplate.

Condition: good (used), Jaws: 195 x 60 mm Clamping width: mm Footprint: 580 x 200 mm Height: mm Material: cast iron Weight: kg Cslq Nrqsq Ewt Ee Tsgt Total dimensions: 600 x 170 x 130 mm

Condition: new, Coolant mixer Cjleh D Rytoq Nrq Tjgt Make Hebro type ND 2305 unused in closed original packing flow rate at 4 Bar/20 L/min. 2 Bar 14 L/min

Condition: used, Year of construction: 2006, Automatic bar feeder: Celq Nrstrmtyeq Tsgt - Feed channel - Slide length LL - Bar length 3.2 m

Condition: as good as new (ex-display), Year of construction: 2015, length in total 3100 mm band width 300 mm conveying height 1000 total power requirement 0 kW Cgjlq Nrot R U Ubeq Tet weight of the machine ca. 0,32 t dimensions of the machine ca. 3,1 x 0,7 x 1,3 m

Condition: good (used), Bezel, stick, lynette Cjlq Nred S Iyusq Tsgt -max. passage: Ø 240 mm -Tip height: 290 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 760/130/H610 mm -Weight: 125 kg

Condition: used, Year of construction: 2007, FMB Turbo 3-36/3200/C Cslq Nrqoh Nf N Se Tegt Material rods diameter 3 – 38 mm Max. rod length: 3,200 mm Year of manufacture 2007 Weight without oil filling: approx. 750 kg