Used accessories and spare parts for milling machines for sale (277)

Condition: good (used), Universal milling angle head, milling angle head -Recording: MK4 -Drive mount: MK5 -Angle head: swiveling Lodpfxoc Sc Iks Ab Asru -Dimensions: 440/300/H310 mm -Weight: 68 kg

Condition: used, turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table -Tactical table: pneumatic -Clamping surface: Ø 270 mm -Division: 24 -Dimensions: 500/130/H280 mm -Weight: 35.7 kg Ljdju Aigdopfx Ab Asru

Condition: new, diameter / mm Cutting (quantity) / weight / kg Lredou Dbz Aopfx Ab Aou Rotor type: rotor FK.213.570 11 05.01 MAT number: 000.213.570 Condition: new incl. test report

Condition: used, Flat belt pulley, toothed pulley, multi-belt pulley Lredpfxoffh Nzo Ab Aou -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill Ljdpfx Ajb Iwrijb Aeru -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Condition: used, Sheet metal cabinet with hinged door, LID Original lid for the accessory cabinet Lid for FP1 / FP2 / FP3 with 2 sliding shelves without contents Lsdpfeznn Hxjx Ab Aeru Length: 1000 mm Width: 750 mm Height: 960 mm

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 with SK40-S20x2, suitable for DECKEL milling machine FP1, FP2, FP3, or FP4 Maximum speed: 6000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Overhang: 110 mm (machine spindle to clamping nut) Tool holder: SK 40 - S20x2 Lsdpfofxg T Ujx Ab Aoru Collets: Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm in a wooden storage box The head is equipped with bronze gears for high torque. Weight: 5 kg Total weight: 9.4 kg in good condition

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 12 mm -rotatable -tiltable and swivelling via cranks -Fits Deckel Mikron WMW and other milling machines -Weight: 200 kg -Quantity: 1 available Price: per piece Ledpfxeb A Iyuj Ab Ajru

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Ledpfob A H Rbox Ab Aeru -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm -Number: 1 piece available

Condition: used, Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V Lrodpfxogxcuqs Ab Asu -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps Lodsxy H E Dopfx Ab Aoru -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available -Dimensions: 400/200/125 mm -Weight: 6.8 kg

Condition: as good as new (ex-display), Carbide milling cutter Lodpfx Abodwbkls Aoru Manufacturer: Prototyp H 4 1200 17 -10 -2 10 x 22 / R 2 2 pieces available

Condition: good (used), Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg Ljdpfx Abeb A Nu Ro Aoru

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown Lredpfsw E Ip Dex Ab Aeu -Hole: Ø 25 mm -26 teeth: belt width 32 mm -Quantity: 4x timing belt pulley available -Price: per piece -Dimensions: Ø 75 x 50 mm -Weight: 0.3 kg/pcs

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 24 mm -26 teeth: belt width 32 mm -Quantity: 5x timing belt pulley available -Price: per piece Ljdpsw E Ip Rjfx Ab Aoru -Dimensions: Ø 75 x 53 mm -Weight: 0.3 kg/pcs

Condition: new, The Duplex stops allow angle cuts from 0-90° very quickly, precisely and continuously. When set to 45°, the miter can be cut on both sides of the workpiece without adjusting the two stops. The dimensions are set using a magnifying glass and a measuring scale for length compensation. All DUPLEX variants can be easily positioned along the entire length of the carriage. No. M64060 Ledpfovyup Ijx Ab Aoru

Condition: good (used), Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, various designs -Slot width: 15/18 mm (see photos) Lsdpfxet Rl U Sj Ab Aeru -Submission/Price: complete -Dimensions: 150/42/H26 mm 2 pcs / 200/50/30 mm 4 pcs / 200/49/30 mm 4 pcs -Transport dimensions: 200/190/H105 mm -Weight: 12.8 kg

Condition: good (used), Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm Ljdpefxlf Aofx Ab Asru -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Condition: new, New bellows (guide rail covers) for tool milling machines from the TOS/INTOS Zebrak production line. Please specify the exact machine type when making inquiries. Other spare parts are also available. Lredsdx Rfvjpfx Ab Aou

Condition: used, mechanically switchable clutch, releasable clutch, power clutch, clutch Lredpfot Dddfsx Ab Aeu -Manufacturer: SEW-Eurodrive, motor/gearbox coupling housing with claw coupling -Use: for gear units SEW-Eurodrive type LP112 or similar -Claw coupling: KTR Rotex 38 -Flange: Ø 250 mm bolt circle Ø 215 x 14 mm -Recess: Ø 180 mm, dimensions/individual components see photos -Dimensions: Ø 250 x 225 mm -Weight: 19 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm Ledpfx Absuqf Nvj Aeru -Weight: 4.1 kg / 3.9 kg

Condition: used, clamping height 45 to 90 mm width of T-slots 12 mm 2 units/pieces at complete price Lrsdpfx Absvimv Sj Aou weight approx. 2.3 kg

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Lredpfxjxcbl Dj Ab Aju Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: used, can be moved manually Lsdpfx Ajccxgwob Asru Table or base plate size (same size): 460 x 150 mm Overall height: 45 mm Weight (measured): Guide shows slight scoring!

Condition: new, Year of construction: 2026, The CORMAK 4MT collet chuck set with 8 × ER collets (Ø4–16 mm) is a precision tool designed for holding ER-type tooling of different diameters. It features a 4MT taper and an M14 drawbolt, ensuring a solid and accurate fit in the machine spindle. The set is supplied with a spanner for the chuck nut and a practical transport case for comfortable use and easy storage. Collet chuck with nut for ER collets Lrjdpfx Aeycqr Usb Aou 4MT taper mounting Through drawbolt M14 ER collets Collet length: 45 mm Collet diameter: 24 mm Collet size range 4–16 mm: 4 5 6 8 10 12 14 16 Set includes: Collet chuck holder 4MT/M14 8 × ER collets Spanner for chuck nut Transport case (please note: depending on supply, the case may be made of PVC or wood)