Used Accessories and spare parts for sale (299)

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Hfjdpfx Afefxg T Uoijn Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: used, Diameter: 630 mm Height: 170 mm Dividing head base on table: 690 mm Taper: Morse 5 / 65 mm Admissible weight: 550 kg Hedpew H Rmzjfx Afisfn Dividing head weight: 302 kg

Condition: like new (used), Manufacturer: Steinel Type: FVK 3 Mounting: MK Hjdpfx Aeugr Amefisfn Stop surface W x H: 260 x 420 mm Hole spacing at top: 165 mm Hole spacing at bottom: 200 mm Hole spacing at an angle: 110 mm Diameter inside: 130 mm Condition: very good Weight: 33 kg Dimensions: 260 x 230 x 420 mm

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 24 mm -26 teeth: belt width 32 mm -Quantity: 5x timing belt pulley available -Price: per piece -Dimensions: Ø 75 x 53 mm -Weight: 0.3 kg/pcs Hfedpjw E Ip Refx Afijn

Condition: used, max. ram stroke . mm no. of strokes . Hub/min head swivability . ° +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Hjdpfxoirazlo Afijfn Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Several measuring probes from Heidenhain are available for sale. - Manufacturer: Heidenhain - Type: TS110 / TS111 untested = €450 each TS110 / TS111 tested = €750 each Hfodpfshlafnex Afisn TS220 / TS230 = €950 each ! Since several probes are for sale, please specify the desired type! - Holder: SK50

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Hfsdpfx Afef Axn Usijn Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: good (used), 2 brackets for fixed bed milling machines Sizes: Hfjdpsudvh Iofx Afien -Square 1: 370x620x2000mm -Square 2: 370x615x2000mm

Condition: excellent (used), Schunk Here we offer you a utility separator. Technical data: Outer dimensions: Width: 1325 mm Width control column 565 mm Depth: 1300 mm Shuttle overhang 730 mm Height: 1870 mm Overhang light column top 350 mm Operator height 900 mm Speed: X,Y: linear motor axes 2000 mm/s Z: linear motor axes 1000 mm/s Weight approx. 1500 Kg. Accuracy repeatability: 0,02 mm Position accuracy: 0,02 mm Hsdpfx Afjikauisiofn Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working range Max cutting area X,Y 430 mm 350 mm Max effective size X,Y 430 mm 350 mm LP thickness 0.5 -3.2 mm Power supply 400V / 50 Hz / 16 A Condition: used / used Type: SAR-1300 B Scope of delivery: As shown (Changes and errors in technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown Hsdpfsw E Ip Dsx Afijfn -Hole: Ø 25 mm -26 teeth: belt width 32 mm -Quantity: 4x timing belt pulley available -Price: per piece -Dimensions: Ø 75 x 50 mm -Weight: 0.3 kg/pcs

Year of construction: 2000, condition: used, 3 Stück Hfsdpfx Afoupmwljijn Dimensions (L/W/H) siehe Bilder mm weight of the machine ca. . t

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Outlet Set 1, Set 2, Turm 3, We are offering the following in our outlet: 1) Our used steel mineral casting tower SMQ202060-R50 as a set for CHF 7,200.– (excluding VAT, payable prior to delivery; original price CHF 16,298.80). The base plate can be ordered separately and will be custom-made to size if required. The set includes the tower with two PowerClamp base rails and various modules: 1x SMQ202060R50, 4x TWPAS1240, 8x M12X40, 2x PCB4050600, 4x PS2F61N34-45, 8x B47HM, 6x PCU29060, 6x PS1R78N49-80, 6x B81, 10x PCU31077. 2) Our used mineral casting tower MQ202060R50 as a set at a special price of CHF 6,965.– (original price CHF 16,040.–). The set includes our mineral casting tower, two PowerClamp base rails, and various modules: 1x MQ202060R50, 1x GPL40040-UV, 4x TWPAS1240, 8x M12x40, 2x PCB4050600, 4x PS2F61N34-45, 8x B47HM, 6x PCU29060, 6x PS1R78N49-80, 6x B81, 10x PCU31077. Hfjdpfx Aew Dfunjfijn 3) Our used mineral casting tower MK401890R50 at a special price of CHF 3,850.– (original price CHF 9,600.–). The mineral casting tower MK401890R50 is in very good condition. The base plate can be ordered separately and will be custom-made to size if required. Drawings for the towers can be found below (PDF documents).

Condition: used, FORKARDT F 200 Milling Machine Attachment Hsdpfx Afeq Ehqusisfn

Condition: used, 52 used recordings Hfjdpfswufuvox Afijn

Condition: used, table length 1000 mm Hfodpjn Nc Nbefx Afien table width 475 mm table height 145 mm

Condition: good (used), Clutch gear, gear clutch, slip hub, slip clutch -Manufacturer: Mayr, ROBA slip hub slip clutch Hfodjrub Htjpfx Afien -Type: 3/100,210 -Sprocket: Duplex 30 teeth -Dimensions: see photos -Total dimensions: Ø 158 x 70 mm -Weight: 4.4 kg

Condition: like new (used), Tool breakage Mini receiver 87.0634-022-A2 "good used" Tool breakage Mini receiver 87.0634-012-A2 "New" About us: Comprehensive service for your individual needs Nolte Engineering GmbH is a medium-sized company based in Langenfeld, North Rhine-Westphalia. We have been offering our customers a comprehensive service for machines and systems for over 20 years. Our team consists of experienced and highly qualified specialists who are passionate and committed to your needs. Our services Our range of services includes Hsdoru E I Iopfx Afijfn Maintenance and servicing of machines and systems of all kinds -Repairs of mechanical, electrical and electronic components -Procurement and delivery of spare parts -Technical advice and support -Optimization of machines and systems -Preventive maintenance

Condition: new, diameter / mm Cutting (quantity) / weight / kg Rotor type: rotor FK.213.570 11 05.01 MAT number: 000.213.570 Condition: new Hfedpfxou Dbz Ao Afion incl. test report

Condition: good (used), Bezel, steady rest, lynette Hjdpewyvbwofx Afisfn -Clamping tool: clamping bracket -Clamping width: 272 mm -Holes: Ø 24 mm -Dimensions: see photo technical drawing -Dimensions: 300/125/H50 mm -Weight: 8.9 kg

Condition: refurbished (used), Kessler Motor Spindle HSK-A63 Spindle in Exchange Type: DMS 112.40.4.FFB/S 000.619.779 Speed: 12,000 rpm Kessler Motor Spindle SK40 DMS 112.40.4. FFB/S 000.630.762 Installation available upon request About us: Hodperunqrjfx Afiofn Comprehensive service for your individual requirements Nolte Engineering GmbH is a medium-sized company based in Langenfeld, North Rhine-Westphalia. For over 20 years, we have been offering our customers comprehensive service for machines and equipment. Our team consists of experienced and highly qualified professionals who are passionate and dedicated to serving your needs. Our Services Our range of services includes: -Maintenance and servicing of all types of machinery and equipment -Repairs of mechanical, electrical, and electronic components -Procurement and delivery of spare parts -Technical consulting and support -Optimization of machines and equipment -Preventive maintenance

Condition: used, table length 1000 mm Hodpsrrzkhjfx Afijfn table width 475 mm table height 145 mm

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table -Manufacturer: Stankoimport, round table -Clamping surface: Ø 250 mm -Center hole: Ø 30 mm -Groove width: 12 mm -Dimensions: 495/340/H150 mm Hedjwxaguepfx Afijfn -Weight: 54 kg

Condition: good (used), Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Number: 1x clamping angle available -Price per piece Hfodjlcfi Hopfx Afion -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.

Condition: good (used), Flat belt pulley, belt pulley, drive pulley, roller pulley -Pulley: Flat belt pulleys 7 pieces -Width 70 mm Hodjwuzk Hjpfx Afisfn -Hole: Ø 18 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions box: 430/210/H115 mm -Weight: 11 kg

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: clamping surface: Ø 120 mm -Groove width: 14 mm -Dimensions: 210/160/H140 mm Hedpfxewuybkj Afiefn -Weight: 5.7 kg